hit counter script
Download
Share
Print this page
ABB RET670 Product Manual
  1. Manuals
  2. Brands
  3. ABB Manuals
  4. Protection Device
  5. RELION RET670
  6. Product manual
ABB RET670 Product Manual

ABB RET670 Product Manual

Hide thumbs Also See for RET670:

Advertisement

Quick Links

See also: Operator's Manual , Product Manual
®
Relion
670 series
Transformer protection RET670
Pre-configured
Product Guide

Advertisement

loading

Related Manuals for ABB RET670

Summary of Contents for ABB RET670

  • Page 1 ® Relion 670 series Transformer protection RET670 Pre-configured Product Guide...

  • Page 2: Table Of Contents

    5. Hardware description.........27 Disclaimer The information in this document is subject to change without notice and should not be construed as a commitment by ABB AB. ABB AB assumes no responsibility for any errors that may appear in this document.

  • Page 3: Application

    1. Application as tertiary bus protection and so on. Tripping from Pressure relief / Buchholz and RET670 provides fast and selective temperature devices can be done through the protection, monitoring and control for two- transformer IED where pulsing, lock-out and three-winding transformers, contact output and so on, is performed.
  • Page 4 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 configuration tool ensures simple and fast The packages are configured and ready for testing and commissioning. direct use. Optional functions are not configured but a maximum configuration...
  • Page 5 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 TRIP BUSBAR 50BF 3I> 51/67 3I> 94/86 TRIP CB1 I->O 51N/67N IN> IdN/I> 3Id/I> IdN/I> 51N/67N IN> 51/67 3I> 94/86 50BF TRIP CB2 I->O 3I> SC/VC 3U>...
  • Page 6 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 TRIP BUSBAR&CB2 TRIP CB1/3 50BF 51/67 3I> 50BF 3I> 94/86 3I> TRIP CB1 I->O 51N/67N 94/86 IN> TRIP CB2 I->O IdN/I> 3Id/I> IdN/I> 51N/67N IN> 51/67 3I>...
  • Page 7 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 TRIP BUSBAR 50BF 3I> 51/67 3I> 94/86 TRIP CB1 I->O 51N/67N IN> IdN/I> 3Id/I> 50BF IdN/I> TRIP BUSBAR 3I> &CB1/2 51N/67N IN> 3I> 51/67 3I> 94/86...
  • Page 8 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 TRIP BUSBAR&CB2/3/4 50BF TRIP CB1/3/4/X 51/67 3I> 50BF 3I> 94/86 3I> TRIP CB1 I->O 51N/67N 94/86 IN> TRIP CB2 I->O IdN/I> 3Id/I> 50BF IdN/I> TRIP BUSBAR 3I>...

  • Page 9: Available Functions

    Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 2. Available functions Function description Transformer Voltage Single Multi Single Multi back-up control breaker, 2 breaker, 2 breaker, 3 breaker, 3 protection (A25) winding winding winding...
  • Page 10 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Function description Transformer Voltage Single Multi Single Multi back-up control breaker, 2 breaker, 2 breaker, 3 breaker, 3 protection (A25) winding winding winding winding (A10) (A30)
  • Page 11 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Function description Transformer Voltage Single Multi Single Multi back-up control breaker, 2 breaker, 2 breaker, 3 breaker, 3 protection (A25) winding winding winding winding (A10) (A30)

