Related Manuals for Toshiba Strata DKT
Summary of Contents for Toshiba Strata DKT
- Page 1 Digital Solutions Division Strata CIX and CTX IPT/DKT Telephone User Guide November 2005...
- Page 2 CIX-UG-DKIPT-VD Version D, November 2005 CAUTION! Do not use cleansers that contain benzene, paint thinner, alcohol or other solvents on the telephone's rubber feet. The color of the rubber may transfer to the desk or mounting surface. © Copyright 2005 Toshiba America Information Systems, Inc.
- Page 3 TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TAIS”) Digital Solutions Division License Agreement IMPORTANT: THIS LICENSE AGREEMENT (“AGREEMENT”) IS A LEGAL AGREEMENT BETWEEN YOU (“YOU”) AND TAIS. CAREFULLY READ THIS LICENSE AGREEMENT. USE OF ANY SOFTWARE OR ANY RELATED INFORMATION (COLLECTIVELY, “SOFTWARE”) INSTALLED ON OR SHIPPED WITH A TAIS DIGITAL SOLUTIONS PRODUCT OR OTHERWISE MADE AVAILABLE TO YOU BY TAIS IN WHATEVER FORM OR MEDIA, WILL CONSTITUTE YOUR ACCEPTANCE OF THESE TERMS, UNLESS SEPARATE TERMS ARE PROVIDED BY THE SOFTWARE SUPPLIER.
-
Page 4: Limited Warranty
The sole obligation of TAIS or Toshiba Corporation under this warranty, or under any other legal obligation with respect to the equipment, is the repair or replacement by TAIS or its authorized dealer of such defective or missing parts as are causing the malfunction with new or refurbished parts (at their option). -
Page 5: Table Of Contents
Fixed Buttons...9 Flexible Buttons...10 Liquid Crystal Display...10 Chapter 2 – The Basics Important - Read First...11 What’s My Line? ...11 Which Outgoing/Incoming Call Features Do I Have? ...12 Making a Call...13 Hot Dialing ...13 Strata CIX and CTX IPT/DKT Telephone 11/05... - Page 6 LCD Contrast Adjustments...25 Basic SoftIPT Functions ...26 Start the SoftIPT ...26 Making a Call ...26 Switching a Call to Your Headset ...27 Creating a Directory ...27 Using the Directory to Call...27 Labeling Feature Buttons...28 Strata CIX and CTX IPT/DKT Telephone 11/05...
- Page 7 Direct Inward System Access (DISA) ...55 Direct Station Selection Buttons (Hotline) ...55 Distinctive Ringing ...56 Do Not Disturb...57 Setting DND for Another Extension...58 Door Lock(s) ...58 Door Phone(s) ...59 Strata CIX and CTX IPT/DKT Telephone 11/05 Contents Chapter 3 – Advanced Operation...
- Page 8 Advanced Speed Dial Operation ...70 Tone/Pulse Dialing...71 Uniform Call Distribution...72 Login/Logout ...72 Voice Mail Call Monitor...74 Voice Mail - Direct Transfer...75 Voice Mail - Return Call...75 Voice Mail Soft Keys...76 Call Recording ...81 Other Voice Mail Features...82 Strata CIX and CTX IPT/DKT Telephone 11/05...
- Page 9 Programming Feature Buttons ...111 User Programming Mode ...112 Flexible Button Codes...112 Setting/Changing a Flexible Button’s Function ...113 One Touch Buttons ...114 Changing a One Touch Button ...114 Strata CIX and CTX IPT/DKT Telephone Chapter 4 – IPT2008-SDL LCD Features 11/05 Contents...
- Page 10 Night Transfer Button...126 Appendix A – Centrex Application Flexible Directory Numbering ...127 Centrex Feature Buttons ...127 Ringing Repeat...127 Delayed Ringing ...128 Appendix B – Button Labels Appendix C – FeatureFlex Interactions Index ...135 Strata CIX and CTX IPT/DKT Telephone 11/05...
- Page 11 Introduction This user guide describes how to use the Toshiba Strata series telephone products with Strata CIX670, CIX200, CIX100, CIX100-S, and CTX28 telephone systems: • Strata IP telephone (IPT2010-SD, IPT2020-SD and IPT2008-SDL) • Strata DKT3000- and 2000-series digital telephones • Strata Digital Add-on Module (DADM) •...
-
Page 12: Introduction Organization
• Appendix B – Button Labels lists the feature button designations of the 3000- series digital telephone models. • Appendix C – FeatureFlex Interactions shows how the FeatureFlex features interact with other FeatureFlex and some CIX features. viii Strata CIX and CTX IPT/DKT Telephone 11/05... -
Page 13: How To Use This Guide
10-2, 10-3, and 10-4. A station is considered busy when all Extension extensions are being used. Number The naming convention for DKT assignments within Toshiba is Note Directory Numbers. For clarity and ease of understanding, the terms Extension Number and Phantom Extension Number will be used in this document in lieu of PDN and PhDN. -
Page 14: Related Documents/Media
Publication Information on the back of the document’s title page. Refer to the following for more information: • Strata DKT3001/2001 Digital Single Line Telephone User Guide • Strata DKT/IPT Telephone Quick Reference Guide • My Phone Manager User Guide • Strata CIX Application Software and CIX Documentation Library CD-ROM •... -
Page 15: Chapter 1 - The Grand Tour
The 2000-series IP telephones offer all the same features as the 3000/3200-series digital telephones, except the IPT2010-SD does not support Speaker Off-hook Call Announce (OCA). All the Toshiba IPT2000-series telephones have speakerphones that enable you to place and receive calls without lifting the handset. - Page 16 The Grand Tour IPT2000-series Telephones Toshiba LCD telephones provide easy access to frequently-used features. Prompts guide you through specific tasks. They also provide Outside Line Identification, User Name/Number, Call Duration, Date/Time of Day displays, and the ability to display names and telephone numbers of outside, incoming callers.
