Equipment Description - Lang 124T Installation And Operation Instructions Manual

Thermostatic electric griddle

Hide thumbs Also See for 124T:

Table of Contents

EQUIPMENT DESCRIPTION

Grease Pan

Feet

Exterior Construction

The griddle dimensions are 7" (43.8cm) High, 30" (76.20cm) Deep, and width is dependent on the

actual model number.

The Sides, Bottom, and Rear wall are constructed of double wall stainless steel, which allows closer

installation to combustible surfaces.

The griddle surface is made of " thick, highly polished steel to reduce hot and cold spots, recovery

problems, warping, and ensure even heat to the edges of the griddle.

Controls

Each twelve-inch section has its own temperature dial that snaps into place to lock in any temperature

from 75°F to 450°F (79°C to 232°C) in 25° increments.

Each twelve-inch section of the griddle is controlled by an area sensitive RTD probe, which can sense

and react to a temperature change of +/- 4°F.

Each twelve-inch section has a set of 6 K.W. elements for high efficiency, quick recovery and outstanding

performance

Technical

The 00 series thermostat griddle operates on either 208, 220, 240, 380, 440 or 480V, are shipped three

phase, (unless in specific specifications). 208, 220, 240V can be field converted to single phase.

Minimum clearances: 2" from side and back

NOTICE

The data plate is on the right side of the griddle. The griddle voltage,

wattage, serial number, wire size, and clearance specifications are on

the data plate. This information should be carefully read and understood

before proceeding with the installation.

Griddle Surface

Gutter

Section

Temp. Dial

Section

Pilot Light

IL1553

Table of Contents

124tc 124the 124tr 124tss 136t 136tc ... Show all