  • Page 12: Functionality

    Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Function description Transformer Voltage Single Multi Single Multi back-up control breaker, 2 breaker, 2 breaker, 3 breaker, 3 protection (A25) winding winding winding winding (A10) (A30)
  • Page 13 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Stabilization is included for inrush currents respectively for overexcitation condition. two-winding Adaptive stabilization is also included for power system recovery inrush and CT saturation for transformer with external faults.
  • Page 14 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 limit. Due to environmental considerations, the rate of expansion and reinforcement of the power system is reduced, for example, difficulties to get permission to build new power lines.
  • Page 15 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 The distance protection zones can operate, Power swing detection ZMRPSB independent of each other, in directional (forward or reverse) or non-directional mode. Power swings may occur after disconnection This makes them suitable, together with of heavy loads or trip of big generation plants.
  • Page 16 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 with the reach limited to less than typical equipment might be damaged. The insulation eighty percent of the transformer impedance within the transformer/generator will have at minimum source impedance. EFPIOC can forced ageing.
  • Page 17 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Voltage protection Pole discordance protection CCRPLD Single pole operated circuit breakers can due Two step undervoltage protection to electrical or mechanical failures end up UV2PTUV with the different poles in different positions Undervoltages can occur in the power system (close-open).
  • Page 18 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 SAPTOF is used mainly for generation Overexcitation protection OEXPVPH shedding and remedial action schemes. It is also used as a frequency stage initiating load When the laminated core of a power restoring.
  • Page 19 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 The general function suits applications with The method based on detection of negative underimpedance and voltage controlled sequence voltage without any negative overcurrent solutions. The general function sequence current.
  • Page 20 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 evaluation of conditions from other functions regulation of the voltage on the secondary such as interlocking, synchrocheck, operator side of transformers or alternatively on a load place selection and external or internal point further out in the network.
  • Page 21 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 VSGGIO can be controlled from the menu or residual overcurrent protection (ECRWPSCH) from a symbol on the single line diagram function. (SLD) on the local HMI.
  • Page 22 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 sufficient length, as well as all functionality outputs where one is inverted. The memory necessary for correct co-operation with setting controls if the block after a power autoreclosing functions.
  • Page 23 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 time to the end of post-fault time will be Supervision of mA input signals (MVGGIO) included in the recording. The main purpose of the function is to...
  • Page 24 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 The event recorder logs all selected binary operation of protection functions. It can input signals connected to the Disturbance record disturbances not detected by report function. Each recording can contain protection functions.
  • Page 25 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 by the binary input module and then read by the pulse counter function. A scaled service value is available over the station bus. The special Binary input module with enhanced pulse counting capabilities must be ordered to achieve this functionality.
  • Page 26 Serial communication, LON vertical communication to station HMI and Existing stations with ABB station bus LON gateway and as interface for horizontal peer- can be extended with use of the optical LON to-peer communication (over LON only).

  • Page 27: Hardware Description

    Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 kbit/s resp 2Mbit/s operation. The converter channels are used for applications where is delivered with 19” rack mounting short operating time is essential. Eight accessories. optically isolated binary inputs cater for required binary input information.
  • Page 28 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 secondary currents and voltages generated by Galvanic RS485 serial communication the measuring transformers. The module has module twelve inputs in different combinations of The galvanic RS485 serial communication currents and voltage inputs.
  • Page 29 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 xx05000004.vsd IEC05000004 V1 EN Figure 9. Side-by-side mounting Case size 6U, 1/2 x 19” 265.9 223.7 201.1 242.1 252.9 205.7 6U, 3/4 x 19” 265.9 336.0 201.1 242.1...

