Canon Super G3 Fax Board-J1 Service Manual

Revision 0

Hide thumbs

Table Of Contents

100

101

102

103

104

105

106

107

108

109

Table of Contents

Quick Links

Download this manual

SUPER G3

FAX BOARD-J1

REVISION 0

FY8-13HD-000

JUNE 2001

200

CANON SUPER G3 FAX BOARD-J1 REV .0 JUNE 2001 PRINTED IN U.S.A.

Table of Contents

Troubleshooting

Summary of Contents for Canon Super G3 Fax Board-J1

Page 2 Application This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation, maintenance, and repair of products. This manual covers all localities where the products are sold. For this reason, there may be information in this manual that does not apply to your locality.
Page 3 Provides a description of the nature of an error indication. Refers to the Copier Basics Series for a better understanding of the contents. COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 4 Board are offered; for others, see the separately prepared "G3 Facsimile Error Code List" (Rev.1; HY8- 23A0-010). COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 5 All service persons are expected to have a good understanding of the contents of this Ser- vice Manual and all relevant Service Information bulletins and be able to identify and isolate faults in the machine. COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 6: Table Of Contents
1.3 Installation to the Host Machine 4-2 Checking the Operation of FAX 1.4 Connecting to the Telephone Line Functions ........4-9 ........... 4-7 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 7 1.3 NCU PCB (120V) (1/2) ..A-10 (100V/120V)(1/8) ..... A-1 1.4 G3 MODULAR PCB (120V) . A-13 1.2 OFF-HOOK DETECTION PCB ..........A-9 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 9 It transmits images at a speed of 33.6 kbps max., taking advantage of a V.34-standard mo- dem recommended under ITU-T. Super G3 FAX Board-J1 Off-hook detection Unit Speaker Unit F01-101-01 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 10: Specifications
Size of Originals for Transmission A3, A4, A4R, A5R, B4, B5, B5R LTR, LTRR, LGL, 11×17, STMT, STMTR DADF-H1 in use: transmission of double-sided originals possible COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 11 A3(297×420mm) Density of scanning lines 600×600dpi Trial shot Memory Specifications Image memory 3,700 pages (approx; using Canon FAX standard Chart No. 1) memory type hard disk (about 4 GB of image area) Method of Storage JBIG Other Specifications ECM Function...
Page 12: List Of User Modes
Off Stamp Document (if DADF-H1 in use) 4. RX Settings ECM RX: on*, off Received Page Footer: on, off* *Factory Setting COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 13 RX report: on*, off 2. Print List>Fax address book list 1, address book list 2, group Destination list, user’s data list *Factory Setting COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 14 (5 time), select Days (5 times by day of week), off* 5. PIN Code Access: on, off* on>PIN Code Position Option*, Prefix, Suffix 6. Receive password: 20 characters *Factory setting. COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 16: G3 Fax Control Pcb
3.3 V. ASIC (IC46) MB87J1762PFVS from Fujitsu is an ASIC (chip-D) used for JBIG coding/decoding and SDRAM control. A 64M-bit SDRAM is connected to it. COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 17 G3 demodulation as prescribed by ITU-T V.17, V.21, V.27ter, V.29, and V.34. OGMIC (IC44) OGMIC is used to reproduce voice messages. COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 18: Ncu Pcb
The primary side of the NC board circuit is controlled by means of a line voltage of +48 VDC; the DC component is cut out using a capacitor, thereby converting only the audio signals in voltages of a model level. COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 19 FC detection circuit of the G3 fax control PCB at all times, the +5 VB voltage is sent to the G3 fax control PCB by way of the Off-hook detection PCB. COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 20 J715 J900 J9020 J2002 J712 1--2 1--2 1--4 Main Main Composite Speaker Arrester Controller power Power Supply PCB Supply PCB J1059 J204 J124 F02-401-01 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 21 3.3V ground FNSELECT IN 1284 active (H=ECP mode) FNINT nReverse request FNFAULT nPeripheral request (L= data from peripheral present) FNAUTOFD reverse mode control signal COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 22 VHGND VH ground VHGND VH ground off-hook detection power supply ESS 3.3 V all-time drive power supply +3.3V logic drive voltage DGND digital ground COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 23 NCU PCB (J4)¬ ®Off-hook detection PCB (J714) J714 signal Description off-hook detection power supply ground COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 24 Modular PCB (J912)¬ ®Modular Cable J912 Cable signal Description not used not used telephone line 1 connection telephone line 1 connection not used not used COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 26: Points To Note For Troubleshooting
