Page 1 SERVICE MANUAL RG-3 CHASSIS MODEL COMMANDER DEST. CHASSIS NO. MODEL COMMANDER DEST. CHASSIS NO. KP-ES43HK1 KP-ES53HK1 RM-961 SCC-P45B-A RM-961 SCC-P45C-A KP-ES43ME1 KP-ES53ME1 RM-961 SCC-P46B-A RM-961 SCC-P46C-A KP-ES43MN1 KP-ES53MN1 RM-961 SCC-P44D-A RM-961 SCC-P44B-A KP-ES43SN1 KP-ES53SN1 RM-961 SCC-P47B-A RM-961 SCC-P47C-A KP-ES48HK1 KP-ES61HK1...
Page 2 966 × 1078 × 532 Dimensions (w/h/d, mm) Mass (kg) Power requirements 110 V – 240 V (For KP-ES61MN1/KP-ES53MN1/KP-ES48MN1/KP-ES43MN1/ KP-ES61ME1/KP-ES53ME1/KP-ES48ME1/KP-ES43ME1) 220 V – 240 V (For KP-ES61HK1/KP-ES53HK1/KP-ES48HK1/KP-ES43HK1/ KP-ES61SN1/KP-ES53SN1/KP-ES48SN1/KP-ES43SN1) Power consumption (W) 270 W (For KP-ES61MN1/KP-ES53MN1/KP-ES48MN1/KP-ES43MN1/ KP-ES61ME1/KP-ES53ME1/KP-ES48ME1/KP-ES43ME1) 255 W (For KP-ES61HK1/KP-ES53HK1/KP-ES48HK1/KP-ES43HK1/ KP-ES61SN1/KP-ES53SN1/KP-ES48SN1/KP-ES43SN1) Design and specifications are subject to change without notice.
Page 3: Table Of Contents
KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 TABLE OF CONTENTS Section Title Page Section Title Page 1. SELF DIAGNOSIS FUNCTION 6. ELECTRICAL ADJUSTMENTS 1-1. Diagnostic Test Indicators ......... 6-1. Adjustments with Commander 1-2. Display of STANDBY/TIMER 6-1-1. How to Select Each Mode ......Light Flash Count ..........
Page 4: Table Of Contents
KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 Section Title Page 7. DIAGRAMS 7-1. Block Diagrams ..........7-2. Frame Schematic Diagram (1) (KP-ES43) ..103 Frame Schematic Diagram (2) (KP-ES48/53/61) ..........106 7-3. Circuit Boards Location ........109 7-4. Schematic Diagrams and Printed Wiring Boards ..............
Page 5: Self Diagnosis Function
KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 SECTION 1 SELF DIAGNOSIS FUNCTION The unit in this manual contain a self-diagnostic function. If an error occurs, the STANDBY/TIMER lamp will automatically begin to flash. The number of times the lamp flashes translates to a probable source of the problem. A definition of the STANDBY/TIMER lamp flash indicators is listed in the instruction manual for the user's knowledge and reference.
Page 6: Light Flash Count
KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 1-2. DISPLAY OF STANDBY/TIMER LIGHT FLASH COUNT 2 times 3 times Lamp ON 0.3 sec. Lamp OFF 3 sec. Lamp OFF 0.3 sec. 4 times 5 times 6 times 7 times STANDBY/TIMER lamp Diagnostic Item...
Page 7: Handling Of Self-Diagnostic Screen Display
KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 1-4. SELF-DIAGNOSTIC SCREEN DISPLAY For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it is possible to bring up past occurrences of failure for confirmation on the screen: [To Bring Up Screen Test] In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below: ON SCREEN...
Page 8: 1-6. Self-Diagnostic Circuit
KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 1-6. SELF-DIAGNOSTIC CIRCUIT From Q1203 (A1 board) To H1 board From G,G1 board IC002 IC4301 IC004 SYSTEM Y/C JUNGLE MEMORY From CRT (IK) 25 IKIN 3 OCP LED1 54 From IC5201 20 XRAY 6 OVP...
Page 9 Using Your New Projection TV – 9 –...
Page 10 Using Your New Projection TV – 10 –...
Page 11 Using Your New Projection TV – 11 –...
Page 12 Using Your New Projection TV – 12 –...
Page 13 Using Your New Projection TV – 13 –...
Page 14 Using Your New Projection TV – 14 –...
Page 15 – 15 –...
Page 16 – 16 –...
Page 17 – 17 –...
Page 18 – 18 –...
Page 19 – 19 –...
Page 20 – 20 –...
Page 21 – 21 –...
Page 22 – 22 –...
Page 23 – 23 –...
Page 24 – 24 –...
Page 25 – 25 –...
Page 26 – 26 –...
Page 27 – 27 –...
Page 28 – 28 –...
Page 29 – 29 –...
Page 30 – 30 –...
Page 31 – 31 –...
Page 32 – 32 –...
Page 33 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 SECTION 3 DISASSEMBLY 3-1. REAR BOARD REMOVAL • KP-ES43 • KP-ES53 2 Rear board 2 Rear board 1 Eight screws (Hexagon head) 1 Thirteen screws (Hexagon head) • KP-ES48 • KP-ES61 2 Rear board 2 Rear board 1 Thirteen screws (Hexagon head)
Page 34: Service Position
KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 3-2. MAIN BRACKET BLOCK 3-3. SERVICE POSITION REMOVAL • KP-ES43/ES48/ES53/ES61 • KP-ES43 2 Net work 4 Woofer block assembly 3 Four screws (4 x 16) 1 Two screws (Hexagon head) 1 Open the printed circuit board holder.
