Canon imageRUNNER ADVANCE 4551i Service Manual page 767
Hide thumbs
Also See for imageRUNNER ADVANCE 4551i:
- Faq manual (44 pages) ,
- User's manual (notification of new and enhanced functions (40 pages)
Table of Contents
Advertisement
COPIER > OPTION > IMG-MCON
SHARP
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
VP-ART
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
VP-TXT
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
C-PDL-T
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
Setting of sharpness level of image
To set the setting level (center value) of sharpness of image.
As the value is increased, the image tends to be sharp, and as the value is decreased, image tends
to be soft.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
1 to 5
3
Setting of line art processing
To set outline processing for line art on scalable PDF.
In the outline processing, a binary image outline is extracted in the field which is recognized as
line art, and is converted into vector data.
Specify whether to convert the binary image outline into vector data or to recognize it as one line
(as a thin line). For the thin line, the line width can be specified.
Change this value when you want to obtain an output of a wide-width line as one line rather than
as an outline (when you want to prioritize edit operation as a line rather than image quality).
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 99
1
Setting of character vectorization
To set vector conversion processing for text on scalable PDF.
In the vector conversion processing, a binary image outline is extracted in the field which is
recognized as text, and is converted into vector data.
In regular vector conversion, function approximation is not used for small text because the image
quality is not changed.
When the value is changed, function approximation processing is executed for small text, which
realizes smooth text although the image quality is changed.
Change this value when you want to prioritize smoothness in small text.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 99
1
Setting of PDL gradation reference
To set whether gradation or density to be prioritized as the gradation reference for PDL.
With priority on gradation (% of halftone dots), gradation is matched with original on the shadow
area although the maximum density decreases. With priority on density, density is always matched
with original.
Upon user's request
Enter the setting value, and then press OK key.
0 to 1
0: Priority on gradation (% of halftone dots), 1: Priority on density
0
Abbreviation of CAL_PDL_Target
754
8. Service Mode
Advertisement
Table of Contents
Troubleshooting
