Related Manuals for Sony VPL CX125 - XGA LCD Projector
Summary of Contents for Sony VPL CX125 - XGA LCD Projector
- Page 1 3-211-166-11 (1) Data Projector Operating Instructions VPL-CX100 VPL-CX120/CX125 VPL-CX150/CX155 © 2007 Sony Corporation...
- Page 2 1 Use the approved Power Cord (3-core WARNING mains lead) / Appliance Connector / Plug with earthing-contacts that conforms to the safety regulations of each country if To reduce the risk of fire or electric applicable. shock, do not expose this apparatus 2 Use the Power Cord (3-core mains lead) / to rain or moisture.
- Page 3 Canadian ICES-003. Be sure to attach the air filter to the unit. For the customers in Europe For the customers in Taiwan only The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japan. The Authorized Representative for EMC...
-
Page 4: Table Of Contents
Table of Contents Precautions ......... 6 Effective Tools for Your Presentation ......31 Notes on Installation and Usage ..7 Controlling the Computer Using a Unsuitable Installation ....7 Presentation Tool, RM-PJPK1 Usage in High Altitude ....8 (not supplied) (When Using the Unsuitable Conditions .... -
Page 5: Table Of Contents
“Side Shot” (VPL-CX125/CX155 only) and “V Keystone” Adjustments ..62 Dimensions ........64 Index ..........67 Table of Contents... -
Page 6: Precautions
If voltage adaptation is required, consult with qualified Sony Caution personnel. The unit is equipped with ventilation holes •... -
Page 7: Notes On Installation And Usage
Subject to direct cool or warm air Notes on Installation from an air-conditioner and Usage Unsuitable Installation Installing in such a location may cause Do not install the unit in the following malfunction of the unit due to moisture situations. These installations may cause condensation or rise in temperature. -
Page 8: Usage In High Altitude
Usage in High Altitude Unsuitable Conditions When using the unit at an altitude of 1,500 m Do not use the unit under the following or higher, set the “High Altitude Mode” to conditions. “On” in the Installation menu. Failing to set this mode when using the unit at high Do not topple the unit altitudes could have adverse effects, such as... - Page 9 Do not use the Security bar for transporting or installation Use the Security bar at the side of the projector for a purpose of preventing theft, by attaching a commercially available theft prevention cable for example. If you lift the projector by holding the Security bar, or hang the projector by using this bar, it may cause the projector to fall or be damaged.
-
Page 10: About The Supplied Manuals
B Overview This manual contains explanations for the About the Supplied VPL-CX100, VPL-CX120, VPL-CX125, Manuals VPL-CX150 and VPL-CX155 all together. Be aware that the VPL-CX155 is mainly used for explanation of the display, and The following manuals and softwares are there may be an item that is not displayed supplied with the projector. -
Page 11: Features
High brightness Adoption of Sony’s unique optical system Side Shot (VPL-CX125/CX155 only) provides a high-efficiency optical system. It The projector supports the Side Shot feature allows light output of 3500 lumen for the... - Page 12 • VESA is a registered trademark of the Video Electronics Standard Association. • Display Data Channel is a trademark of the Video Electronics Standard Association. • Air Shot is a trademark of Sony corporation. • Side Shot is a trademark of Sony corporation.