Page 35 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 3-4. CONTROL PANEL BLOCK AND RESISTOR ASSEMBLY (FOCUS PACK) REMOVAL • KP-ES43 7 Control panel block 6 Three screws (Hexagon head) 5 Front cover (L) 4 Four screws (Hexagon head) 9 Resistor assembly (Focus pack) 8 Screw (+BVTP 4 x 16) 1 Speaker grille...
Page 36: Beznet Block Removal
KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 3-5. BEZNET BLOCK REMOVAL 1 Eleven screws • KP-ES43 (+BVTP 4 x 16) 3 Mirror cover block 5 Beznet block 2 Four screws (Hexagon head) 4 Four screws (Hexagon head) • KP-ES48/ES53/ES61 1 Ten screws (KP-ES48)
Page 37: Chassis Block Removal
KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 3-6. CHASSIS BLOCK REMOVAL (1) MAIN BRACKET REMOVAL • KP-ES43/ES48/ES53/ES61 1 Two screws (Hexagon head) 3 Set the main bracket. 2 Pull the main bracket, and remove each connectors on main bracket. Pay particular attention to the wires of each Printed circuit boards when puling out the main bracket.
Page 38: Terminal Board Removal
KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 3-7. TERMINAL BOARD REMOVAL 3 RF cable 4 Terminal board 1 Five screws (+BVTP 3 x 12) 2 Two screws (+BVTP 4 x 16) 3-8. BD, DS, D BOARDS REMOVAL 2 BD holder 1 Screw...
Page 39: G, G1 Board Removal
KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 3-9. G, G1 BOARD REMOVAL 1 Four claws 2 G board (KP-ES43HK1/SN1, ES48HK1/SN1, ES53HK1/SN1, ES61HK1/SN1) G1 Board (KP-ES43ME1/MN1, ES48ME1/MN1, ES53ME1/MN1, ES61ME1/MN1) 3-10. J1, B3, E, M1 BOARDS REMOVAL 6 E board 7 Four screws...
Page 40: A1 Board Removal
KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 3-11. A1 BOARD REMOVAL 1 Screw (+BVTP 3 x 12) 3 A1 board 2 Two claws 3-12. HIGH-VOLTAGE 3-13. PICTURE TUBE REMOVAL CABLE REMOVAL AND INSTALLATION Removing the arrow-marked screw is strictly inhibited. (1) Removal...
Page 41: Screen (G2) Adjustment
KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 SECTION 4 SET-UP ADJUSTMENTS 4-1. SCREEN VOLTAGE ADJUSTMENT 5. Rotate the green lens and align to obtain the best lens focus at the center area. (ROUGH ALIGNMENT) 6. Rotate the green focus VR on the focus pack and align to 1.
Page 42: Pole Magnet Adjustment
KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 4-5. 2-POLE MAGNET ADJUSTMENT 4-7. GREEN, RED AND BLUE FOCUS ADJUSTMENT 1. Receive the Dot signal. 2. Place the caps on the red and blue lens so that only the green 4-7-1. Green, Red and Blue Lens Focus Adjustment color is shown.
Page 43: Hv Hold-Down Adjustment
KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 SECTION 5 SAFETY RELATED ADJUSTMENT When replacing the following components marked with ] on D BOARD – CONDUCTOR SIDE – the schematic diagram, always check hold-down voltage and CN5003 if necessary re-adjust. Part Replaced ([) CN5002 R9901 Part Replaced (])
Page 44: Electrical Adjustments
KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 SECTION 6 ELECTRICAL ADJUSTMENTS 6-1-1. How to Select Each Mode 6-1. ADJUSTMENTS WITH COMMANDER The adjustment requires the following modes: Service adjustment to this model can performed with the sup- plied remote commander RM-961 50 Hz...
Page 45 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 6-1-2. How to Enter Service Mode 6-1-5. How to Write the Data 1. Turn on the main power switch to place this set in standby 1. Set in the service mode. mode. (LED will light in red.) 2.
Page 46: Service List
KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 6-2. SERVICE LIST Note • Common : The data value of each mode commonness. Others are set up by each mode. • : Shaded items are fixed data. • : Though data value is indicated on the screen, it is not used.
Page 47: Es53Hk1/Me1/Mn1/Sn1, Es61Hk1/Me1/Mn1/Sn1K Rm
KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 – 47 –...
Page 48 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 – 48 –...
Page 49 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 – 49 –...
Page 50 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 – 50 –...
Page 51 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 – 51 –...