-
Page 17: Fixed Buttons
• Voice Mail Call Monitor lets you listen to a caller while the caller records a message in your voice mailbox. Table 16 on page 129 Note One Touch Buttons. Strata CIX and CTX IPT/DKT Telephone Chapter 2 – The Speed Dial (lightning buttons) Volume Control... -
Page 18: Liquid Crystal Display
LCD soft keys in this manual. “Using Your LCD” on page 31 switches you from the Call Forward (CF) display to the User Name advances you through information. Strata CIX and CTX IPT/DKT Telephone CF-ALL 202-203+ AUG 08 MON 03:56... -
Page 19: Softipt
PCs with the Microsoft software (OS). The Windows XP version of the SoftIPT GUI is shown below. The Toshiba SoftIPT integrates the power of a PC with all of the features available on a IPT2010-SD and DKT3000/3200-series telephone, except background music. The main difference is that you use a mouse or stylus to select buttons. -
Page 20: Softipt Icons
You can also install the SoftIPT on a laptop, tablet or desktop PC and a Pocket PC at the same time, but each should have a unique station ID and license. The SoftIPT works with Toshiba Pocket PC with Windows Pocket PC 2003 OS... -
Page 21: Dkt3000/3200-Series Telephones
Digital Add-on module DADM (DADM3120/3220) and 60-key DSS Console (DDSS3060/3260). For user instructions, refer to Console. All of the DKT3000/3200-series Toshiba speakerphones enable you to place and receive calls without lifting the handset. Toshiba LCD telephones provide easy access to frequently-used features. Prompts guide you through specific tasks. - Page 22 The Grand Tour DKT3000/3200-series Telephones DKT3210-SD Telephone Strata CIX and CTX IPT/DKT Telephone 11/05...
-
Page 23: Fixed Buttons
DKT3220-SD Telephone Fixed Buttons The fixed buttons on your telephone enable you to perform standard functions quickly and easily. These buttons are described in Strata CIX and CTX IPT/DKT Telephone Chapter 2 – The 11/05 The Grand Tour DKT3000/3200-series Telephones... -
Page 24: Flexible Buttons
DKT3000/3200-series Telephones Flexible Buttons All Flexible Buttons must be programmed for your telephone in system programming and vary for individual telephones. If a button does not appear on your display or telephone keystrip label, see your System Administrator for button assignments. -
Page 25: Chapter 2 - The Basics
Be sure to check with your System Administrator and make sure you know which features are enabled on your system. Use the check boxes mark which features you have. LEDs on your telephone flash at different speeds depending on the function Note performed. Flash rates can be found under 120. -
Page 26: Which Outgoing/Incoming Call Features Do I Have
Voice First Signaling: Internal incoming call – your telephone does not ring; instead you hear a long tone, then the caller’s voice. Talk in the direction of your telephone, or answer the call as you normally would by lifting the handset or Spkr... -
Page 27: Making A Call
Making a Call There are three ways to originate a call from your IP/digital telephone: Hot Dialing 1. To make a call using Hot Dialing, dial the number. When you start to dial, the extension button, Spkr and Mic LEDs light. Digits display as they are dialed. -
Page 28: Dial Directory
Making a Call Dial Directory This feature requires CIX R4.0 software and above for Toshiba DKT3000/3200 and IPT2000-series 10- and 20-button small LCD telephones. You can make a call by selecting a name from your telephone directory. Your telephone will display names (First Name, Last Name or vice versa) depending on the way they have been programmed in the telephone system. -
Page 29: Answering A Call
The extension LED flashes green (incoming call). The Microphone LED lights steady red (microphone is active). The Speaker LED flashes red. 1. Do not lift the handset; speak toward the telephone in a normal voice. Spkr 2. Press or take the handset off-hook before transferring the call or placing it on hold. -
Page 30: Message Waiting
An extension can receive up to four simultaneous Message Waiting indications and LCD messages. One message is reserved for the Message Center. Your telephone can be programmed to have up to four additional (flexible) Message Waiting buttons/LEDs. Check with your System Administrator to see if these buttons have been programmed on your telephone. -
Page 31: Turning On/Off Mw Led On Another Extension
2. Press . The Msg LED flashes red on the called telephone. At your telephone, the Msg LED lights steady red and the LCD shows the station number where you set a Message Waiting light. Example: “MW SET TO 3620.”... -
Page 32: Call Transfer
• If you get voice mail, you can leave a message or hang up and let the transferred caller leave a message. • If you hear a long single tone, then announce the call over the called telephone’s speaker. 3. Transfer with Camp On: If the station to which you want to transfer the call is busy, you may hang up and the transferred trunk or station will be camped on to the busy destination. - Page 33 2. Dial the extension where you wish to transfer the call.The call rings the destination station and your telephone returns to the idle state. If your telephone does not go idle, the destination may be located in a remote node, so you need to hang up to return to idle state.