  • Page 30: Connection Diagrams

    Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 6. Connection diagrams Table 1. Designations for 1/2 x 19” casing with 1 TRM slot Module Rear Positions BIM, BOM, SOM or IOM X31 and X32 etc. to X51...
  • Page 31 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 2. Designations for 3/4 x 19” casing with 2 TRM slot Module Rear Positions BIM, BOM, SOM, IOM or X31 and X32 etc. to X71 and...
  • Page 32 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 3. Designations for 1/1 x 19” casing with 2 TRM slots Module Rear Positions BIM, BOM, SOM, X31 and X32 etc. to X131 IOM or MIM...
  • Page 33 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 IEC08000479 BG V1 EN Figure 10. Transformer input module (TRM) ￭ Indicates high polarity CT/VT-input designation according to figure AI01 AI02 AI03 AI04 AI05 AI06 AI07...
  • Page 34 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 IEC08000484 BG V1 EN Figure 12. mA input module (MIM) IEC08000480 BG V1 EN Figure 11. Binary input module (BIM). Input contacts named XA corresponds to...
  • Page 35 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 IEC08000477 BG V1 EN Figure 13. Communication interfaces (OEM, LDCM, SLM and HMI) Note to figure Rear communication port SPA/IEC 61850-5-103, ST-connector for glass alt. HFBR Snap-in connector for plastic as ordered Rear communication port LON, ST connector for glass alt.
  • Page 36 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 IEC08000478 BG V1 EN Figure 15. GPS time synchronization module (GSM) IEC08000481 BG V1 EN Figure 16. Binary output module (BOM). Output contacts named XA corresponds to rear position X31, X41, and so on, and output contacts named XB to rear position X32, X42, and so on.
  • Page 37 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 IEC08000482 BG V1 EN Figure 17. Static output module (SOM) IEC08000483 BG V1 EN Figure 18. Binary in/out module (IOM). Input contacts named XA corresponds to rear position X31, X41, and so on, and output contacts named XB to rear position X32, X42, and so on.
  • Page 38 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 BUS A BUS B BBP-TRIP QB1-OPEN QB1-CL BLOCK LW 3I> QB2-OPEN BBP STEP -QB1 QB2-CL -QB2 ST BFP 3PH BUCH TRIP SUDDEN P -QA1 OT TRIP...
  • Page 39 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 BUS A -QB1 BBP-TRIP QB1-OPEN QB1-CL BLOCK LW 3I> QB6-OPEN BBP STEP -QB62 QB6-CL ST BFP 3PH -BI1 TRM1:4-6 BUCH TRIP -QA1 SUDDEN P CLOSE QA1...
  • Page 40 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 BUS A BUS B BBP-TRIP QB1-OPEN QB1-CL ST BFP QB2-OPEN -QB1 QB2-CL BLOCK TW 3I> -QB2 BBP STEP BUCH TRIP -QA1 SUDDEN P CLOSE QA1 OT TRIP...
  • Page 41 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 BUS A TO SECOND BAY -QB1 BBP-TRIP QB1-OPEN QB1-CL BLOCK TW 3I> QB62-OPEN BBP STEP -QB62 QB62-CL ST BFP 3PH -BI1 BUCH TRIP TRM1:4-36 -QA1 SUDDEN P...