G3 FAX Board. (This way, you will have to remove fewer screws as compared with disconnecting the connector on the controller side.) F03-103-01 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 27 The presence of a backup will make restoration as in response to a fault on the hard disk easy. Remote UI Additional Functions>Custom Settings>Fax Settings>Import/Export F03-104-01 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 28 Check to find out if the power line to the G3 FAX Board is correctly connected. (J104 on the G3 fax control PCB and J124 on the low-voltage power supply PCB) COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 29 The DONE stamp fails to operate. Cause: the stamp has run out of ink. Remedy: Replace the stamp cartridge. COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 30 For method 1 above, upgrading is done by mere replacement of the DIMM ROM shown in the following diagram: DIMM ROM G3 fax control PCB F03-400-01 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 31 If upgrading has failed (as by turning off the power in the middle by mis- take), you must replace the DIMM ROM to upgrade. Take extra care. COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 33: Checking The Contents
1.1 Checking the Contents Open the shipping box, and check to make sure that none of the following is missing: F04-101-01 [1] Super G3 FAX Board-J1 ..... 1 unit [6] Modular cover ....... 1 pc. [2] User’s Guide ........1 pc.
Page 34: Before Starting The Work
1.3 Installation to the Host Machine 1) Remove the seven screws [1], and de- tach the rear cover. F04-103-01 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 35 [2]. (3 pc. on the right, 2 pc. at the bottom) F04-103-03 4) Mount the Board [2] with three screws [1]. F04-103-04 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 36 G3 FAX Board. F04-103-06 7) Remove the two screws [1], and detach the connector cover [2] of the Board. F04-103-07 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 37 [2]. F04-103-09 10) Mount the speaker unit [1] with two screws [2], and connect the speaker to the cable [3] of the machine. F04-103-10 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 38 F04-103-11 13) Mount back all covers. 14) Attach the Super G3 label where indi- cated. 15.8 Unit : mm F04-103-12 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 39: Connecting To The Telephone Line
[1] to the modular jack (middle) for the telephone line (on the machine). F04-104-01 4) Turn on the main power of the host ma- chine. COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 40: Setting Telephone Number And The Type Of Line
3) Make the following selections: user mode>custom fax settings>user settings >tel line type; then, select either tone or pulse to suit the type of telephone line used. (default: tone) COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 41: Checking The Operation Of Fax Functions
5) Ask the party taking party in the communication test to send a test document to the user’s telephone number to see if it is received correctly. COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 43: Outline
Use it to initialize various data to their initial settings. #9 TEST: Use it to execute various tests. #10 REPORT: Use it to print a report. COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 44: Using Service Mode
Select it to use the FAX board’s service mode.* BOARD: Select it to use the option board’s service mode.* *Indicated only when installed. COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 45: Guide To The Keys
The settings related to the Board are loaded from the hard disk to the G3 fax control PCB, requiring that that main power be turned off and then on again whenever a change has been made. COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 46: List Of Service Mode Items
(ATT) V.34 modulation speed upper limit V.34 data speed upper limit pseudo CI signal frequency 011 to 020 Not used COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 47 CNG monitor time for answering device function no sound detection level for answering device function preamble detection time for V21 low-speed flag 028-80 not used COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 49: Using The Bit Switches(#1Sssw)