-
Page 34: Conference Calls
The actual number of conference parties with acceptable volume levels depends on the local and far end telephone line conditions. The person who initiates the conference call is the Master. If, after the conference is established and the Master exits the conference, the first station to have been added to the conference becomes the Master. -
Page 35: Adding Voice Mail To A Conference
Connecting Two Outside Lines 1. While talking on an outside call, press LED flashes (conference rate). 2. Dial an outside line access code and outside telephone number. 3. After the party answers, press and all parties are conferenced. If you receive a busy tone or if the station does not answer, press the flashing extension button to return to the original connection, press 4. -
Page 36: Conference Add/Split/Join/Drop
2. Answer the incoming ringing call. 3. While speaking to the incoming caller, press 4. Press the blinking DN where the first caller/Conference was placed on hold. Cnf/Trn 5. Press twice to join all parties together. Strata CIX and CTX IPT/DKT Telephone Cnf/Trn button. 11/05... - Page 37 To Split from a conference 1. While in a conference call on a DKT3000/ 3200-series phone, press the key or Split button. The telephone LCD shows first conference party member. Notice the number 1 preceeding extension 200 (1:200) shown right 2. Press the...
-
Page 38: Hold
• To return to the held call, press the held • If you do not return to the held call within a specified time, it rings back to your telephone. The call remains camped-on to your station indefinitely. • If the held party hangs up, the call is released. -
Page 39: Volume Control
To adjust Ring Tone, Handsfree Answerback and Speaker Off-hook Call Announce Make sure the telephone is idle and the handset is on-hook. Press the increase volume and telephone’s ring tone, Handsfree Answerback and Speaker Offhook Call Announce simultaneously. -
Page 40: Basic Softipt Functions
BGM (#490) on the SoftIPT. It conflicts with incoming calls. Tour, page 5 for an overview of the SoftIPT. Select or click on Hold dial pad buttons to call. Click Speaker, then dial Strata CIX and CTX IPT/DKT Telephone 7797 11/05... -
Page 41: Switching A Call To Your Headset
Switching a Call to Your Headset You can switch a call from your IPT2010-SD, IPT2020-SD, or DKT3000/3200-series digital telephone to the SoftIPT by placing the call on Hold and using the Call Pickup feature. Hold 1. Press on your digital telephone. -
Page 42: Labeling Feature Buttons
The Basics Basic SoftIPT Functions Labeling Feature Buttons From the Softphone Setting window, you can change six telephone button labels on a PDA and 10 on a PC. Changing the label does not change the function. To change the function, see “Programming Feature Buttons”... - Page 43 To change Feature Button Labels on the SoftIPT Setup 1. Click the 2. From the Softphone Setting window (shown right), type in button labels (eight characters max.), click OK. Strata CIX and CTX IPT/DKT Telephone icon (wrench). 11/05 The Basics Basic SoftIPT Functions...
- Page 44 The Basics Basic SoftIPT Functions Strata CIX and CTX IPT/DKT Telephone 11/05...
-
Page 45: Using Your Lcd
Using Your LCD If your telephone has an LCD, use this section to learn more about its functions. In its idle state, the LCD is a desk clock and calendar. When you are on an outside call, the call duration displays. -
Page 46: Soft Keys
Soft Key Prompts Soft Key Definition Activates Automatic Busy Redial after dialing a busy outside telephone number. Activates Automatic Callback after reaching a busy station, CO line, or CO Line group. BUSY (Busy Override) Sends a call-waiting tone to a busy station. -
Page 47: Soft Key Example
Soft Key (press RTRN return to the original caller without making a conference. Until the call is answered, you see the screen shown right. Strata CIX and CTX IPT/DKT Telephone Soft Key Prompts LCD Control Buttons/Soft Keys (press ) enables you to... - Page 48 = drop the second party and return to a RTRN two-way conversation with the original party. = exit the call and transfer TRNS = create a JOIN TALK WITH TRNS JOIN RTRN (Mode) (Page) (Scroll) Strata CIX and CTX IPT/DKT Telephone 8117 (Feature) 11/05...
-
Page 49: Advisory Messages
Advisory messaging enables you to store an informative message for LCD telephones that call your telephone. The messages can be up to 16 characters long. The Strata system provides a number of stored messages, shown in the table below. Message numbers 5~9 can be defined by your System Administrator. -
Page 50: Account Code Calls
1. Place a call in the normal method. If the call requires an Account Code, a burst of tone (Success Tone) is heard after dialing the telephone number alerting you to enter the Account Code. 2. Enter the account number. -
Page 51: Voluntary Account Codes (Verified/Non-Verified)
3. Enter the account code digits. The prompt disappears upon entry of the first account code digit. After the account code is entered, the connection is restored and the LCD shows the time. Strata CIX and CTX IPT/DKT Telephone Account Code Cnf/Trn . -
Page 52: Alarm Clock
Appendix C – FeatureFlex • The clock follows your Voice Mail clock. • The telephone will not ring at the alarm setting if the phone is not idle and it has been programmed to Call Forward. To set an alarm clock notification 1. -
Page 53: Alarm Notification Button
The LED flashes red. You hear confirmation tone. 2. Hang up or press seconds (depending on system programming). Your telephone receives ring tone when Automatic Busy Redial dials the number and it is available. The extension and Spkr LEDs flash green. -
Page 54: Automatic Callback
2. Hang up. You can make other calls while waiting. 3. When the called station or outside line becomes idle, your telephone rings with a fast LED. • If you called a busy station, the extension LED flashes green (incoming call) and the called number displays. -
Page 55: Background Music
Background Music You can set background music over your telephone speaker or over external speakers. Up to 16 different music sources can be applied to the Strata CIX/CTX system: the first source is Quiet Tone, all others can be music or recorded information. -
Page 56: Call Forward
Station Station Call Forward enables you to assign Call Forward destinations for each extension on your telephone that will override the telephone’s System CF settings. Each extension can be independently set Station Call Forward to a unique destination. You can set a Flexible Button to perform any Call Forward function - see “Programming Feature Buttons”... -
Page 57: Station Call Forward Categories
Notes • Call Forward Any Call and CF-Incoming line can be set simultaneously on a telephone. This allows incoming lines calls to be forwarded to a different destination than all of the other types of calls. • Call Forward destinations can be to internal destinations and outside telephone numbers. -
Page 58: Station Call Forward Procedures
Follow the instructions in the following table, shown under “Button Sequence.” Some features require additional input, such as: • Dest. Ext. or Telephone No. – CF destination numbers can be internal extension numbers or outside telephone numbers. If the destination is an... -
Page 59: Call Forward Examples
Call Forward Examples To set your telephone to CF Busy-No Answer to an internal extension number Press your extension button + #6041 = Call Forward Access Code sequence 3000# = Internal Extension Number = Ring time in seconds before Call Forwards... - Page 60 Call Forward Any Call - Set for Another Station: Enables you to set call forwarding for another telephone within your telephone system. You will need the other telephone’s CF pass code in order to do this. CF Pass Codes are created in system programming.
