White Specks Appear; The Toner Does Not Fix Onto The Paper Well - Canon imageCLASS D550 Basic Operation Manual
Black & white laser multifunction
Hide thumbs
Also See for imageCLASS D550:
- Starter manual (37 pages) ,
- Basic operation manual (164 pages) ,
- Starter manual (29 pages)
Table of Contents
Advertisement
<Cause 4> Unevenness may appear when thin lines are printed.
Change the <Special Mode J> setting to <On> from the operation panel.
e-Manual → Maintenance → Special Mode
* If you use this mode, the following problems may occur.
Solution
• The output is less fine.
• Toner smears even on unnecessary parts.
• Toner consumption increases.
White Specks Appear
Perform one of the following solutions according to the cause.
<Cause 1> Appropriate paper is not being used.
Replace the paper with which can be used with this printer.
Solution
"Paper Requirements" (→P.2-6)
<Cause 2> Damp paper is used.
Replace the paper with new paper in an unopened package.
Solution
"Paper Requirements" (→P.2-6)
<Cause 3> The drum in the toner cartridge is deteriorated.
Replace the toner cartridge with a new one.
Solution
"Replacing the Toner Cartridge" (→P.6-9)
<Cause 4> When you print a document of highly contrasting density, white specks may appear on the outlines of the text or
images.
Change the [Special Print Mode] setting to [Special Settings 2] from the printer driver.
e-Manual → Maintenance → Special Mode
Solution
* When [Special Settings 2] is selected, printing density is lower than when [Off ] or [Special Settings 1] is selected.
Also, text or lines may be less clear.
The Toner Does Not Fix onto the Paper Well
Perform one of the following solutions according to the cause.
7-15
Hide quick links:
Advertisement
Chapters
Table of Contents