Page 52 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 – 52 –...
Page 53 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 – 53 –...
Page 54 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 – 54 –...
Page 55 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 – 55 –...
Page 56 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 – 56 –...
Page 57 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 – 57 –...
Page 58 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 Category : PJE : Fixed data Standard Data Item Adjustment Data Name/Description Number Item Range DRC1250 DRC100 DRC1250 DRC100 DRC1250 (PAL) (PAL) (NTSC) (NTSC) VC (NTSC) FDIS 00,01 SELECT REGI DATA DISPLAY OF FINE ADJ...
Page 59 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 – 59 –...
Page 60: Picture Quality Adjustment
KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 6-3-2. NTSC Video Input 6-3. Picture Quality Adjustment 6-3-1. Preparation 1. Enter the NTSC video color bar (White & color 75%) signal. 2. Enter the service mode, and set respective items as follows. 1. Set in the service mode.
Page 61 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 6-3-3. NTSC RF Input 6-3-4. PAL Video Input 1. Enter the NTSC RF color bar (White & color 75%) signal. 1. Enter the PAL video color bar (White & color 75%) signal. 2. Adjust with the same manner as 6-3-2. NTSC Video Input. 2.
Page 62 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 6-3-5. PAL RF Input 6-4. Color Offset (53, 61 inch model only) 6-4-1. 50 Hz (PAL) TV Mode 1. Enter the PAL RF color bar (White & color 75%) signal. 2. Adjust with the same manner as 6-3-2. NTSC Video Input.
Page 63: Registration Adjustment
KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 6-5. REGISTRATION ADJUSTMENT 6-5-2. Method of Main Deflection Adjustment 1. Place the caps on the red and blue lenses so that only the It is adjusted by REGISTRATION ADJUSTMENT respec- green color is displayed. tively in the following 5 modes.
Page 64 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 6-5-3. Operation Method for Projector Engine Commander Function (PJE mode) (PJE) Mode Button Mode Description WRITE Writes data to NVM. 7 + - READ Reads data from NVM. 5 + - Service data initialization. Not stored.
Page 65 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 3. Operation Method for Fine Adjustment 6-5-4. Method of Projector Engine Adjustment (in GRN, BLU, or RED Mode) (Sub Deflection Adjustment) 1) Set in the Service mode, and select the category “PJE”. a : Yes Adjustment –...
Page 66 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 2. Blue Adjustment 6) Select “GRN SKEW”, and correct the tilt of horizontal lines 1) Place a cap on the red lens so that green and blue colors are and vertical lines. displayed. • GRN SKEW (horizontally/vertically) 2) Press “3”...
Page 67 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 6-5-5. Deflection Adjustment 2. DRC100 50 Hz (PAL) Mode 1. DRC1250 50 Hz (PAL) Mode 1) Enter the PAL SPCB signal, and set the DRC100. 1) Enter the PAL SPCB signal, and set the DRC1250. 2) Set in the service mode, and write the following data to 2) Set in the service mode, and write the following data to NVM.
Page 68 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 3. PIP 50 Hz (PAL) Mode 4. TWIN 50 Hz (PAL) Mode 1) Enter the PAL SPCB signal, and set in the service mode. 1) Enter the PAL SPCB signal, and set in the service mode.
Page 69 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 5. INDEX 50 Hz (PAL) Mode 6. DRC1250 60 Hz (NTSC) Mode 1) Enter the PAL SPCB signal, and set in the service mode. 1) Enter the NTSC monoscope signal, and set the DRC1250. 2) Press “PROGR INDEX”...
Page 70 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 7. DRC100 60 Hz (NTSC) Mode 8. PIP 60 Hz (NTSC) Mode 1) Enter the NTSC monoscope signal, and set the DRC100. 1) Enter the NTSC monoscope signal, and set in the service 2) Set in the service mode, and write the following data to mode.