- Page 61 Press ext. button + Cancel enter other telephone’s CF pass code + Strata CIX and CTX IPT/DKT Telephone #6022 (tone) + dial the other telephone’s ext. no. + (tone) #6032 (tone) + dial the other telephone’s ext. no. + ) (tone) #6032 (tone) + dial the other telephone’s ext.
- Page 62 Call Forward Procedure (continued) Feature Call Forward - Incoming Line Call - Set for Another Station: Enables you to set forwarding of incoming line calls for another telephone within your telephone system All Calls to an ext. All Calls to outside telephone no.
-
Page 63: Call History
• If your station is busy, the parked call camps on. If you have an LCD telephone, you can let the system automatically select an available orbit number which displays on your LCD. Strata CIX and CTX IPT/DKT Telephone button. - Page 64 1. While on a call, press Cnf/Trn ...or an extension during the call, and you have line button on your telephone, the line LED will flash until the call is picked up (depending on programming). 2. Specify the Park Orbit using one of the following: •...
-
Page 65: Call Pickup
A call ringing this Ext. No. only. Other lines Ext. No. ringing on the same phone are unaffected. Outside Calls Any incoming outside line call. Strata CIX and CTX IPT/DKT Telephone 11/05 Advanced Operation Call Pickup Press Ext. Button, then dial... - Page 66 By convention, the Primary extension number is assigned to the first button on a multi-button telephone. • If more than one call is on hold, the call on the telephone’s lowest button number is picked up. • Ringing calls are picked up over held calls as a priority.
-
Page 67: Screen Call
• To see how this feature interacts with other FeatureFlex features, refer to Appendix C – FeatureFlex • If you do not enter any telephone numbers in the list, then Screen Call permits your voice mail to examine calls that are intended for your telephone, and handle them based on the Caller’s Name. -
Page 68: Call Waiting
You must disconnect or transfer the existing call to answer the waiting call. To answer a waiting call by placing the current call on hold... -
Page 69: Direct Inward System Access (Disa)
Inward System Access (DISA) and dial an extension or outgoing line without going through an attendant or operator. See your System Administrator for details. 1. From outside the system, dial the public telephone number assigned to DISA. The call will be answered and you will hear system dial tone. -
Page 70: Distinctive Ringing
860/1180 Hz 0.5 sec. On, 1300/1780 Hz 1 sec. Off, repeat to enter User Programming Mode. or extension button. The LED is steady green. Hold to switch between internal and external pitch. (Internal = Line or extension). Two beeps is Strata CIX and CTX IPT/DKT Telephone 11/05... -
Page 71: Do Not Disturb
You can start dialing at any time during either tone. If you put your Primary extension into DND mode, all calls to that telephone are rejected. If your extension is set for Call Forward-Busy or Call Forward-Busy/No Answer, the call is redirected to the forwarding destination immediately. -
Page 72: Setting Dnd For Another Extension
Enter (hear Entry Tone) + new pass code + If you activate DND while a call is ringing, the ringing stops. The LED continues to flash on your telephone and ring on other appearances. Door Lock(s) Your telephone may have programmed to unlock a specific door. -
Page 73: Door Phone(S)
When you hear a door phone call ringing, lift the handset or press the ringing button. A door phone call sounds like chimes (high/low). The extension LED flashes green (in-use) and you are connected to the door phone..or to pick up door phone calls ringing someone else’s telephone, press your #5#5 extension +... -
Page 74: Echo Cancellation
Emergency Monitoring Station Your system may have one digital telephone assigned as an emergency monitoring station. If your telephone has this assignment, your line LED will flash green when someone makes a participate in the conversation. See your System Administrator for more information on this feature. -
Page 75: Emergency Ringdown
When the feature is ON, the Microphn Cut-off LED lights steady red and the Mic and Spkr LEDs do not light when your telephone is called. When the feature is OFF, the Microphn Cut-off LED is not lit and your microphone Microphn Cut-off works. -
Page 76: Off-Hook Call Announce
Your telephone must be programmed to either announce automatically or to announce after you press a button on your dial pad. The destination telephone must be programmed to accept an OCA. The announcement may be delivered over the handset or the speaker. -
Page 77: Override Calls
Do Not Disturb (DND) Override lets you send a call waiting tone or ringing to a station in DND mode to indicate that a call is coming in. Your telephone may be programmed to block DND Override from other telephones. Your station’s LCD shows the station you have called is in the DND mode. -
Page 78: Executive Override