Not used the service data if so indicated. Its initial setting must always be used. Sssw Menu Num Ncu Type ISDN Print Clear Test Report <READY> <1/7> SW01 SW02 SW03 SW04 SW05 SW06 SW07 SW08 F05-301-01 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 50 When “setting restricted” is selected, certain items cannot be set by the user, depending on the country setting. When ”setting possible” is selected, all items are user selectable, re- gardless of the country type setting. COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 51 Any of the following error code may be indicated because of an echo at time of reception: Memo ##005, ##101, ##106, ##107, ##114, ##200, ##201, ##790 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 52 1850-Hz total signal when transmitting the DIS signal. International transmission (3): select it to transmit a 1650-Hz total signal when transmitting the DIS signal. 5-10 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 53 Be sure to change bit 4 before changing this bit; if errors still occur, change this bit. When ‘high speed’ is selected, only high-speed signals (images) will be re- ceived after transmission of the CFR signal. 5-11 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 54 Use it to enable/disable transmission of the CED signal in manual reception mode. Select ‘transmit’ if the other party doe not start transmission when manual reception is started. 5-12 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 55 Use it to enable/disable transmission of bit 33 and thereafter (DIS signal). If ‘prohibit’ is selected, the Super Fine reception function or Memory Box function cannot be used for communications from non-Canon machines. [Bit 4] Use it to enable/disable declaration of the use of cut sheets (DIS signal).
Page 56 10 sec after the end of the communication. When ‘retain’ is selected on the other hand, the display will remain until any key is pressed. 5-14 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 57 When ‘disable’ is selected using bit 7, the time-out length for a single page for all modes will depend on the setting of bit 0 and bit 1. 5-15 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 58 8 min 16 min 32 min 64 min Time-Out Length for Reception Time-out time 8 min 16 min 32 min 64 min 5-16 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 60 [Bit 7] Use it to enable/disable generation of an error report in response to a press on the Stop key to suspend transmission. 5-18 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 61 [Bit 5] Select whether the transmitter falls beck during V.34 transmission. If "Prohibit" is se- lected, teh transmitter does not fall back. 5-19 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 62: Menu Switch Setting (#2 Menu)
Any of the following error codes may be indicated at time of transmission because of the line condition: ##103, ##107, ##114, ##201, ##790, ##793 5-20 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 63 Use to set an upper limit to the data transmission speed for the V.34 primary channel be- tween 2.4K and 33.6K bps in increments of 2400 bps. (0: 2.4K to 13: 33.6K bps). 5-21 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 64: Setting Various Parameters (#3 Numeric Param.)
← (yyyyy) {aaaaa~bbbbb} xxxxx ← (yyyyy) {aaaaa~bbbbb} xxxxx ← (yyyyy) {aaaaa~bbbbb} xxxxx ← (yyyyy) {aaaaa~bbbbb} xxxxx ← (yyyyy) {aaaaa~bbbbb} xxxxx F05-501-01 5-22 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 65 CNG monitor time for answering 0 to 999 device function no sound detection level for 0 to 7 answering device mode preamble detection time for V21 20 (×10ms) low-speed flag 5-23 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 66 Use it to set the time for identifying the line connection. Raise this parameter if errors oc- cur frequently at time of communication because of the condition of the line. 5-24 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 67 Use it to detect the time of detection after which command analysis is started after detect- ing V.21 low-speed command preambles continuously for a specific period of time. 5-25 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 68: Selecting The Country (#5 Type)
B4 image is received, printing will be by division and on B5 horizontal recording paper. *Image B4 or shorter and that cannot be printed by division and on A4 recording paper. 5-26 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 69 Use it to force printing on B5 by reduction (of A4 received image). Setting this bit will cause all A4 reports to be printed in B5 by division. 5-27 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 70: Numeric Param
(as when it is longer than the effective recording length). [No. 4] Use it to set the leading-edge margin for the effective recording length. 5-28 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 71: Initializing The Settings (#8 Clear)
(except image data & Type settings) COUNTER number of prints, number of pages read 5-29 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 72 ISDNMOD (not supported) Using the Mode • Press an item to highlight; then, press the OK key to bring up the respective Items screen. 5-30 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 73: Relay Test
1) Select the relay to test from among the items indicated; then, use the Up/Down key to switch between ON and OFF. Note that some of the relays indicated may not be mounted on the NCU. 5-31 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 74 Print Clear Test Report <READY> <MODEM> <FREQ> <1/1> 462Hz 1100Hz 1300Hz 1500Hz 1650Hz 1850Hz 2100Hz F05-901-02 ‘RBT’ above is yet to be supported. 5-32 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 75: G3Tx