Page 71 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 9. TWIN 60 Hz (NTSC) Mode 10.INDEX 60 Hz (NTSC) Mode 1) Enter the NTSC monoscope signal, and set in the service 1) Enter the NTSC monoscope signal, and set in the service mode. mode.
Page 72 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 11.DRC1250 WIDE 60 Hz (NTSC) Mode 12.PIP WIDE 60 Hz (NTSC) Mode 1) Enter the NTSC monoscope signal and set the DRC1250. 1) Enter the NTSC monoscope signal and set in the service 2) Press “MENU” button on the commander and move “...
Page 73: Auto Convergence Setting
KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 6-6. AUTO CONVERGENCE SETTING 6-7. WHITE BALANCE ADJUSTMENT This adjustment must be performed after the registration adjust- 1. Enter the monoscope signal. ment was made or after readjustment was made by any reason. 2. Set in the service mode. 3.
Page 74: Auto Convergence Error Code List
KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 6-8. AUTO CONVERGENCE ERROR CODE LIST If an error code is displayed after the set has been fully adjusted, correctly, plese check the following items : position, tilt and sizing. If either of these adjustments are off, even slightli, the auto registration pattern will not hit the four sensors properly. This occurs when the internal generator patterns is being flashed on the screen for the sensor to read.
Page 100 MPY2 MPY1 MPY2 MPY1...
Page 111: Screen And Cover Block (Kp-Es43)
KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 SECTION 8 EXPLODED VIEWS • Items marked " * " are not stocked since NOTE: The components identified by shading they are seldom required for routine • Items with no part number and no ¡...
Page 112: Control Panel And Cabinet Block (Kp-Es43)
KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 8-2. CONTROL PANEL AND CABINET BLOCK (KP-ES43) The components identified by shading : 7-685-648-79 +BVTP 3X12 ¡ and mark are critical for safety. : 7-685-663-79 +BVTP 4X16 Replace only with part number specified. PICTURE TUBE BLOCK...
Page 113: Screen And Cover Block (Kp-Es48)
KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 8-3. SCREEN AND COVER BLOCK (KP-ES48) : 7-685-663-79 +BVTP 4X16 104 105 CONTROL PANEL BLOCK CABINET BLOCK REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK X-4037-794-1 BEZNET (48) ASSY * 4-075-234-01 HOLDER (TOP), MIRROR 4-378-522-31 SCREW, TAPPING, HEXAGON HEAD * 4-076-705-01 HOLDER (SL), MIRROR 4-064-041-11 SCREEN (48), CONTRAST...
Page 114: Control Panel And Cabinet Block (Kp-Es48)
KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 8-4. CONTROL PANEL AND CABINET BLOCK (KP-ES48) The components identified by shading ¡ : 7-685-534-19 +BTP 2.6X8 and mark are critical for safety. Replace only with part number specified. : 7-685-648-79 +BTP 3X12 : 7-685-663-71...
Page 115: Screen And Cover Block (Kp-Es53)
KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 8-5. SCREEN AND COVER BLOCK (KP-ES53) : 7-685-661-79 +BVTP 4X12 : 7-685-663-79 +BVTP 4X16 CABINET BLOCK CONTROL PANEL BLOCK REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK X-4037-799-1 BEZNET (53) ASSY * 4-075-234-01 HOLDER (TOP), MIRROR 4-378-522-31 SCREW, TAPPING, HEXAGON HEAD * 4-069-687-01 HOLDER (LS), MIRROR 4-064-186-11 SCREEN (53), CONTRAST...
Page 116: Control Panel And Cabinet Block (Kp-Es53)
KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 8-6. CONTROL PANEL AND CABINET BLOCK (KP-ES53) The components identified by shading ¡ : 7-685-534-19 +BTP 2.6X8 and mark are critical for safety. Replace only with part number specified. : 7-685-648-79 +BTP 3X12 : 7-685-663-71...
Page 117: Screen And Cover Block (Kp-Es61)
KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 8-7. SCREEN AND COVER BLOCK (KP-ES61) : 7-685-661-79 +BVTP 4X12 : 7-685-663-79 +BVTP 4X16 CABINET BLOCK CONTROL PANEL BLOCK REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK X-4037-791-1 BEZNET (61) ASSY * 4-070-345-01 HOLDER (TOP), MIRROR 4-378-522-31 SCREW, TAPPING, HEXAGON HEAD * 4-069-689-01 HOLDER (L), MIRROR 4-071-950-11 SCREEN (61), CONTRAST...
Page 118: Control Panel And Cabinet Block (Kp-Es61)
KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 8-8. CONTROL PANEL AND CABINET BLOCK (KP-ES61) The components identified by shading ¡ : 7-685-534-19 +BTP 2.6X8 and mark are critical for safety. Replace only with part number specified. : 7-685-648-79 +BVTP 3X12 : 7-685-663-71...