Advanced Operation Override Calls Executive Override Executive Override enables you to enter an established conversation. Your telephone can also be programmed to block Executive Override from other telephones. To perform Executive Override After reaching a busy station, press ...or, if you have an LCD telephone, use the You enter a conference with the busy station and the party to whom he was talking. -
Page 79: Class Of Service Override
This feature enables you to enter an established call on a line you share with another telephone. Up to two station users can enter an existing CO line-to-station call (i.e., up to three stations can be connected to a CO line). You can also use this feature if the station that is already connected to the CO line is in the Privacy Release mode. -
Page 80: Answering A Page
2. Enter the Page Zone Number (01~08, depending on your telephone system). Emergency Page An Emergency Page overrides Group Pages or All Call Pages to telephone and external paging devices. To make an Emergency Page, lift the handset off-hook, dial To make an Emergency Page to a group, lift the handset off-hook, dial enter the Group number. -
Page 81: Privacy
Lines and outside Line Group buttons. The application of Privacy to individual telephones is controlled in system programming. By default, the system is private. If you are in a conversation, another telephone with an appearance of the line on which you are talking cannot intrude unless that telephone has been programmed for Privacy Override. -
Page 82: Speed Dial
• Station SD – Your System Administrator allocates a block of up to 100 personal SD numbers (10 per telephone). You have exclusive use of them and you can create and change them from your own telephone.If you have a IPT3014 telephone,... -
Page 83: Accessing System Sd And Personal Sd Directories
3. Dial the telephone number to be stored + codes. The LCD shows “SPEED DIAL” + the Speed Dial Number + destination + #. You hear Success Tone. 4. Release the telephone. To enter another number, repeat the process, starting with Step 1. Refer to Table 6... -
Page 84: Advanced Speed Dial Operation
101 but, if you do, Number 100 will be shortened to 32 digits. and Pause. For an example on how to use special 115. ” functions as an escape key indicating that the number immediately Strata CIX and CTX IPT/DKT Telephone 108). is used as an escape to insert a seven-second . -
Page 85: Tone/Pulse Dialing
2. Dial a telephone number. 3. While on the call, press programmed for rotary dial pulses, access the outside line and dial the telephone number like any other call described in this user guide. The Tone LED lights steady red and you are able to send touchtones with your dial pad. -
Page 86: Uniform Call Distribution
• Logout - Key is Off The Login/Logout feature is applied to the call which terminates to UCD pilot only. Therefore, the call can terminate to agent Prime or Phantom PDN directly even if the Strata CIX and CTX IPT/DKT Telephone 11/05... - Page 87 #6061 #6062 #6161 #6162 where DN = the Directory number of the agent station. Strata CIX and CTX IPT/DKT Telephone Feature Login - from Agent Station Logout - from Agent Station Login - Agent Station (DN) from another station Logout — Agent Station (DN) from another station...
-
Page 88: Voice Mail Call Monitor
The LCD display indicates the extension or line connection. Appendix C – FeatureFlex Interactions. Call Monitor button on your telephone, you can listen to a caller button to disable Call Monitor. The Call Monitor LED Strata CIX and CTX IPT/DKT Telephone 11/05... -
Page 89: Voice Mail - Direct Transfer
4. Talk or leave a message for the caller, then Hang up. The Voice Mail takes you back to where you stopped. 5. If you decide to hang up, press Strata CIX and CTX IPT/DKT Telephone Cnf/Trn . You hear feature dial tone. -
Page 90: Voice Mail Soft Keys
Voice Mail Soft Keys This section provides simple definitions of the Stratagy ES (including the Stratagy iES32) Voice Mail Soft Keys. Once your telephone is connected to your Stratagy ES voice mailbox, the LCD displays the Stratagy ES Main Menu options shown in below. - Page 91 DATE & TIME DATE DELAY TIME DELETE DELETE MBX DELETE MSG DESTINATION DIRECTORY Strata CIX and CTX IPT/DKT Telephone Voice Mail Functions Copy All Messages Append recording Set Automatic Msg Copy Backup (rewind) Record Busy Greeting Select Busy Greeting (toggle)
- Page 92 NAME Record your Name NEXT Play next message Play next message (Future Delivery Review) NEXT Play next name PAUS Pause recording Pause playback LIST Manage Personal Distribution Lists LIST Personal distribution list (1~25) Strata CIX and CTX IPT/DKT Telephone 11/05...
- Page 93 SET DAY SET HOUR SET MINUTES SET MONTH SET YEAR SPCL FUNCT SPCL Strata CIX and CTX IPT/DKT Telephone Voice Mail Functions Play the Previous message Return to previous menu Record a list Comment Record Re-enter automatic copy destination Re-enter name or Exit...
- Page 94 Send All Fax (in folder to fax dev) FAX1 Send Current Fax (to fax device) SPCL Special Delivery Options Set copy Start Time STOP End recording Copy Urgent Messages OPTN Change User Options Resume playback Strata CIX and CTX IPT/DKT Telephone 11/05...
