Removing The Multi-Purpose Tray Separation Pad - Canon imageRUNNER ADVANCE 4551i Service Manual

Hide thumbs Also See for imageRUNNER ADVANCE 4551i:

Table of Contents

3. Free the claw [1], slide the Shaft Support (Front) [2], and remove the Multi-purpose Tray Pickup Roller [3].

When installing it, be sure to follow the order shown below.

1. Fit the hole of the Multi-purpose Tray Pickup Roller [1] onto the protrusion of the Shaft Support (Rear) [2].

2. Attach the Shaft Support (Front) [4] while pushing down the Separation Pad [3].

3. Attach the Shaft Support (Rear) [2] to the Multi-purpose Tray Pickup Roller [1].

When the consumable parts have been replaced, be sure to clear the parts counter shown below in service mode.

• COPIER > COUNTER > DRBL-1 > M-FD-RL

Removing the Multi-purpose Tray Separation Pad

■ Preparation

Do not touch the surface of the Separation Pad during the work.

1. Remove the Multi-purpose Tray Pickup

Roller."Removing the Multi-purpose Tray Pickup Roller" on page 281

4. Disassembly/Assembly