Page 119: Main Bracket Block
KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 8-9. MAIN BRACKET BLOCK The components identified by shading ¡ : 7-685-648-79 +BVTP 3X12 and mark are critical for safety. Replace only with part number specified. : 7-685-663-79 +BVTP 4X16 REF.NO. PART NO. DESCRIPTION REMARK REF.NO.
Page 120: Picture Tube Block
KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 8-10. PICTURE TUBE BLOCK The components identified by shading ¡ and mark are critical for safety. : 7-685-663-71 +BVTP 4X16 Replace only with part number specified. KP-ES43 EXCEPT KP-ES43 REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO.
Page 121: Electrical Parts List
KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K ¡ RM-961 and mark are critical for safety. Replace only with part number specified. SECTION 9 REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK ELECTRICAL PARTS LIST The components identified by [ in this NOTE: •...
Page 122 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 ¡ and mark are critical for safety. Replace only with part number specified. H1 H2 REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK <TRANSISTOR> <TRANSISTOR> Q3101 8-729-120-28 TRANSISTOR 2SC1623-L5L6...
Page 123 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K ¡ RM-961 and mark are critical for safety. Replace only with part number specified. H2 H3 ZR REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK <COIL> <RESISTOR> L3201 1-414-189-31 INDUCTOR 100µH R3301...
Page 124 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 ¡ and mark are critical for safety. Replace only with part number specified. ZR ZG REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK Q7403 8-729-120-28 TRANSISTOR 2SC1623-L5L6 C7606 1-104-989-91 MYLAR 0.0022µF 10% 200V...
Page 125 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K ¡ RM-961 and mark are critical for safety. Replace only with part number specified. ZG ZB REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK <RESISTOR> C7815 1-107-645-11 ELECT 22µF 20% 200V R7601...
Page 126 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 ¡ and mark are critical for safety. Replace only with part number specified. ZB CR REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R7816 1-249-414-11 CARBON 1/4W <IC>...
Page 127 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K ¡ RM-961 and mark are critical for safety. Replace only with part number specified. CR CG REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R7133 1-208-834-11 METAL CHIP 150K 0.5% 1/10W <JACK>...
Page 128 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 ¡ and mark are critical for safety. Replace only with part number specified. CG CB REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK <TEST PIN> <COIL> TP7202 * 1-535-881-21 TERMINAL, TP (AUTO INSERTION)
Page 129 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K ¡ RM-961 and mark are critical for safety. Replace only with part number specified. CB B3 REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK <SPARK GAP> C505 1-124-779-00 ELECT CHIP 10µF 20% 16V C507...
Page 130 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 ¡ and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK C616 1-126-396-11 ELECT CHIP 47µF 20% 16V C835 1-163-038-91 CERAMIC CHIP 0.1µF...
Page 131 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K ¡ RM-961 and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK FL501 1-233-877-11 FILTER, LOW PASS <COIL> FL502 1-233-504-21 FILTER, LOW PASS L302...
Page 132 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 ¡ and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R311 1-216-009-91 RES-CHIP 1/10W R551 1-208-756-11 METAL CHIP 0.5% 1/10W...
Page 133 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K ¡ RM-961 and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R639 1-216-017-91 RES-CHIP 1/10W R814 1-216-073-00 RES-CHIP 1/10W R640 1-216-009-91 RES-CHIP...
