Page 2
VIEWS AND IN THE PARTS LIST ARE CRITICAL TO REMOVING THE ANODE. SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS AP- PEAR AS SHOWN IN THIS MANUAL OR IN SUPPLE- MENTS PUBLISHED BY SONY. – 2 –...
SECTION 1 The operating instructions mentioned here are partial abstracts from the Operating Instruction Manual. The page numbers of GENERAL the Operating Instruction Manual remain as in the manual. Getting Started Front of TV Connections Camcorder (S video input) to S video output L(MONO) …...
Connecting a DVD player Installing the DVD player Rear of TV projection TV LINE OUT R-AUDIO-L VIDEO … 1, 2, or 3 (video input) (MONO) For the best picture quality, install the projection TV to audio/ (yellow) video within the areas shown below. -L (MONO)(white) outputs -R (red)
Page 6
Optimum viewing area (Vertical) Getting to know the KP-EF41 KP-EF48 remote commander min 1.8m (6 ft.) min 1.5m (5 ft.) Names/symbols of buttons on the remote commander are indicated in different colors to represent the available 27° 27° functions. 27° 27°...
Press V or v to move the cursor (z) to the Introducing the Changing the menu PRESET menu ( ), and press ENTER. menu system language PRES E T L A NGUAGE / ENGL I SH ENTER ENTER AUTO PROGRAM MANUA L PROGRAM T V S Y S : B / G COL SYS : AUTO...
Page 8
• If you do not know your local TV system, consult your nearest L ANGUAGE / ENGL I SH ENTER ENTER Sony dealer or authorized service center. AUTO PROGRAM MANUA L PROGRAM AUTO PROGRAM T V SYS : B / G...
Press V or v to move the cursor (z) to Disabling program positions Presetting the volume level for Adjusting the CONVERGENCE and press ENTER. individual programs The CONVERGENCE adjustment screen appears. convergence By disabling unused or unwanted program positions, you can skip those positions when you press PROGR If the volume of the selected program is louder than +/–.
Page 10
Operations To scan through program positions Watching the TV Watching the video input Displaying the on-screen information Press PROGR +/– on the remote commander or the TV until the program position you want appears. Press … on the remote commander or … on Press the TV.
If the picture is slightly snowy Press V/b/v/B to adjust the selected item, Adjusting the Adjusting the picture settings You may try to improve the picture by changing the and press ENTER. (VIDEO ADJUST) VM setting as described below: picture and sound For details on each item, see “Description of adjustable You can adjust the picture settings to suit your taste Display the VIDEO ADJUST menu.
Page 12
SRS (SOUND RETRIEVAL SYSTEM) is manufactured T R E B L E ENTER ENTER BA L ANCE by Sony Corporation under license from SRS Labs, Inc. It is SPEAKER: Press MENU. MAIN covered by U.S. Patent No. 4,748,669. The word “SRS” and the SRS symbol (r) are registered...
Page 13
Receiving area for NICAM and A2 (German) To restore the normal screen Selecting a stereo or Viewing multiple programs Press PROGR INDEX again or You can also select PROGR INDEX or PIP : OFF from System Receiving area bilingual program programs at the the PIP menu, and press ENTER to restore the normal NICAM...
Page 14
Displaying frame- Using the Picture-in- Changing the position of the PIP screen Swapping pictures between the main and PIP screens by-frame pictures Picture (PIP) MENU Press (STROBE) features ENTER Press MENU. You can watch a slow motion movement of the main With the Picture-in-Picture (PIP) feature, you can screen picture which is displayed frame-by-frame on display a sub screen within the main picture of...
Viewing Teletext Checking the contents of a Teletext Revealing concealed information service (INDEX) (REVEAL) Press to display an overview of the Teletext The REVEAL option lets you disclose concealed contents and page numbers. information, such as an answer to a quiz that you find on some of the Teletext pages.
To restore the normal picture and sound To display a Teletext page on the PIP screen Displaying Teletext Viewing a video modes using the menu Press ;, … , or PROGR +/–. on the PIP screen game screen MENU Notes (PIP TEXT) (GAME MODE) •...
Page 17
If the problem persists, contact your nearest Sony You can select the output signal from the Ú (monitor/ dealer or authorized service center. TV output) jacks at the rear of the TV. However, the / Press u.