-
Page 13: Location And Function Of Controls (Main Unit)
Location and Function of Controls (Main Unit) Top/Front/Side Rear/Side/Bottom N IT O U T A U D P U T IN P ID E V ID V ID A U D R S -2 3 2 C R E M O T E a Lens Note... -
Page 14: Rear Remote Control Detector
d Control panel/Indicator For details, see “Control Panel” on page 15. e Ventilation holes (exhaust) f Adjuster adjustment button For details, see “Using the adjuster” on page 26. g Lamp cover h Ventilation holes (intake) i Adjusters j Rear remote control detector k Connector/Connector Panel For details, see “Connector Panel”... -
Page 15: Control Panel
Control Panel LAMP/ PUSH INPUT KEYSTONE MENU COVER STANDBY ENTER MUTING a LAMP/COVER indicators – Lights in orange when the power saving mode is on. Flashes in orange under the following conditions: For details, see page 50. • A reception rate of 2 flashes when the c ?/1 (On/Standby) key lamp cover or air filter cover is not secured firmly. -
Page 16: Connector Panel
f MENU key h PIC MUTING key Displays the on-screen menu. Press Cuts off the picture. Press again to again to clear the menu. restore the picture. g PUSH ENTER/ (Arrow) keys Used to enter the settings of items in the menu system, select a menu, or make various adjustments. -
Page 17: Remote Commander
AUDIO jack (stereo minijack) Remote Commander To listen to sound output from a computer, connect via this jack to the audio output of the computer. The supplied remote commander differs according to the model. Refer to the relevant d AC IN socket page. -
Page 18: Reset Key
c AIR SHOT key l CONTROL S OUT jack (stereo mini-jack) Displays the Network Presentation Home. This function is not provided in this projector. For details, see Operating Instructions for Network (stored on the CD-ROM). m MUTING keys d APA (Auto Pixel Alignment) key Cut off the picture and sound. -
Page 19: Vpl-Cx100/Cx120/Cx150
To install batteries VPL-CX100/CX120/CX150 The keys that have the same names as those Push and slide the lid to open it, then on the control panel function identically. install the two size AA (R6) batteries (supplied) with the correct polarity. While pressing the lid, slide it. -
Page 20: Menu Key
h PIC MUTING key i D ZOOM (Digital Zoom) +/– key Enlarges the image at a desired location on the screen. j Infrared transmitter k ?/1 (On/Standby) key Face the + side up. (Arrow) keys m ENTER key Put the lithium battery holder back n MENU key into the Remote Commander. -
Page 21: Projecting The Picture
B Projecting the Picture Installing the Projector The distance between the lens and the screen varies depending on the size of the screen. Use the following table as a guide. Screen Distance between the screen and the center of the lens Unit: m (feet) Screen size (inches) -
Page 22: Connecting The Projector
Connecting a Computer Connecting the This section describes how to connect the Projector projector to a computer. For more information, refer to the computer’s instruction manual. When you connect the projector, make sure to: To connect a computer • Turn off all equipment before making any connections. -
Page 23: Connecting A Vcr
• If you set your computer, such as a notebook Connecting a VCR computer, to output the signal to both your computer’s display and the external monitor, This section describes how to connect the the picture of the external monitor may not projector to a VCR. - Page 24 To connect to a video GBR/ Component output connector Side AUDIO AUDIO NETWORK INPUT A INPUT B INPUT C MONITOR AUDIO VIDEO AUDIO RS-232C S VIDEO REMOTE OUTPUT VIDEO IN to audio audio to video output output GBR/ component output A Stereo audio connecting cable (not supplied) (Use a no-resistance cable.) B Signal Cable (not supplied)
-
Page 25: Projecting
Projecting LAMP/ PUSH INPUT KEYSTONE MENU COVER STANDBY ENTER MUTING ON/STANDBY indicator Front remote control detector COMMAND INPUT INPUT INPUT INPUT INPUT INPUT SHOT VIDEO S VIDEO STONE /TILT MENU LENS ENTER AUTO ENTER RESET MENU FOCUS FREEZE RESET D ZOOM VOLUME AUDIO MUTING... - Page 26 To operate with the Control Panel projector by pressing certain keys (e.g., or the Remote Commander of , etc.), or by VPL-CX100/CX120/CX150 changing your computer’s settings. Each time you press the INPUT key, the input signal switches as follows: * VPL-CX125/CX155 only Note To input from Press INPUT...
-
Page 27: Turning Off The Power
automatic keystone adjustment, set the Turning Off the “V Keystone” to “Manual.” (See page 40.) Power • If you set the “V Keystone” to “Auto,” the “V Keystone” correction is automatically adjusted. However, it may Press the ?/1 key. not be perfectly adjusted depending on “POWER OFF? Please press ?/1 key the room temperature or the screen again.”... -
Page 28: Convenient Functions
B Convenient Functions Selecting the Menu Language You can select one of fifteen languages for displaying the menu and other on-screen displays. The factory setting is English. To change the menu language, proceed as follows: ON/STANDBY 4,5,6 indicator LAMP/ PUSH INPUT KEYSTONE MENU... -
Page 29: Security Lock
The selected menu appears. Security Lock The projector is equipped with a security lock function. When you turn the power of the projector on, you are required to input the previously set password. If you do not input the correct password, you will not be able to project the picture. - Page 30 Enter the password on this screen. Note If you call the customer service center because you have forgotten the password, you will need to be able to verify the projector’s serial number and your identity. (This process may differ in other countries/regions.) Once your identity has been confirmed, we will provide you with the password.