-
Page 95: Call Recording
Ask your System Administrator which method to use when recording a call. Note This feature requires the presence of a button on your telephone. Feature codes are not available. Important! Stratagy ES mailboxes have a definable time limit on the length of a message can be. -
Page 96: Other Voice Mail Features
Step 1. Notes The following notes apply to telephone systems that are networked. For instance, if your company is so large that some departments are connected to one system (node) and others are on another (either in the same building or in another city), the telephones on the other node are considered “remote”... - Page 97 IPT2008-SDL LCD Features This chapter shows how to use the IPT2008-SDL (shown below) large screen display. Soft Keys Handset Dial Pad IPT2008-SDL Telephone Strata CIX and CTX IPT/DKT Telephone 7535 11/05 LCD Display Soft Keys (SK) LCD Control Buttons/Soft Keys...
-
Page 98: Chapter 4 - Ipt2008-Sdl Lcd Features Buttons
The IPT2008-SDL telephone is unique in functionality and design. This chapter describes its design elements and shows you how this telephone functions. Buttons This telephone has Fixed buttons, Navigation buttons, eight flexible buttons and 16 soft key buttons. Fixed Buttons The fixed buttons on your dial pad enable you to perform standard functions quickly and easily. -
Page 99: Idle Display
• Icon – The icon changes according to the Call status • Soft keys display (see • Text information (example: Calling from.) • Tabs (see Left and Right Tab Soft Keys Strata CIX and CTX IPT/DKT Telephone “Directory and Speed Dial “Soft Keys” on page below) 11/05... -
Page 100: Left And Right Tab Soft Keys
Going Off-hook/pressing Speaker Phone Tab – Talk display 7541 Making an Out-going call 7538 Configuration display Strata CIX and CTX IPT/DKT Telephone 7539 7542 11/05... -
Page 101: Directory And Speed Dial Listings
3. To select someone from the list, press the Soft Key next to their name. Press the Talk soft key. The system calls that number. Strata CIX and CTX IPT/DKT Telephone Soft Key to view MAR 18 BOB T DON U... -
Page 102: System Speed Dial And Personal Speed Dial
SYSTEM SD PERSONAL SD MORE Soft Key; press for instructions on entering letters, numbers and punctuation EXTERNAL 92) and pressing the Strata CIX and CTX IPT/DKT Telephone to view the first screen. PREVIOUS to page INPUT THE NAME? EXIT FIND... -
Page 103: Storing Personal Speed Dial Names
Soft Keys, that can be used for dialing with the Personal SD directory on the IPT2008- SDL telephone. Speed Dial bins (locations) must be assigned to your IPT2008-SDL telephone Note by your System Administrator before you can store names. Your System Administrator can also associate names with Station Speed Dial numbers. - Page 104 . The Speed Dial name is now programmed. Example: Press the for “A.” Press the again for “B,” etc. Refer to the table for other characters. 5859 Soft Key. Look for the Personal SD Strata CIX and CTX IPT/DKT Telephone 11/05...
-
Page 105: Web Access
For example, to type www as in world wide web, use w 9. Enter the web address, press Enter, the cursor disappears. 10.Use the to click OK, then press the OK soft key. Strata CIX and CTX IPT/DKT Telephone “IPT2008-SDL Web “IPT2008-SDL Web Application Icons” on page 11/05... - Page 106 Press 0 for all punctuation marks Press # to toggle between Alpha and Numeric modes Press to enter a period. Dial Pad Alphanumeric Characters < ‘ Strata CIX and CTX IPT/DKT Telephone 7582 Reload Stop goto a goto d goto g...
-
Page 107: Info Manager
Info Manager These applications can be used with the IPT2008-SDL telephone or a PC with a web browser. Info Manager Administration details can be found in the Strata CIX Programming Manual, Volume 3 – Application and Implementation. To Login 1. Follow the steps 2. -
Page 108: Stocks
From the Options screen, press the Stocks soft key to view a list of stock quotes. To add or remove stock quotes, see Note “Adding and Removing Stock Quotes, Company News and Weather” on page 100. Strata CIX and CTX IPT/DKT Telephone 11/05... -
Page 109: Weather
The weather for that city displays (shown below). To add or remove Weather, see Note and Removing Stock Quotes, Company News and Weather” on page Strata CIX and CTX IPT/DKT Telephone “Adding 100. 11/05 IPT2008-SDL LCD Features Info Manager... -
Page 110: News
3. Press the next or back soft keys to view other news items. To add or remove News items, see Note “Adding and Removing Stock Quotes, Company News and Weather” on page 100. Strata CIX and CTX IPT/DKT Telephone 11/05... -
Page 111: Calendar
Cache. Check Cache for the database to remember your Username and Password. Note 5. Select the Login softkey on the right. Your meetings screen displays (shown below). Strata CIX and CTX IPT/DKT Telephone 11/05 IPT2008-SDL LCD Features Info Manager... - Page 112 For details on an item, select the corresponding softkey next to the date on the meeting screen. The Meeting details display (shown below right). Meetings Screen For the Telephone to notify you of a Meeting 1. Select the softkey next to the meeting time on the Meetings screen. The Meeting Notification screen displays (shown right).
-
Page 113: Cycle
Auto cycle screen shown above. • Content – By pressing the Content soft key, you can access Stock Quotes, News and Weather. Strata CIX and CTX IPT/DKT Telephone 11/05 IPT2008-SDL LCD Features Info Manager... - Page 114 2. Select the appropriate softkey to add or remove a stock quote. Stock Quote When you select the add or remove buttons in the above screen, the following screens display depending on the selection. Add Stock Quote Remove Stock Quote Strata CIX and CTX IPT/DKT Telephone 11/05...