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 2-6. G BOARD REMOVAL 2-7. P1 BOARD AND V2 BOARD REMOVAL 1 Three holder PWB 3 Two claws 1 Two claws 4 V2 board 2 P1 board 2 G Board 2-8. UG BOARD, AG BOARD AND S BOARD REMOVAL 7 Bracket (A) 0 AG board 8 Two claws...
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 (2) MAIN BRACKET REMOVAL * Pay particular attention to the wires of each PCB when puling out the main bracket. • KP-EF53 • KP-EF41 1 Two screws (Hexagon head) 1 Two screws 3 Set the main (Hexagon head) 3 Set the main bracket.
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 (3) CHASSIS BLOCK REMOVAL * Pull out the chassis block by gripping the handles as shown in the diagram. At this time, pay particular attention to the components removed in (1). • KP-EF53 • KP-EF41 2 Pull the chassis block.
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 SECTION 3 SET-UP ADJUSTMENTS 3-1. SCREEN VOLTAGE ADJUSTMENT KR, KG, KB (ROUGH ALIGNMENT) 5.6K/3W X3 1. Receive the Monoscope signal. 2. Set 50% BRIGHTNESS and minimum PICTURE. 3. Turn the red VR on the FOCUS Pack all the way to the left and then gradually turn it to the right until the point where you can see the retrace line.
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 [Change Blue Defocus] 3-5. 2-POLE MAGNET ADJUSTMENT 1. Set in service mode. 2. Set to receive the Dot signal. Lmm Max. 3. Place the caps on the red and blue lens so that only the green color is shown.
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 SECTION 4 SAFETY RELATED ADJUSTMENT When replacing the following components marked with] E BOARD – CONDUCTOR SIDE – on the schematic diagram, always check hold-down volt- CN810 age and if necessary re-adjust. CN505 Part Replaced ([) Part Replaced (]) E Board C515, C516, C554, D504, D507, Fig.
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 SECTION 5 CIRCUIT ADJUSTMENTS 5-1. ADJUSTMENTS WITH COMMANDER 1, 4 Select the adjustment item. Service adjustments are made with the RM-871 that comes with ↓ this unit. 3, 6 Raise/lower the data value. ↓ Entering service mode MUTING Writes.
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 Use the same method for Items Number 00-99. Use 1 and 4 5-2. ADJUSTMENT METHOD to select the adjustment item, use 3 and 6 to adjust, write with Item Number 00 MUTING , then execute the write with -. This explanation uses V-Position as an example.
Page 36
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 Adjustment Item Table Item Data Register Device Display Item Range Values Name 00~3F V POSITION CXA2050S 00~3F V SIZE 00~0F H POSITION 00~3F H SIZE 00~0F S CORRECTION 00~0F V LINEARITY 00~3F PIN COMP 00~0F PIN PHASE 00~0F UP CORNER PIN...
Page 37
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 Item Data Register Device Display Item Range Values Name –127~+127 KEYSTONE SSKW –127~+127 SUB SKEW RH10 MPIN –127~+127 MID PINCUSION RH11 –127~+127 –10 PINCUSION RH12 SBOW –127~+127 SUB BOW RH13 MBOW –127~+127 MID BOW RH14 4PIN –127~+127 4th PINCUSION...
Page 38
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 Item Data Register Device Display Item Range Values Name ACV2 ATIM 0-255 SAMPLE START TIME (LSR) ACV3 ATIB 0-255 SAMPLE START TIME (BOT) ACV4 AH51 0-255 OSD H POS 50 (L & R) ACV5 AH52 0-255 OSD H POS 50 (UP &...
Page 39
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 Item Data Register Device Display Item Range Values Name 00~01 DYNAMIC COLOR 00~03 GAMMA 00~01 DC-TRANSIENT 00~07 DELAY CTRL(PAL) 00~07 DELAY CTRL(NTSC) 00~07 DELAY CTRL(SECAM) 00~07 DELAY AT DVD(50Hz) 00~07 DELAY AT DVD(60Hz) 00~0F SUB-CONTRAST 00~0F SUB-COLOR(OTHER) 00~0F...
