Specifying Values Using The Navigation Keys; Returning To The Default Screen - Canon imageCLASS D550 Basic Operation Manual
Black & white laser multifunction
Hide thumbs
Also See for imageCLASS D550:
- Starter manual (37 pages) ,
- Basic operation manual (164 pages) ,
- Starter manual (29 pages)
Table of Contents
Advertisement
Specifying values using the navigation keys
Specifying values
Situation
When moving through the bars to
adjust levels such as density
When selecting a value to set a
timer
When entering a series of numbers
or letters such as PIN
Confirming the input
To confirm the input:
• Press [OK].
• When <Apply> appears on the display, press [
Returning to the Default Screen
From the menu screen, press [
menu screen and return to the default screen.
1-8
Screen example
Correct Density
-
+
Auto Reset Timer
2
minutes
(0=Off, 1-9)
System Manager PIN
*******
<Apply>
1
2 3 4 5 6 7 8 9 0
<BS>
] or [
] to select <Apply>, and then press [OK].
NOTE
] (Menu) to exit the
If you press [
Procedure
Press [
] or [
] to adjust the level.
Press [
] or [
] to specify the value.
NOTE
Available values
You can specify any value shown in the parentheses at
the bottom of the screen.
Press [
], [
], [
], or [
] to select a number or
character, and then press [OK] to enter the number or
character.
To clear a number or character, select <BS>, and then press
[OK].
] (Menu) before you press [OK]
The specified settings will not be saved.
Hide quick links:
Advertisement
Chapters
Table of Contents