-
Page 31: Other Functions
By pressing the + key repeatedly, the Other Functions image size (ratio of enlargement: max. 4 times) increases. Direct Power On/Off Function If you will be using a circuit breaker to turn the power for the entire system on and off, set the direct power on function to “On.”... -
Page 32: Controlling The Computer Using A
Controlling the Computer Using a Presentation Tool, RM-PJPK1 (not supplied) (When Using the Network Presentation Function) (VPL- CX125/CX155 only) When you are using the network presentation function to project the picture from a computer, you can perform some operations for a slide show using a presentation tool (not supplied). -
Page 33: Using A Menu
B Adjustments and Settings Using a Menu Pop-up menu Using a MENU Items that can be set The projector is equipped with an on-screen Status: Picture Language: English menu for making various adjustments and Input-A Signal Sel.: Auto Signal settings. Some of the adjustable/setting Color System: Auto NTSC3.58... - Page 34 To clear the menu Press the MENU key. The menu disappears automatically if a key is not pressed for one minute. To reset items that have been adjusted Select the item that you want to reset, and press the RESET key on the Remote Commander.
-
Page 35: The Picture Menu
The Picture Menu The Picture menu is used for adjusting the picture or volume. Picture Mode: Standard Adjust Picture Standard Picture Picture Adjust Picture Contrast: Brightness: Signal Signal Volume: Sharpness: Gamma Mode: Graphics Function Function Color Temp.: High: Installation Installation Setup Setup Information... -
Page 36: The Signal Menu
The Signal Menu The Signal menu is used to adjust the input signal. Adjust Signal...menu (When the signal is input from a computer) Adjust Signal Adjust Signal Picture Picture Aspect: Full 1 Dot Phase: H Size: 1344 Signal Signal Shift: H: 235 V: 34 Function... -
Page 37: About The Preset Memory No
1328 automatically detects the signal type and Macintosh 21" 1456 recalls the data for the signal from the preset Sony News 1708 memory to adjust it to an optimum picture. PC-9821 1600 The memory number and signal type of that 1280 ×... -
Page 38: The Function Menu
The Function Menu The Function menu is used for changing the settings of the projector. Setting items Functions Initial setting Smart APA The APA (Auto Pixel Alignment) automatically adjusts “Dot Phase,” “H Size” and “Shift” on the Signal menu for the input signal from a computer. •... - Page 39 Setting items Functions Initial setting Power Saving Selects the Power Saving mode. • Lamp off: The lamp goes off if no signal is input for 10 minutes. The lamp lights again when a signal is input or any key is pressed. •...
-
Page 40: The Installation Menu
The Installation Menu The Installation menu is used for changing the settings of the projector. V Keystone: Auto Picture Side Shot: Image Flip: Signal Background: Blue Lamp Mode: Standard Function IR Receiver: Front & Rear ID Mode: Installation Direct Power On: Setup High Altitude Mode: Information... - Page 41 Setting items Functions Initial setting ID Mode Assigns an ID number (1 to 3) to the projector when you (VPL-CX125/ want control two or more projectors individually with the CX155 only) supplied Remote Commander. When this item is set to “1,” you can control the projector with the Remote Commander with the ID MODE key set to “1.”...