Page 40
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 Item Data Register Device Display Item Range Values Name 00~3F CORING 00~3F DSC OFFSET 00~3F DSC GAIN 00~01 DELAY TIME 00~0F SEL PIN DELAY SDA9189X 00~FF H POSITION(MSB 8bit) 00~FF V POSITION 00~1F HSI DELAY 00~01 DECIMATION FILTER 00~1F...
Page 41
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 Item Data Register Device Display Item Range Values Name 00~07 USER SET UP 00~01 D/K STEREO SEARCH 00~01 NO SYNC MUTE 00~01 DISABLE DEGAUSS 00~01 DISABLE WIDEZOOM 00~01 BASS CENTER SHIFT 00~01 BASS VOLUME SHIFT 00~03 WOOFER OFF BASS SHIFT 00~FF...
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 MAIN DEFLECTION ADJUSTMENT 5-4. REGISTRATION (CONVERGENCE) 1) Adjust VSP V-Lin. ADJUSTMENT METHOD Correct linearity of the horizontal top and bottom lines. PAL REGISTRATION ADJUSTMENT VSP VLINE 1) Receive the PAL SPCB signal. 2) Select Service mode and enter adjustment items for Green signal.
Page 43
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 SUB DEFLECTION ADJUSTMENT ITEM VERTICAL LINE ADJUSTMENT Adjustment O : Yes – : No 1. Carefully watching out for the GH CENT screen centre section, adjust GH CENT, GH BOW, GH SKEW. Adjustment type 2. GH 4th Bow adjustment. Correct the corner distortion which Display Adjustment item GH GV RH RV BH BV...
Page 44
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 HORIZONTAL LINE ADJUSTMENT HORIZONTAL SIZE ADJUSTMENT 1. Finely adjust the centre position of the vertical line at the 1. Adjust with GH MSIZE, so that the sizes of both edges centre of the screen with GV CENT. and centre are equal.
Page 45
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 GREEN VERTICAL SIZE ADJUSTMENT GREEN HORIZONTAL QUATERNARY ADJUSTMENT 1. Adjust GV MSIZE so that the sizes at the top and bottom 1. Adjust GH 4PIN, to correct the 4th order distortion. and centre are equal. 2.
Page 46
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 GREEN HORIZONTAL SYMMETRICAL PIN GREEN VERTICAL 4TH ORDER DISTORTION DISTORTION ADJUSTMENT ADJUSTMENT 1. Adjust GH MPIN to correct pin distorton at both edges of 1. By using GV 4 PIN, 4th-Order distortion of the horizontal the centre section.
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 GREEN VERTICAL ASYMMETRICAL PIN DISTORTION GREEN AND BLUE ADJUSTMENT (2ND-ORDER DISTORTION) ADJUSTMENT 1. Adjust so that the blue and green lines are on top of each 1. Correct the asymmetrical pin distortion at the top and bot- other.
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 5-6. WHITE BALANCE ADJUSTMENT SUB HUE ADJUSTMENT (SH1, SH2) 1. Receive the monoscope signal and adjust the picture qual- 1. Input a PAL color-bar. ity with the menu. 2. Set the following condition: 2. Adjust service mode S-BRIGHT so that the signal 10 IRE PICTURE 90%, BRIGHTNESS 50%, COLOR 50%.
Page 51
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 RM-871 CN3501 TEXT SEL (TEXT) GREEN TO P1 BOARD BLUE IC3501 CN2401 TEXT GENERATOR CN3502 R BUFF R OUT Q3507 X IN X3501 G BUFF G OUT GREEN 12MHz Q3509 X OUT (DVD IN) B BUFF B OUT...
Page 52
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 RM-871 (RED AMP) (GREEN AMP) (BLUE AMP) RED AMP V901 V902 V903 Q704,703 GREEN AMP BLUE AMP PICTURE TUBE PICTURE TUBE PICTURE TUBE Q733,732 Q762,763 Q701 HV R HV G HV B CN703 CN706 CN736...
6-2. FRAME SCHEMATIC DIAGRAM R-Y OUT SDAT SDAT B-Y OUT (SURROUND) SCLK SCLK S-SYS1 CN2401 CN2801 Y OUT CN2902 CN2004 CN403 CN407 CN1002 CN3501 S-SYS2 WHT-L :S-MICRO :S-MICRO :S-MICRO :S-MICRO :S-MICRO :S-MICRO :S-MICRO R-Y IN :S-MICRO L IN L IN B-Y IN DVD-Y CN2301...