  • Page 42: Technical Data

    Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 7. Technical data General Definitions Reference The specified value of an influencing factor to which are referred the value characteristics of the equipment Nominal The range of values of an influencing quantity (factor) within which, under...
  • Page 43 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 5. MIM - mA input module Quantity: Rated value: Nominal range: Input resistance = 194 Ohm Input range ± 5, ± 10, ± 20mA 0-5, 0-10, 0-20, 4-20mA Power consumption £...
  • Page 44 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Binary inputs and outputs Table 8. BIM - Binary input module Quantity Rated value Nominal range Binary inputs RL ± 20% DC voltage, RL 24/40 V 48/60 V RL ±...
  • Page 45 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 10. IOM - Binary input/output module Quantity Rated value Nominal range Binary inputs RL ± 20% DC voltage, RL 24/40 V 48/60 V RL ± 20% 110/125 V RL ±...
  • Page 46 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 12. SOM - Static Output Module (reference standard: IEC 61810-2): Static binary outputs Function of quantity Static binary output trip Rated voltage 48 - 60 VDC...
  • Page 47 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 13. SOM - Static Output module data (reference standard: IEC 61810-2): Electromechanical relay outputs Function of quantity Trip and signal relays Max system voltage 250V AC/DC...
  • Page 48 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Influencing factors Table 15. Temperature and humidity influence Parameter Reference value Nominal range Influence Ambient +20 °C -10 °C to +55 °C 0.02% /°C temperature, operate...
  • Page 49 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Type tests according to standards Table 18. Electromagnetic compatibility Test Type test values Reference standards 1 MHz burst disturbance 2.5 kV IEC 60255-22-1, Class III Ring wave immunity test...
  • Page 50 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 19. Insulation Test Type test values Reference standard Dielectric test 2.0 kV AC, 1 min. IEC 60255-5 5 kV, 1.2/50 ms, 0.5 J Impulse voltage test Insulation resistance >100 MW at 500 VDC...
  • Page 51 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Differential protection Table 23. Transformer differential protection T2WPDIF, T3WPDIF Function Range or value Accuracy Operating characteristic Adaptable ± 2.0% of Ir for I < Ir ± 2.0% of Ir for I > Ir Reset ratio >...
  • Page 52 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 24. Restricted earth fault protection, low impedance REFPDIF Function Range or value Accuracy Operate characteristic Adaptable ± 2.0% of Ir for I < IrBase ± 2.0% of I for I > IrBase Reset ratio >95%...
  • Page 53 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Impedance protection Table 26. Distance measuring zone, Quad ZMQPDIS Function Range or value Accuracy Number of zones 4 with selectable direction Minimum operate (5-30)% of IBase...
  • Page 54 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 27. Full-scheme distance protection, Mho characteristic ZMHPDIS Function Range or value Accuracy Number of zones with 4 with selectable selectable directions direction Minimum operate current (10–30)% of I...
  • Page 55 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 28. Full-scheme distance protection, quadrilateral for earth faults ZMMPDIS Function Range or value Accuracy Number of zones 4 with selectable direction - Minimum operate current (10-30)% of IBase (0.50-3000.00) W/phase...
  • Page 56 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 29. Phase selection with load encroachment, quadrilateral characteristic Function Range or value Accuracy Minimum operate current (5-30)% of IBase ± 1.0% of IBase Reactive reach, positive (0.50–3000.00) Ω/phase...
  • Page 57 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 31. Power swing detection ZMRPSB Function Range or value Accuracy (0.10-3000.00) W/phase Reactive reach ± 2.0% static accuracy Conditions: Voltage range: (0.1-1.1) x U Current range: (0.5-30) x I...
  • Page 58 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 33. Four step phase overcurrent protection OC4PTOC Function Setting range Accuracy ± 1.0% of I at I £ I Operate current (1-2500)% of lBase ± 1.0% of I at I > I Reset ratio >...
  • Page 59 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 34. Instantaneous residual overcurrent protection EFPIOC Function Range or value Accuracy ± 1.0% of I at I £ I Operate current (1-2500)% of lBase ± 1.0% of I at I > I Reset ratio >...
  • Page 60 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 35. Four step residual overcurrent protection EF4PTOC Function Range or value Accuracy ± 1.0% of I at I £ I Operate current (1-2500)% of lBase ±...
  • Page 61 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 36. Sensitive directional residual overcurrent and power protection SDEPSDE Function Range or value Accuracy ± 1.0% of I at I £ I (0.25-200.00)% of lBase Operate level for 3I ·cosj...
  • Page 62 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 36. Sensitive directional residual overcurrent and power protection SDEPSDE , continued Function Range or value Accuracy Operate time, non 60 ms typically at 0 to 2 x I...
  • Page 63 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 38. Breaker failure protection CCRBRF Function Range or value Accuracy ± 1.0% of I at I £ I Operate phase current (5-200)% of lBase ± 1.0% of I at I > I Reset ratio, phase current >...
  • Page 64 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 41. Directional overpower protection GOPPDOP Function Range or value Accuracy Power level (0.0–500.0)% of S ± 1.0% of S at S < S base ± 1.0% of S at S > S At low setting: (0.5-2.0)% of S...
  • Page 65 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 44. Two step overvoltage protection OV2PTOV Function Range or value Accuracy Operate voltage, low and (1-200)% of Ubase ± 1.0% of U at U < U high step ±...