- Page 115 3. Press Enter (Oval Navigation center button). 4. Press the navigation 5. Use the navigation Strata CIX and CTX IPT/DKT Telephone arrow button to select the month. arrow button to move to the Day/Year. arrow button to select the day/year.
- Page 116 2. Press the Content soft key. The first screen is Stock Quote. 3. Press the next soft key. The Add/Remove Company News and Weather screen displays. 4. Press the corresponding Add or Remove softkey. Strata CIX and CTX IPT/DKT Telephone 11/05...
- Page 117 8. Press the Enter button on the selection. 9. Press the Add soft key to add the city for the weather you want displayed (shown right). Strata CIX and CTX IPT/DKT Telephone 11/05 IPT2008-SDL LCD Features Info Manager...
- Page 118 3. Press the next soft key. 4. Press the remove soft key. 5. Select the city or location by using the navigational buttons. 6. Press the Enter button on the selection. 7. Press the Remove soft key. Strata CIX and CTX IPT/DKT Telephone 11/05...
-
Page 119: Chapter 5 - Dkt3014/3214-Sdl Lcd Features
DKT3014/3214-SDL LCD Features This chapter shows how to use the DKT3214-SDL (shown below) large screen directory display and individual name searches. 5908 DKT3214-SDL Telephone Strata CIX and CTX IPT/DKT Telephone FRED S NO. 3371 FEB 19 MONDAY 12:00 DIRECT SS... -
Page 120: Directory And Speed Dial Listings
Soft Key to view PREVIOUS NO. 3371 MONDAY 12:00 5860 FRED J NO. 3371 MAR 18 MONDAY BOB T DON U CAROL F FRED M CUST SERV GRAY W PREVIOUS EXIT CALLING 3200 Strata CIX and CTX IPT/DKT Telephone 01:35 MORE 11/05... -
Page 121: System Speed Dial And Personal Speed Dial
Soft Key to view the first screen. 2. Begin by entering the name (see Table 11 on page FIND Soft Key. Strata CIX and CTX IPT/DKT Telephone SYSTEM SD PERSONAL SD MORE Soft Key; press for instructions on entering letters, numbers and punctuation... -
Page 122: Storing Personal Speed Dial Names
Soft Keys, that can be used for dialing with the Personal SD directory on the IPT2008- SDL telephone. Speed Dial bins (locations) must be assigned to your IPT2008-SDL telephone Note by your System Administrator before you can store names. Your System Administrator can also associate names with Station Speed Dial numbers. - Page 123 7. Go off hook. The IPT exits User Programming Mode. 8. Test the Personal SD entry by pressing the name in the entry and press the Soft Key associated with that name. Strata CIX and CTX IPT/DKT Telephone 5859 11).
- Page 124 DKT3014/3214-SDL LCD Features Directory and Speed Dial Listings Strata CIX and CTX IPT/DKT Telephone 11/05...
-
Page 125: Chapter 6 - User Programming
User Programming enables users to customize these features: • Flexible Buttons – Toshiba telephones have 10, 14, or 20 Flexible Buttons to which the user can assign any one of approximately 50 different features (DND, ACB, Release, etc.). -
Page 126: User Programming Mode
One Touch buttons. • Background Music – Users can select Quiet Tone or the music source (up to 15) that will play on their telephone’s speaker when they activate the button. Directory number and external line buttons cannot be added or deleted, but their Note ring tones can be individually changed. -
Page 127: Setting/Changing A Flexible Button's Function
On hold - Remote Retrieve On hold - Outside Line Retrieve On hold - Directed Extension Retrieve On hold and Incoming Incoming - Any External Call Strata CIX and CTX IPT/DKT Telephone Table 12), plus any optional parameters. Code Feature... -
Page 128: One Touch Buttons
One Touch buttons can be used for storing frequently used features or dialed numbers, such as Speed Dial numbers (use Speed Dial Codes to store additional numbers). One- touch buttons can be preassigned to your telephone – your System Administrator can help you identify them. -
Page 129: To Use A One Touch Button
Press the One Touch button. Setting/Changing a Personal Speed Dial Code “Storing a System/Station Speed Dial Number” on page Strata CIX and CTX IPT/DKT Telephone . The display of a pause in the Speed Dial Number shows a “P” 11/05... -
Page 130: Feature Codes
User Programming Feature Codes Feature Codes Feature Access Codes are entered as a sequence on your telephone to use a particular feature. For an example of Call Forward, see Table 14 Feature Access Codes Feature Account Code (while on a call) - Page 131 Flash - Long LCD Language (Change) LCR (Outgoing Call) Message Waiting (MW) Manually turn off MW LED Strata CIX and CTX IPT/DKT Telephone Feature Access Code Sequences #5#36 Ext. button + #5#5 + Ext. No. of another phone being paged.
- Page 132 #38 + Group Number Ext. button + Ext. button + #5#36 + Page Zone No. (01~08) Ext. button + Ext. butt Strata CIX and CTX IPT/DKT Telephone + Message No. (see 35). Hang up. . Hang up. , or , depending on...
- Page 133 Program 200-30 (System SD) and Program 200-35 (Station SD). 3. Refer to Table 7 on page 70 4. If your telephone does not have a Spdial button, press the Dial bin number (nnn). Strata CIX and CTX IPT/DKT Telephone Feature Access Code Sequences #66 + nnn + Phone No.