Page 134 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 ¡ and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R884 1-216-009-91 RES-CHIP 1/10W R958 1-216-635-11 METAL CHIP 0.5% 1/10W...
Page 135 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K ¡ RM-961 and mark are critical for safety. Replace only with part number specified. B3 A1 REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK RB017 1-239-621-11 NETWORK RESISTOR (CHIP) 22 C1204 1-115-419-11 CERAMIC CHIP 3300pF RB018...
Page 136 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 ¡ and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK C1611 1-126-916-11 ELECT 1000µF 20% 6.3V D1406...
Page 137 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K ¡ RM-961 and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK JR1603 1-216-295-91 SHORT R1112 1-216-295-91 SHORT JR1604 1-414-193-41 INDUCTOR 220µH...
Page 138 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 ¡ and mark are critical for safety. Replace only with part number specified. A1 M1 REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R1332 1-216-043-91 RES-CHIP 1/10W * A-1306-588-A M1 BOARD, COMPLETE...
Page 139 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K ¡ RM-961 and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK <CONNECTOR> L006 1-408-603-31 INDUCTOR 10µH CN001 1-695-302-11 CONNECTOR, BOARD TO BOARD 50P <TRANSISTOR>...
Page 140 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 ¡ and mark are critical for safety. Replace only with part number specified. M1 E REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R047 1-216-065-91 RES-CHIP 4.7K 1/10W...
Page 141 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K ¡ RM-961 and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK C4338 1-164-004-11 CERAMIC CHIP 0.1µF 10% 25V <IC>...
Page 142 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 ¡ and mark are critical for safety. Replace only with part number specified. E J1 REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R4321 1-216-105-91 RES-CHIP 220K 1/10W...
Page 143 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K ¡ RM-961 and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK C8326 1-107-823-11 CERAMIC CHIP 0.47µF 10% 16V C8402 1-164-346-11 CERAMIC CHIP 1µF C8327...
Page 144 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 ¡ and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK C8807 1-163-037-11 CERAMIC CHIP 0.022µF 10% 50V D8324 8-719-056-85 DIODE UDZ-TE-17-8.2B...
Page 145 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K ¡ RM-961 and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK L8102 1-402-711-11 INDUCTOR 0µH Q8426 8-729-120-28 TRANSISTOR 2SC1623-L5L6 L8304 1-412-029-11 INDUCTOR CHIP 10µH Q8601...
Page 146 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 ¡ and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R8336 1-216-065-91 RES-CHIP 4.7K 1/10W R8398 1-216-025-91 RES-CHIP...
Page 147 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K ¡ RM-961 and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R8469 1-216-049-91 RES-CHIP 1/10W R8572 1-216-049-91 RES-CHIP 1/10W R8470 1-216-069-00 RES-CHIP...
Page 148 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 ¡ and mark are critical for safety. Replace only with part number specified. J1 BD REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R8806 1-216-041-00 RES-CHIP 1/10W * A-1136-088-A BD BOARD, COMPLETE...
Page 149 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K ¡ RM-961 and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK C2667 1-164-690-91 CERAMIC CHIP 0.0022µF 5% C2742 1-163-231-11 CERAMIC CHIP 15pF C2668...
Page 150 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 ¡ and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK D2608 8-719-976-99 DIODE DTZ5.1B <CHIP CONDUCTOR> D2609...
Page 151 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K ¡ RM-961 and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK L2670 1-216-295-91 SHORT R2650 1-216-025-91 RES-CHIP 1/10W R2651 1-216-025-91 RES-CHIP...
Page 152 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 ¡ and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R2717 1-208-799-11 METAL CHIP 5.1K 0.5% 1/10W...