(cr) (cg) (cb) (3) Schematic Diagrams of AG (3/3), CB, CG and CR Boards RED AMP GREEN AMP BLUE AMP • AG (2/3) BOARD IC401 MC141627FT — CR BOARD — — CG BOARD — — CB BOARD — PORT PORT APCF-II PROCESSING Adaptive...
(4) Schematic Diagram of E Board • E BOARD MARK LIST • E BOARD VOLTAGE LIST Ref. Pin No. Voltage [V] Ref. Pin No. Voltage [V] Ref. Pin No. Voltage [V] Ref. Pin No. Voltage [V] Ref. Pin No. Voltage [V] IC501 –0.4 –0.8...
Page 61
(5) Schematic Diagram of D Board VAR OUT CN1807 CN1808 CN1601 CENTER SP IN / SURROUND OUT :S-MICRO :S-MICRO :S-MICRO J1601 TO H2 BOARD CN3204 TB1601 HP AUDIO R Q1612 DTC143TKA C1601 MUTE 0.001 L1601 L1602 B:CHIP 0µH 0µH C1602 R1601 0.001 R1830...
(6) Schematic Diagrams of P1 and V2 Boards • V2 BOARD WAVEFORMS • P1 BOARD IC2406 BA7606F • P1 BOARD WAVEFORMS • P1 BOARD VOLTAGE LIST PAL/SECAM NTSC PAL/SECAM NTSC PAL/SECAM Ref. Pin No. Voltage [V] Ref. Pin No. Voltage [V] Ref.
Page 63
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 RM-871 (p1) (v2) PIP/DVD IN, PIP TEXT TEXT — P1 BOARD (Conductor Side) — — P1 BOARD (Component Side) — • : Pattern from the side which enables seeing. • : Pattern from the side which enables seeing. •...
Page 64
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 RM-871 (zg) (h1) (h2) (zr) VM/GREEN DY KEY, LED, AC SW FRONT IN, KEY RED DY SURROUND — S BOARD (Conductor Side) — — S BOARD (Component Side) — — H1 BOARD — H1 BOARD Terminal name of semiconductors in silk screen printed circuit (...
(7) Schematic Diagrams of H1, H2, S, ZG and ZR Boards CN1434 T0 E BOARD CN503 CN1405 G-H(+) H(MID) DY(H) TO E BOARD CN504 CN3004 R-H(+) 5B3PS H(MID) WHT-L (KEY,LED,AC SW) H.IN G-H(-) DY(H) V.IN TO G BOARD CN6007 SUB DY CN1433 H.IN R-H(-)
(8) Schematic Diagrams of G and UG Boards CN6006 CN6007 4B2P 5B3P TO H1 BOARD TO H1 BOARD CN3003 CN3004 R6002 8.2M CN2901 C6007 0.0022 WHT-L 250V :S-MICRO (POWER SUPPLY) R6024 R6026 DVD Y 0.22 0.22 R2901 C2901 R2902 C6001 D2901 0.0022 UDZ-9.1B...
Page 67
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 RM-871 (ug) POWER SUPPLY DVD IN — G BOARD — G BOARD Terminal name of semiconductors in silk screen printed circuit ( Ref. Q6001-Q6006, Q6010-Q6012, Q6016-Q6018 : Refer to Terminal name of semiconductors in silk screen printed circuit (see page 63) —...
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 SECTION 7 EXPLODED VIEWS • Items with no part number and no • Items marked " * " are not stocked since The components identified by shading description are not stocked because they they are seldom required for routine ¡...
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 7-2. CABINET AND PANEL BLOCK (KP-EF41) The components identified by shading ® : 7-685-663-79 +BVTP 4X16 ¡ and mark are critical for safety. r : 7-685-663-71 +BVTP 4X16 Replace only with part number specified. 4 : 7-685-648-79 +BVTP 3X12 CHASSIS AND PICTURE TUBE...
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 7-3. CHASSIS AND PICTURE TUBE BLOCK (KP-EF41) The components identified by shading r : 7-685-663-71 +BVTP 4X16 ¡ and mark are critical for safety. 4 : 7-685-648-79 +BVTP 3X12 Replace only with part number specified. REF.NO.