-
Page 134: Led Indicator Details
1 second at 10 pulses/second Your extension button flashes 10 pulses/second–1 second 4 pulses/second, 1/8 second On/Off 10 pulses/second 10 pulses/second Strata CIX and CTX IPT/DKT Telephone Other Station (Red) steady one second On/Off 1/2 second On/Off steady steady flashes... -
Page 135: Chapter 7 - Adm/Dss Console
• IP Add-on Module (IADM) – adds 20 line/feature buttons to the IPTs. Up to two IADMs can be connected to an IPT. • IP Direct Station Selection (IDSS) Console – operates alongside an IP telephone and has 60 line/feature buttons. Up to three consoles can operate with one IP telephone. -
Page 136: Adm
These flexible feature buttons can be assigned as CO line, Directory Number, DSS, One Touch Speed Dial or any other flexible feature. Up to two DADMs can be attached to a telephone to provide 40 buttons to supplement the telephone's 10 or 20 buttons. -
Page 137: Dss Console
DSS buttons can appear on both the ADM and DSS Console. Each DSS button is associated with a particular station in your telephone system. DSS buttons can transfer an outside call to the associated station or make a direct call to the associated station. -
Page 138: Calling A Station
A station call with a DSS button can be made on-hook or off-hook, and with Voice First or Tone signaling. After pressing the button, treat the call like any other station call made from a digital telephone. DSS LEDs indicate whether the associated station is idle or busy. The LED is steady red if the station is busy or ringing, and is not lit if idle. -
Page 139: Call Transfer With Camp-On
Line flashing Speed Dial Your DADM or DSS console may be equipped with be programmed to dial telephone numbers or to access features. the DADM or DSS console function like Strata CIX and CTX IPT/DKT Telephone Line buttons on digital telephones. -
Page 140: Paging
“All Call Page” on page Call Forward Override (DSS Override) Either the DSS buttons on your DSS console or the associated telephone can be set in system programming to ring stations that are in the Call Forward mode, instead of being forwarded. -
Page 141: Appendix A - Centrex Application
Centrex Feature Buttons You can access some Centrex features by pressing a pre-programmed Flexible Button on your telephone, instead of dialing a Centrex access code. The Centrex access code, including the necessary flash and/or pause sequence, is activated when the button is pressed. -
Page 142: Delayed Ringing
Delayed Ringing Delayed Ringing Outside line or Centrex line(s) can be programmed for a 12-second and/or 24-second ring delay at stations to permit alternate answering conditions. Answer the line when your telephone is ringing. Strata CIX and CTX IPT/DKT Telephone 11/05... -
Page 143: Appendix B - Button Labels
Button Labels All Flexible Buttons must be programmed for your telephone in system programming and vary for individual telephones. If a button does not appear on your display or telephone keystrip label, see your System Administrator for button assignments. The button labels in Programmable buttons are the unmarked buttons on your keystrip. - Page 144 Park — Press to park internal or outside calls in an orbit. Call retrieval can be made Orbit locally from the same parking telephone or remotely from a different telephone. Pooled Line Pooled Line — Press to access an available outside line from a group of lines appearing under one button.
- Page 145 SD or Speed Dial — Press to Speed Dial a telephone number or feature access codes. SD Customized buttons can be used as either System Speed Dial numbers or Station Speed Dial Button numbers.
- Page 146 Button Labels Delayed Ringing Strata CIX and CTX IPT/DKT Telephone 11/05...
-
Page 147: Appendix C - Featureflex Interactions
One Number Access Phantom DN Conference/Transfer Multiple Appearances All Call Forwarding Busy Forwarding Strata CIX and CTX IPT/DKT Telephone Alarm Screen Call Call Return Clock See Note 1 No FeatureFlex features can be assigned to a Phantom DN. See Note 2 See Note 4. - Page 148 4. If a call is forwarded to a phone that has Call Screening or ONA turned on, and that phone is itself forwarded to another phone, then the FeatureFlex feature will not turn Strata CIX and CTX IPT/DKT Telephone 11/05...
-
Page 149: Index
113, callback, callback cancel, 113, hold, line selection, automatic busy redial, Strata CIX and CTX IPT/DKT Telephone automatic hold, background music (BGM), 41, 113, busy override, button labels, programming, buttons 3200-series LCD, 4,... - Page 150 88, feature access codes, FeatureFlex, 38, 53, flash, 113, flexible buttons, 3, codes, flexible directory numbering, forced account codes (verified/non- verified), Strata CIX and CTX IPT/DKT Telephone consoles, 11/05...
- Page 151 ISDN buttons, 71, join, language changes, language code, (large screen), 3200-series buttons, 4, contrast, LCD control buttons, Strata CIX and CTX IPT/DKT Telephone dialing out, LED indicators, line access, automatic selection, buttons, ringing preference, line button, 11, making a call,...
- Page 152 (Line1~Line6), 2000-phone location, 3200-phone location, DKT3014 LCD, 69, 87, 88, 106, left and right tab, Stratagy voice mail, access codes, 68, 69, 113, names, 89, personal, 69, 88, 107, system, 69, 88, answering, Strata CIX and CTX IPT/DKT Telephone 11/05...
- Page 153 111, 113, voice first signaling, voice mail access codes, call record, conference, direct transfer, volume control, 119, voluntary account codes (verified/non- verified), accessing the web, alphanumeric dial pad, application Icons, Strata CIX and CTX IPT/DKT Telephone 11/05 Index U ~ W...