Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly
maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE
AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1.
SAFETY INSTRUCTIONS
WARNING! Ensure Health and Safety, local authority and
general workshop practice regulations are adhered to when
using tools.
DO NOT use tools if damaged.
Maintain tools in good and clean condition for best and safest
performance.
Ensure that a vehicle which has been jacked up is adequately
supported with axle stands.
Wear approved eye protection. A full range of personal safety
equipment is available from your Sealey dealer.
Wear suitable clothing to avoid snagging. DO NOT wear
jewellery and tie back long hair.
DO NOT attempt to start engine or move vehicle whilst in gear
with locking devices fitted.
Always display warning notification on steering wheel when
locking engine components.
Account for all tools, locking bolts, pins and parts being used
and do not leave them in or near the engine.
WARNING! Incorrect or out of phase camshaft timing can result
in contact between valve head and piston crown causing
damage to the engine.
IMPORTANT: These instructions are provided as a guide only
Always refer to the vehicle manufacturer's service instructions,
or a proprietary manual, to establish the current procedure and
data.
2.
CONTENTS & APPLICATIONS
Applications:
BMW N40 and N45(T) Twin Camshaft Petrol engines in
BMW
1 Series
116i. E81/E87
3 Series
316i. E46/E90
316Ci. E46
316ti. E46
B16 (N40/N45/N45T) engines
INSTruCTIONS FOr:
PETROL ENGINE TWIN CAMSHAFT
SETTING / LOCKING TOOL KIT-
BMW 1.6
VS4870
MODEL No:
1
Kit contents/spares
Item
Part Number
Description
1
VS4801
Flywheel Locking Pin
VS4868 Camshaft Setting Plate Assembly (items 2 to 4)
2
VS4868-1
Camshaft Setting Plate (Inlet)
3
VS4868-2
Camshaft Setting Plate (Exhaust)
4
VS4805-3
Camshaft Setting Plate Securing Screw
5
VS4803
Timing Chain Tensioner Pre-Load Tool
6
VS4869
VANOS Alignment Plate
--
VS4870-84
Case + Insert
2
3
4
5
6
VS4870
Issue No: 1 - 07/04/09
Advertisement
Related Manuals for Sealey VS4870
Summary of Contents for Sealey VS4870
- Page 1 VS4870 MODEL No: Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.
- Page 2 The N40 was introduced in the BMW 3 Series (E46) in 2001, followed by the N45 in the 1 Series (2003). The N45T appears in both the 1 Series and 3 Series from 2006. VS4870 Setting/Locking Tool Kit Comprises: VS4801 Flywheel Locking Pin VS4803 Chain Tensioner Pre-Load Tool...
- Page 3 Setting Plate rests fully on the surface of the cylinder head (Do not insert fixing bolt at this stage) (fig.8). fig.13 3.6.2 Screw in the two bolts and tighten to secure VS4869 to the cylinder head. Slacken the VANOS unit bolts half turn and fig.9 re-tighten to finger-tight (fig.13). VS4870 Issue No: 1 - 07/04/09...
- Page 4 “AUS / EX” (fig.20b). Installation 3.8.1 Assemble the unit of the Inlet camshaft, including the sensor gear (front plate), and feed on to the inlet camshaft fitting the chain onto the sprocket. Screw in a new bolt and tighten only so fig.17 there is no play or tilting (finger-tight). VS4870 Issue No: 1 - 07/04/09...
- Page 5 WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim. INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode. Sole U.K. Distributor www.sealey.co.uk 01284 757500 Sealey Group Bury St. Edmunds sales@sealey.co.uk 01284 703534 Suffolk.