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 7-5. CABINET AND PANEL BLOCK (KP-EF48) The components identified by shading r : 7-685-663-71 +BVTP 4X16 ¡ and mark are critical for safety. 4 : 7-685-648-79 +BVTP 3X12 Replace only with part number specified. CHASSIS AND PICTURE TUBE BLOCK REF.NO.
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 7-6. CHASSIS AND PICTURE TUBE BLOCK (KP-EF48) The components identified by shading r : 7-685-663-71 +BVTP 4X16 ¡ and mark are critical for safety. 4 : 7-685-648-79 +BVTP 3X12 Replace only with part number specified. REF.NO.
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 7-8. CABINET AND PANEL BLOCK (KP-EF53) The components identified by shading r : 7-685-663-71 +BVTP 4X16 ¡ and mark are critical for safety. 4 : 7-685-648-79 +BVTP 3X12 Replace only with part number specified. CHASSIS AND PICTURE TUBE BLOCK REF.NO.
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 7-9. CHASSIS AND PICTURE TUBE BLOCK (KP-EF53) The components identified by shading r : 7-685-663-71 +BVTP 4X16 ¡ and mark are critical for safety. 4 : 7-685-648-79 +BVTP 3X12 Replace only with part number specified. REF.NO.
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 7-11. PANEL AND COVER BLOCK (KP-EF61) The components identified by shading r : 7-685-663-71 +BVTP 4X16 ¡ and mark are critical for safety. 4 : 7-685-648-79 +BVTP 3X12 Replace only with part number specified. 505 504 CHASSIS AND PICTURE TUBE BLOCK...
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 7-12. CHASSIS AND PICTURE TUBE BLOCK (KP-EF61) The components identified by shading r : 7-685-663-71 +BVTP 4X16 ¡ and mark are critical for safety. 4 : 7-685-648-79 +BVTP 3X12 Replace only with part number specified. REF.NO.
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. (p1) Replace only with part number specified. SECTION 8 ELECTRICAL PARTS LIST REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified by [ in this NOTE: service.
Page 82
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. (p1) Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK C2803 1-163-038-00 CERAMIC CHIP 0.1MF L2409 1-410-210-21 INDUCTOR CHIP 33UH C2804 1-104-664-11 ELECT 47MF...
Page 83
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. (p1) Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R2303 1-216-049-00 RES,CHIP 1/10W R2456 1-216-045-00 RES,CHIP 1/10W R2305 1-216-025-00 RES,CHIP 1/10W...
Page 84
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. (p1)(ag) Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R2811 1-216-049-00 RES,CHIP 1/10W C110 1-164-232-11 CERAMIC CHIP 0.01MF 10% 50V R2812 1-216-045-00 RES,CHIP 1/10W...
Page 85
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. (ag) Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK C342 1-163-133-00 CERAMIC CHIP 470PF C1008 1-163-251-11 CERAMIC CHIP 100PF C343 1-163-038-00 CERAMIC CHIP 0.1MF C1009 1-163-038-00 CERAMIC CHIP 0.1MF...
Page 86
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. (ag) Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK C2037 1-163-133-00 CERAMIC CHIP 470PF C2094 1-163-009-11 CERAMIC CHIP 0.001MF 10% 50V C2038 1-164-346-11 CERAMIC CHIP 1MF C2095 1-164-232-11 CERAMIC CHIP 0.01MF...
Page 87
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. (ag) Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK FB20031-414-235-11 INDUCTOR CHIP Q303 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q304 8-729-026-49 TRANSISTOR 2SA1037AK-T146-R FB20041-414-235-11 INDUCTOR CHIP...
Page 88
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. (ag) Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R113 1-216-041-00 RES,CHIP 1/10W R358 1-216-025-00 RES,CHIP 1/10W R114 1-216-069-00 RES,CHIP...
Page 89
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. (ag) Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R446 1-216-081-00 RES,CHIP 1/10W R1032 1-216-073-00 RES,CHIP 1/10W R447 1-216-049-00 RES,CHIP...
Page 90
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. (ag)G Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R2025 1-216-025-00 RES,CHIP 1/10W R2083 1-216-048-00 RES,CHIP 1/10W R2084 1-216-041-00 RES,CHIP 1/10W...