-
Page 42: The Setup Menu
The Setup Menu The Setup menu is used for changing the menu displays. Setting items Functions Initial setting Status (on-screen Sets up the on-screen display. display) When set to “Off,” turns off the on-screen displays except for the menus, a message when the power is turned off, and warning messages. -
Page 43: The Information Menu
The Information Menu The Information menu displays the model name, serial number, the horizontal and vertical frequencies of the input signal and the cumulated hours of usage of the lamp. Model name Serial number Memory No. (Memory number of an input signal) Signal type Setting items Functions... -
Page 44: Picture Menu
Input signals and adjustable/setting items Some of the items in the menus cannot be adjusted depending on the input signal as indicated in the following tables. The items that cannot be adjusted are not displayed in the menu. Picture menu Item Input signal Video/S-Video... -
Page 45: Replacing The Lamp
Use of lamps other than the LMP-C200 may cause damage to the projector. Note If the lamp breaks, consult with qualified Sony personnel for replacing the lamp and internal checking. Turn off the projector, and disconnect Loosen the three screws on the lamp the AC power cord from the AC outlet. - Page 46 Select “Lamp Timer Reset”, and then press the ENTER key. Select “Execute” with the key, and then press the ENTER key. The Lamp Timer is initialized to 0, and “Change the Lamp and clean the Filter?” Notes is displayed in the menu screen. •...
-
Page 47: Cleaning The Air Filter
For details on new air filter, consult with Turn the power off and unplug the qualified Sony personnnel. power cord. • Be sure to attach the air filter cover firmly; the power can not be turned on if it is not Remove the air filter cover. -
Page 48: Troubleshooting
B Others Troubleshooting If the projector appears to be operating erratically, try to diagnose and correct the problem using the following instructions. If the problem persists, consult with qualified Sony personnel. Power Symptom Cause and Remedy The power is not turned on. • The power has been turned off and on with the ?/1 key at a short interval. - Page 49 Symptom Cause and Remedy “Please check Input-A The setting of “Input-A Signal Sel.” in the Setup menu is incorrect. c Select “Computer,” “Video GBR” or “Component” correctly Signal Sel.” appears in according to the input signal (see page 42). spite of inputting the correct signal from INPUT A.
- Page 50 • The projector is being used at a high altitude. c Ensure that “High Altitude Mode” in the Installation menu is set to “On.” (see page 41) ON/STANDBY flashes in The fan is broken. c Consult with qualified Sony personnel. red. (Repetition rate of 4 flashes) Troubleshooting...
- Page 51 STANDBY indicator goes out, plug the power cord to the wall flashes) outlet, and then turn the projector on again. If the ON/STANDBY flashes in red and the problem persists, the electrical system has failed. c Consult with qualified Sony personnel. Troubleshooting...
-
Page 52: Messages List
Messages List Warning Messages Use the list below to check the meaning of the messages displayed on the screen. Message Meaning and Remedy High temp.! Lamp off in 1 The internal temperature is too high. min. c Turn off the power. c Check to see that nothing is blocking the ventilation holes. -
Page 53: Specifications
1,024 × 768 dots (RGB input) Specifications Acceptable computer signals fH: 19 to 92 kHz fV: 48 to 92 Hz (Maximum input signal resolution: Optical characteristics SXGA+ 1400 × 1050 Projection system fV: 60 Hz) 3 LCD panels, 1 lens, 3 primary Set the resolution and the frequency of the color shutter system signal of the connected computer within the... -
Page 54: Optional Accessories
NETWORK (VPL-CX125/CX155 Note only) RJ-45: 10BASE-T/100BASE- Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR OUTPUT MONITOR OUT’: HD D-sub 15- DAMAGES OF ANY KIND INCLUDING, BUT pin (female) NOT LIMITED TO, COMPENSATION OR... -
Page 55: Pin Assignment
Pin assignment INPUT A connector (HD D-sub 15-pin, female) R/R-Y N.C. B/B-Y DDC/SDA GND (R) GND (G) DDC/SCL GND (B) INPUT B connector (HD D-sub 15-pin, female) N.C. DDC/SDA GND (R) GND (G) DDC/SCL GND (B) RS-232C connector (D-sub 9 pin, female) RXDA TXDA... -
Page 56: Preset Signals
Preset signals Memory Preset signal fH (kHz) fV (Hz) Sync SIZE Video 60 Hz Video 60 Hz 15.734 59.940 – – Video 50 Hz Video 50 Hz 15.625 50.000 – – 480/60i DTV 480/60i 15.734 59.940 S on G/Y – 575/50i DTV 575/50i 15.625... - Page 57 Memory Preset signal fH (kHz) fV (Hz) Sync SIZE 1152 × 864 VESA 70 63.995 70.019 H-pos, V-pos 1472 VESA 75 67.500 75.000 H-pos, V-pos 1600 VESA 85 77.487 85.057 H-pos, V-pos 1568 1152 × 900 SUN LO 61.795 65.960 H-neg, V-neg 1504 1280 ×...
