TOSHIBA CTX100 and CTX670 QUICK REFERENCE MANUAL
Hot Dialing
1. To make a call using Hot Dialing, dial 9 and the number.
2. When connected, you can continue speakerphone
operation or lift the handset and continue the
conversation
Spkr Button
1. To make a call, press
2. Dial the number.
3. When connected, you can continue to use the
speakerphone or lift the handset and continue the
conversation.
Handset
1. To make a call, lift the handset, then dial 9 and the number.
2. When connected, you can continue to use the handset
or switch to speakerphone by press
replacing the handset.
Answering a Call
. Lift the handset or press
.
If you don't have Ringing Line Preference: press the
flashing line or extension button and lift the handset.
Handsfree Answerback
.
To receive a handsfree internal call over the speakerphone
1. You hear a single long tone, then the caller.s voice. Do
not lift the handset; speak toward the telephone in a
normal voice.
2. Press
or take the handset off-hook if you wish to
Spkr
transfer the call or place it on hold.
.
To switch between Handset and Speakerphone
. Press
and place the handset on-hook to switch
Spkr
from Handset to Speakerphone mode.
Call Transfer
1. While on a call, press C
2. Dial the extension and announce the call or .blind
transfer. (hang up).
During call transfer, you can reconnect to the original
caller by pressing your flashing extension button.
Conference Calls
1. While on a call, press
2. Call another station or outside line.
3. When the called party answers, press
busy or there's no answer, press
to the original connection. All parties are conferenced.
4. Repeat the above steps to add more lines.
Note When the person who initiates the conference
(master) hangs up, control transfers to the first
internal station added to the conference. If no internal
stations are in the conference, the call disconnects.
.
Spkr
and
Spkr
.
Spkr
/T
NF
RN
.
Cnf/Trn
. If it.s
Cnf/Trn
Cnf/Trn
again to return
Page 1 of 4