Page 91
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK C6013 1-117-227-11 FILM 10% 450V CN6008*1-564-509-11PLUG, CONNECTOR 6P C6014 1-126-968-11 ELECT 100MF 20% 50V...
Page 92
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK <FERRITE BEAD> <RESISTOR> FB60091-410-397-21 FERRITE 1.1UH R6000!1-202-885-91SOLID 20% 1/2W R6001 1-216-049-00 RES,CHIP 1/10W...
Page 93
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. G(cr) Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R6056 1-216-073-00 RES,CHIP 1/10W C712 1-107-662-11 ELECT 22MF 20% 250V R6057 1-216-073-00 RES,CHIP...
Page 94
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. (cr)(cg)(cb) Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK <SPARK GAP> R736 1-249-425-11 CARBON 4.7K 1/4W SG701 1-519-422-11 GAP, SPARK R737...
Page 95
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. (cb)(v2) Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK <TRANSISTOR> C3532 1-163-038-00 CERAMIC CHIP 0.1MF C3538 1-163-099-00 CERAMIC CHIP 18PF Q761 8-729-200-17 TRANSISTOR 2SA1091-O...
Page 96
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. (v2)D Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R3529 1-216-049-00 RES,CHIP 1/10W C1521 1-164-232-11 CERAMIC CHIP 0.01MF 10% 50V R3533 1-216-025-00 RES,CHIP 1/10W...
Page 97
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK C1721 1-164-232-11 CERAMIC CHIP 0.01MF 10% 50V <DIODE>...
Page 98
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK <CHIP CONDUCTOR> Q1711 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q1801 8-729-120-28 TRANSISTOR 2SC1623-L5L6 JR1502 1-216-295-91 SHORT Q1802 8-729-120-28 TRANSISTOR 2SC1623-L5L6 JR1503 1-216-295-91 SHORT...
Page 99
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R1609 1-216-081-00 RES,CHIP 1/10W R1722 1-216-033-00 RES,CHIP 1/10W R1725 1-216-065-00 RES,CHIP 4.7K...
Page 100
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R1794 1-216-089-00 RES,CHIP 1/10W <TERMINAL BOARD> R1795 1-216-089-00 RES,CHIP 1/10W R1802 1-215-900-11 METAL OXIDE 22K TB16011-694-303-11 TERMINAL, PUSH...
Page 101
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK C545 1-104-665-11 ELECT 100MF 20% 25V C850 1-102-973-00 CERAMIC 100PF C548...
Page 102
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. The components identified by [ in this manual have been carefully factory-selected for Replace only with part number specified. each set in order to satisfy regulations regarding X-ray radiation. Should replacement be required, replace only with the value originally used.
Page 103
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R506 1-247-883-00 CARBON 150K 1/4W R566 1-249-377-11 CARBON 0.47 1/4W F R507...
Page 104
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R831 1-249-414-11 CARBON 1/4W R888 1-247-807-31 CARBON 1/4W R832 1-249-441-11 CARBON...
Page 105
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. E(h1) Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R943 1-249-441-11 CARBON 100K 1/4W R998 1-249-425-11 CARBON 4.7K 1/4W...
Page 106
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. (h1)(ug)(h2) Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK <SWITCH> * A-1375-169-A H2 BOARD, COMPLETE ****************************** S3001 1-571-532-21 SWITCH, TACTIL (PROG+) S3002 1-571-532-21 SWITCH, TACTIL (PROG-)
Page 107
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK * A-1390-783-A S BOARD, COMPLETE IC2211 8-759-009-06 IC MC14052BF **************************** <TRANSISTOR>...
Page 108
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. S(zr)(zg) Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R2253 1-216-065-00 RES,CHIP 4.7K 1/10W C1434 1-107-362-11 FILM 0.0047MF 10% 200V R2254 1-216-063-91 RES,CHIP 3.9K...
Page 109
KP-EF41HK/ME/MN/SN, EF48HK/ME/MN/SN, The components identified by shading KP-EF53HK/ME/MN/SN, EF61HK/ME/MN/SN RM-871 ¡ and mark are critical for safety. (zg) Replace only with part number specified. REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK R1442 1-247-815-91 CARBON 1/4W ACCESSORIES & PACKING MATERIALS R1443 1-249-377-11 CARBON 0.47 1/4W F...