  • Page 66 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 46. Overexcitation protection OEXPVPH Function Range or value Accuracy Operate value, start (100–180)% of (Ubase/f ± 1.0% of U rated Operate value, alarm (50–120)% of start level ±...
  • Page 67 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Frequency protection Table 48. Underfrequency protection SAPTUF Function Range or value Accuracy Operate value, start function (35.00-75.00) Hz ± 2.0 mHz Operate time, start function 100 ms typically...
  • Page 68 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Multipurpose protection Table 51. General current and voltage protection (GAPC) Function Range or value Accuracy Measuring current input phase1, phase2, phase3, PosSeq, NegSeq, 3*ZeroSeq, MaxPh, MinPh, UnbalancePh,...
  • Page 69 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 51. General current and voltage protection (GAPC), continued Function Range or value Accuracy Voltage level where voltage (0.0 - 5.0)% of U ± 1.0% of U...
  • Page 70 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 51. General current and voltage protection (GAPC), continued Function Range or value Accuracy Undervoltage: Critical impulse time 10 ms typically at 2 to 0 x U...
  • Page 71 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Control Table 54. Synchronizing, synchrocheck and energizing check SESRSYN Function Range or value Accuracy Phase shift, j (-180 to 180) degrees line (0.40-25.000) % of UBase...
  • Page 72 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 55. Voltage control TR1ATCC, TR8ATCC, TCMYLTC and TLCYLTC Function Range or value Accuracy Transformer reactance (0.1–200.0)Ω, primary Time delay for lower command (1.0–100.0) s when fast step down mode is...
  • Page 73 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 55. Voltage control TR1ATCC, TR8ATCC, TCMYLTC and TLCYLTC, continued Function Range or value Accuracy Alarm level of active power in (-9999.99–9999.99) MW ± 1.0% of S...
  • Page 74 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 57. Current reversal and weak-end infeed logic for residual overcurrent protection ECRWPSCH Function Range or value Accuracy Operating mode of WEI logic Echo Echo & Trip...
  • Page 75 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 59. Configurable logic blocks Logic block Quantity with cycle time Range or value Accuracy fast medium normal LogicAND LogicOR LogicXOR LogicInverter LogicSRMemory LogicGate LogicTimer (0.000–90000.000) s ±...
  • Page 76 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 61. Supervision of mA input signals (MVGGIO) Function Range or value Accuracy mA measuring function ± 5, ± 10, ± 20 mA ± 0.1 % of set value ± 0.005 mA...
  • Page 77 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 63. Disturbance report DRPRDRE Function Range or value Accuracy Pre-fault time (0.05–1.00) s Post-fault time (0.1–10.0) s Limit time (0.5–10.0) s Maximum number of recordings...
  • Page 78 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 65. Indications Function Value Buffer capacity Maximum number of indications presented for single disturbance Maximum number of recorded disturbances Table 66. Event recorder Function Value...
  • Page 79 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 70. Energy metering ETPMMTR Function Range or value Accuracy Energy metering kWh Export/Import, Input from MMXU. No extra error kvarh Export/Import at steady load Station communication Table 71.
  • Page 80 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 75. SLM – LON port Quantity Range or value Optical connector Glass fibre: type ST Plastic fibre: type HFBR snap-in Fibre, optical budget Glass fibre: 11 dB (1000 m typically *)
  • Page 81 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 78. Line data communication module Characteristic Range or value Type of LDCM Short range Medium range Long range (LR) (SR) (MR) Type of fibre Graded-index Singlemode Singlemode 9/125 µm...
  • Page 82 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 79. Case Material Steel sheet Front plate Steel sheet profile with cut-out for HMI Surface treatment Aluzink preplated steel Finish Light grey (RAL 7035) Table 80. Water and dust protection level according to IEC 60529...
  • Page 83 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Basic IED functions Table 84. Self supervision with internal event list Data Value Recording manner Continuous, event controlled List size 1000 events, first in-first out Table 85. Time synchronization, time tagging...
  • Page 84 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 88. IRIG-B Quantity Rated value Number of channels IRIG-B Number of channels PPS Electrical connector IRIG-B Optical connector PPS and IRIG-B Type ST Type of fibre 62.5/125 μm multimode fibre...
  • Page 85 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 90. IEC Inverse time characteristics Function Range or value Accuracy Operating characteristic: k = (0.05-999) in steps of 0.01 æ ö ç ÷ × ç...
  • Page 86 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 91. RI and RD type inverse time characteristics Function Range or value Accuracy RI type inverse characteristic k = (0.05-999) in steps of 0.01 IEC 60255-3, class 5 + 40 ms ×...
  • Page 87 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 92. Inverse time characteristics for Two step undervoltage protection (PUVM, 27) Function Range or value Accuracy Type A curve: k = (0.05-1.10) in steps of Class 5 +40 ms 0.01...
  • Page 88 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 93. Inverse time characteristics for Two step overvoltage protection (POVM, 59) Function Range or value Accuracy Type A curve: k = (0.05-1.10) in steps of Class 5 +40 ms 0.01...
  • Page 89 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Table 94. Inverse time characteristics for Two step residual overvoltage protection (POVM, 59N) Function Range or value Accuracy Type A curve: k = (0.05-1.10) in Class 5 +40 ms steps of 0.01...

