Sony RDR-GX360 Operating Instructions Manual page 19
Dvd players & recorders: single tray dvd recorder
Hide thumbs
Also See for RDR-GX360:
- Quick start manual (2 pages) ,
- Specification sheet (2 pages) ,
- Service manual (85 pages)
Table of Contents
Advertisement
A Connecting to audio L/R jacks
This connection uses a stereo amplifier's
(receiver's) two front speakers for sound.
You can enjoy the surround function that creates
virtual speakers from two stereo speakers. Select
"Surround1," "Surround2," or "Surround3" in
"Surround" of the "Audio" setup (page 83).
Surround 1
Surround 2
Surround 3
Virtual speaker
Note
Make sure that your listening position is between and at
an equal distance from your speakers, and that the
speakers are located in similar surroundings.
B Connecting to a digital audio input jack
Use this connection if your AV amplifier
*1
(receiver) has a Dolby
and a digital input jack. You can enjoy the
surround effect of Dolby Digital (5.1ch) or DTS
(5.1ch).
After you have completed the connection, make
the appropriate settings under the "Audio" setup
(page 82). Otherwise, no sound or a loud noise
will come from your speakers.
*1
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of
Dolby Laboratories.
*2
Manufactured under license under U.S. Patent #:
5,451,942 & other U.S. and worldwide patents issued
& pending. DTS and DTS Digital Out are registered
trademarks and the DTS logos and Symbol are
trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All
Rights Reserved.
z Hints
• For correct speaker location, see the operating
instructions supplied with the connected components.
• With a coaxial digital connection, you cannot:
– use the virtual surround effects of this recorder.
– switch the bilingual sounds on a DVD-RW/DVD-R
(VR mode) by pressing AUDIO when you set "Dolby
Digital" to "Dolby Digital" in the "Audio" setup
(page 82).
*2
Digital or DTS
decoder
19
US
Hide quick links:
Advertisement
Chapters
Table of Contents