-
Page 58: Installation Diagram
Installation Diagram Floor Installation (Front Projection) Distance between the front of the cabinet and the center of the lens Front of the Front of the lens Wall cabinet 15.9 ( Center of the screen Center of the lens Floor Unit: mm (inches) This section describes the examples of installing the projector on a desk, etc. - Page 59 Unit: mm (inches) 1170 1770 2380 2990 3590 4500 5410 6020 7540 9050 (117 (141 (177 (213 (237 (297) (356 M 1350 2050 2750 3450 4140 5190 6240 6940 8680 10430 (108 (135 (163 (204 (245 (273 (341 (410 x-237 x-356 x-474 x-593...
-
Page 60: Ceiling Installation (Front Projection)
When installing the projector on the ceiling, use a Projector Suspension Support recommended by Sony. For ceiling installation, ask for qualified Sony personnel. See the chart on page 61 concerning the installation measurements. The alphabetical letters in the illustrations indicate the distances below. - Page 61 Unit: mm (inches) a’ N 1290 1900 2500 3110 3720 4630 5540 6140 7660 9180 (122 (146 (182 (218 (241 (301 (361 M 1470 2170 2870 3560 4260 5310 6360 7050 8800 10540 (113 (140 (167 (209 (250 (277 (346 (415 b+290 b+409...
-
Page 62: And "V Keystone" Adjustments
“Side Shot” (VPL-CX125/CX155 only) and “V Keystone” Adjustments With “Side Shot” (horizontal keystone adjustment) provided for the projector, you can project the picture from the side of the screen. When projecting with “Side Shot” adjustment only, you can adjust the horizontal distortion of the screen to the maximum using “Side Shot.”... - Page 63 Input signals Video/60, Video/50, 480/60i, 575/50i, +/–15 480/60p, 575/50p ≠ ≠ 0 or b +/–18 +/–8 +/–25 1080/60i, 1080/50i, 540/60p +/–13 ≠ ≠ 0 or b +/–18 +/–8 +/–25 720/60p, 720/50p +/–13 ≠ ≠ 0 or b +/–18 +/–6 +/–25 PC, Air Shot (VPL-CX125/CX155 +/–11 only), except SXGA+...
-
Page 64: Dimensions
Dimensions Front 64.9 (2 Center of the lens Remote control detector (Front) 141 (5 Unit: mm (inches) 34 (1 123 (4 MUTING ENTER STANDBY COVER MENU KEYSTONE INPUT PROJECTOR DATA PUSH LAMP/ 372 (14 Unit: mm (inches) Dimensions... - Page 65 Side Center of the lens 88 (3 190 (7 15.9 ( 48 (1 16 ( 103 (4 260 (10 Projector suspension support mounting surface VPL-CX125/CX155 only 172 (6 78 (3 17 ( 18 ( AUDIO AUDIO NETWORK INPUT A INPUT B INPUT C MONITOR AUDIO...
- Page 66 Rear 154 (6 152.5 (6 Remote control detector (Rear) 326 (12 Unit: mm (inches) Bottom 148 (5 32 (1 174 (6 56.6 Holes for mounting a projector suspension 46.1 (1 support Center of the projector 12.2 ( Unit: mm (inches) Dimensions...
-
Page 67: Index
Floor installation ......... 58 Index Installing the projector ......21 IR Receiver ..........40 Adjuster ...........26 Lamp Mode ..........40 Air filter ...........47 Lamp Timer ..........43 Aspect ..........36, 37 Lamp Timer Reset ........42 Auto Input Search ........38 LAMP/COVER indicators ...... 15 Language .......... - Page 68 Screen size ..........21 Security bar ........14, 65 Security Lock .......... 39 Security lock ........... 14 Serial number .......... 43 Sharpness ..........35 Shift ............36 Side Shot ........... 40, 62 Signal type ..........43 Smart APA ..........38 Speaker ............
- Page 69 Sony Corporation...