Page 153 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K ¡ RM-961 and mark are critical for safety. Replace only with part number specified. BD DS D REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R2873 1-216-049-91 RES-CHIP 1/10W R3502 1-216-093-91 RES-CHIP...
Page 154 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 ¡ and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK C5118 1-137-391-11 MYLAR 0.0047µF 5% 100V C5224 1-126-967-11 ELECT 47µF...
Page 155 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K ¡ RM-961 and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK C5711 1-136-165-00 MYLAR 0.1µF D5202 8-719-109-85 DIODE RD5.1ESB2 D5203 8-719-923-86 DIODE MTZJ-T-77-15 C5712...
Page 156 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 ¡ and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK L5108 1-412-533-21 INDUCTOR 47µH <RESISTOR> L5109 1-412-519-11 INDUCTOR 3.3µH...
Page 157 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K ¡ RM-961 and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R5211 1-216-081-00 RES-CHIP 1/10W R5340 1-249-377-11 CARBON 0.47 1/4W R5212...
Page 158 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 ¡ and mark are critical for safety. • The components identified by [ in this manual have been carefully Replace only with part number specified. D G1, G factory-selected for each set in order to satisfy regulations regarding X-ray radiation.
Page 159 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K ¡ RM-961 and mark are critical for safety. Replace only with part number specified. G1, G REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK C6016 1-163-251-11 CERAMIC CHIP 100pF C6101 1-107-679-91 ELECT 10µF...
Page 160 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 ¡ and mark are critical for safety. Replace only with part number specified. G1, G REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK C6340 1-164-004-11 CERAMIC CHIP 0.1µF...
Page 161 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K ¡ RM-961 and mark are critical for safety. Replace only with part number specified. G1, G REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK IC6003 ! 8-749-924-35 PHOTO COUPLER ON3171-R D6302 8-719-312-47 DIODE RBA-406B D6303...
Page 162 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 ¡ and mark are critical for safety. Replace only with part number specified. G1, G REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK Q6300 8-729-120-28 TRANSISTOR 2SC1623-L5L6 R6016...
Page 163 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K ¡ RM-961 and mark are critical for safety. Replace only with part number specified. G1, G REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R6044 1-216-073-00 RES-CHIP 1/10W R6078 1-216-073-00 RES-CHIP 1/10W...
Page 164 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 ¡ and mark are critical for safety. Replace only with part number specified. G1, G REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R6329 1-208-807-11 METAL CHIP 0.5% 1/10W <THERMISTOR>...
Page 165 KP- ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K ¡ RM-961 and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK ACCESSORIES AND PACKING MATERIALS ***************************************************** ! 1-569-008-11 ADAPTOR, CONVERSION 2P (ES43ME1/MN1, ES48ME1/MN1, ES53ME1/MN1, ES61ME1/MN1) * 4-029-168-01 BAG, PROTECTION (ES43)
Page 166 KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1, The components identified by shading ES53HK1/ME1/MN1/SN1, ES61HK1/ME1/MN1/SN1K RM-961 ¡ and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK English Sony Corporation 2000FA05201-1 Printed in Japan...

This manual is also suitable for:

Kp-es43me1 Kp-es48mn1 Kp-es48sn1 Kp-es43mn1 Kp-es53hk1 Kp-es53me1 ... Show all

Sony KP-ES43HK1 Service Manual

1 Self Diagnosis Function

2 General

3 Disassembly

4 Set-Up Adjustments

5 Safety Related Adjustment

6 Electrical Adjustments

8 Exploded Views

9 Electrical Parts List

Quick Links

Related Manuals for Sony KP-ES43HK1

Summary of Contents for Sony KP-ES43HK1

This manual is also suitable for:

Table of Contents