<MODEM> <G3TX> <2/2> 14400bps 300-ALL0 300-ALL1 300-1:1 300-1:4 300-4:1 F05-901-04 ‘300-ALL0’ through ‘300-4: 1’ of the above items are yet to be supported. 5-33 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 76: Dtmf Transmission Test
1) Select an item from those indicated on the screen, and press the key on the keypad cor- responding to the DTMF signal to test. ‘SHORT’ in the above items is yet to be supported. 5-34 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 77 Using the Mode 1) Select [SPEED], and use the Up/Down key to select the speed to test. 2) Select the baud rate to test. 5-35 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 78: Function Test
Sssw Menu Num Ncu Type ISDN Print Clear Test Report <1/1> <READY> <FACULTY> <G34800TX> G34800TX F05-902-01 5-36 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 79: Service Report
Service Report 10.1 System Data List A system data list indicates the current settings of the service soft switches and service parameters. F05-1001-01 5-37 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 80: System Dump List
*5: number of transmitted/received pages according to coding method. *6: number of transmitted/revised pages according to mode. *7: number of occurrences according to error code. 5-38 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 81 CHAPTER 5 SERVICE MODE Guide to Indication ##280 1 number of number of number of ##280 errors ##281 errors ## 282 errors 5-39 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 82 *7: bit 1 through 96 of DIS, DCS, or DTC transmitted. *8: RX for protocol signal received; TX for protocol signal transmitted. 5-40 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 83: Error Transmission Report
CHAPTER 5 SERVICE MODE 10.3 Error Transmission Report The following report combines an error transmission report with service error codes and error dump list. F05-1003-01 5-41 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 85 The display will also indicate the following in response to an error: System Monitor>Fax>Details F06-101-01 COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 86 Bit 4 ® 1: after CFR transmission, ignore low-speed signal for 1500 msec. ® 0: after CFR transmission, ignore low-speed signal for 700 msec. COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 87 In polling reception, other party does not have password reception. #099 T/R during communication, stop key pressed #102 T/R F code/password mismatch #107 R direct transmission error #995 T/R memory communication reservation cancel COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 88 V.8 late start, V.8 ability of DIS from receiving party i detected for CI signal transmission; procedure fails, causing T1 time-out and releasing line COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 89 Exceed Protocol Retransmission Limit Due to Failure to Receive Significant Signals after PPS-EOP Transmission during ECM Transmission ##767 T Receive DCN after PPS-EOP Transmission during ECM Transmission COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 90 EOR-EOP Transmission during ECM Transmission ##789 T Receive ERR after EOR-EOP Transmission during ECM Transmission ##790 R Transmit ERR after EOR-Q Reception during ECM Reception COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 91 Receive All 0 PPR during ECM Transmission ##795 T/R Trouble in the decording processing during communication ##796 T/R An error occurred during the course of decoding processing in communication COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 92: Causes Of And Remedies For Newly Added Error Codes
Use service data #1 SSSW SW28 bit 1 to prohibit the V.8/V34 procedure. Use service data #2 MENU No. 07 to increase the transmission level in the range between -8 and -15 dBm. COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3 FAX BOARD-J1 REV.0 JUNE 2001...
Page 93 Use service data #1 SSSW SW28 bit 1 to prohibit the V.8/V.34 procedure of the caller. Use service data #2 MENU No. 07 to increase the transmission level in the range between -8 and -15 dBm. COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SUPER G3FAX BOARD-J1 REV.0 JUNE 2001...
Page 108 Prepared by Office Imaging Products Quality Assurance Center CANON INC. Printed in U.S.A. REVISION 0 (JUNE 2001) (32205) 5-1, Hakusan 7-chome, Toride-shi, Ibaraki 302-8501 Japan COPYRIGHT© 2001 CANON INC. CANON SUPER G3 FAX BOARD-J1 REV .0 JUNE 2001 PRINTED IN U.S.A.
Page 109 This publication is printed on 100% recycled paper. PRINTED IN U.S.A 0601MX.XX-1...

Canon Super G3 Fax Board-J1 Service Manual

Chapter 1 Outline

Chapter 2 Basic Operation

Chapter 3 Troubleshooting

Chapter 4 Installation

Chapter 5 Service Mode

Chapter 6 Error Codes

Appendix

Quick Links

Troubleshooting

Related Manuals for Canon Super G3 Fax Board-J1

Summary of Contents for Canon Super G3 Fax Board-J1

Table of Contents