  • Page 90: Ordering

    Exemple code: RET670*1.1-A30-A01B02D02D03F02-X0-A-A-B-A-A5X0-DAX-X-XD. Using the code of each position #1-12 specified as RET670*1-2 2-3 3 3 3 3 3 3-4 4-5-6-7 7-8-9 9 9-10 10 10 10 10 10 10 10 10 10 10 10 10 10-11 11 11 11 11 11-12 12...
  • Page 91 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Software options Notes and Rules No option All fields in the ordering form do not need to be filled in Restricted earth fault Note: A01 only for A40/B40...
  • Page 92 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 First HMI language Notes and Rules English IEC English US Additional HMI language No second HMI language German Russian French Spanish Italian Polish Hungarian Czech Swedish Selection for position #4.
  • Page 93 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Connection type for Analog modules Notes and Rules Compression terminals Ringlug terminals Analog system First TRM, 9I+3U 1A, 110/220V Note: Not in A25 First TRM, 9I+3U 5A, 110/220V...
  • Page 94 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Binary input/output module, mA Notes and Rules and time synchronizating boards. Note: 1BIM and 1 BOM included In A31/A32/B31/B32, 1 IOM basic in A21. Slot position (rear view)
  • Page 95 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Remote end communication, DNP serial comm. Notes and Rules and time synchronization modules Slot position (rear view) Available slots in 1/2 case with 1TRM Note: Only 1 LDCM. Only for A30 Available slots in 3/4 &...
  • Page 96 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 Basic IED functions Self-supervision with internal event list Time and synchronization error Time synchronization Parameter setting groups Test mode functionality Change lock function IED Identifiers Product information...
  • Page 97 Two pcs can be 1MRK 512 001-BEN and 1MRK 001024-CA. used in applications for three winding Please refer to the website: www.abb.com/ transformers in single or multi-breaker substationautomation and ABB Product arrangement (ordering number RK926 215- Guide >...
  • Page 98 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 External resistor unit for high impedance differential protection High impedance resistor unit 1-ph with resistor 1.8 kOhms and Quantity: RK795101-MA voltage dependent resistor for 20-100V operating voltage High impedance resistor unit 3-ph with resistor 1.8 kOhms and...
  • Page 99 Transformer protection RET670 1MRK 504 091-BEN B Pre-configured Product version: 1.1 Issued: June 2010 User documentation Rule: Specify the number of printed manuals requested Quantity: 1MRK 504 087-UEN Operator’s manual ANSI Quantity: 1MRK 504 087-UUS Technical reference manual Quantity: 1MRK 504 086-UEN...
  • Page 100 IEC 61850 Data objects list for IED 670, ver. 1.1 1MRK 500 084-WEN Engineering guide IED 670 products 1MRK 511 179-UEN Communication set-up for RED 670 Differential protection and 670 series 1MRK 505 197-UEN More information can be found on www.abb.com/substationautomation.
  • Page 102 Contact us ABB AB Substation Automation Products SE-721 59 Västerås, Sweden Phone +46 (0) 21 32 50 00 +46 (0) 21 14 69 18 www.abb.com/substationautomation...