Table of Contents
Advertisement
Quick Links
Data
Projector
Operating Instructions
Before operating the unit, please read this manual and supplied Quick Reference Manual
thoroughly and retain it for future reference.
VPL-SW536C/SW526C/SW536/SW526
VPL-SX536
Not all models are available in all countries and area. Please check
with your local Sony Authorized Dealer.
© 2012 Sony Corporation
4-453-101-12 (1)
Advertisement
Table of Contents
Related Manuals for Sony VPLSW526M
Summary of Contents for Sony VPLSW526M
-
Page 1: Operating Instructions
Before operating the unit, please read this manual and supplied Quick Reference Manual thoroughly and retain it for future reference. VPL-SW536C/SW526C/SW536/SW526 VPL-SX536 Not all models are available in all countries and area. Please check with your local Sony Authorized Dealer. © 2012 Sony Corporation... -
Page 2: Table Of Contents
Table of Contents The Function Menu ......26 Overview The Operation Menu ......27 Location and Function of Controls ..4 The Connection/Power Menu ...28 Main Unit ........4 The Installation Menu ......30 Connector Panel ......5 The Information Menu .....31 Remote Commander and Control Panel Keys ......... - Page 3 Using the Controller ....42 Displaying Images or Files Sent from a Tablet Device ....42 Projecting an Image using USB Connection Projecting an Image using USB Connection ........43 Starting USB Display ....43 Projecting an Image ....43 Using the Controller ....43 USB Media Viewer Using USB Media Viewer ....44 Thumbnail Mode ......45 Option Menu .......45...
-
Page 4: Location And Function Of Controls
B Overview Location and Function of Controls Main Unit 1 2 3 4 m Air filter cover/Ventilation holes (intake) (page 54) n Adjuster (page 18) o Interactive Pen detector (VPL-SW536C/SW526C only) p Security bar Connects to a commercially available security chain or wire. a Projection window q Security lock Connects to an optional security cable... -
Page 5: Connector Panel
Connector Panel 8 q; Input (pages 9, 10) Output (page 13) a INPUT A f OUTPUT Video: RGB/YP input connector Video: Monitor output connector (RGB/YP (MONITOR) Audio: Audio input connector (AUDIO) Audio: Audio output connector (AUDIO) b INPUT B Note Video: RGB input connector (RGB) This connector outputs the projected image or Audio: Audio input connector (AUDIO) -
Page 6: Remote Commander And Control Panel Keys
Remote Commander and Control Panel Keys Remote Commander a Turning on the power/Going to standby mode ?/1 (On/Standby) key b Selecting an input signal INPUT ECO MODE (page 14) INPUT key MENU RESET c Operating a menu (page 20) ENTER MENU key RESET key RETURN... - Page 7 3 Press the D ZOOM + key or the D 2 Press the V/v key or ECO MODE key ZOOM – key repeatedly to change the to select ECO or User mode. enlargement ratio. The image can be ECO: Sets each mode to the optimum enlarged up to 4 times.
-
Page 8: Interactive Pen Device (Vpl-Sw536C/Sw526C Only)
Interactive Pen Device (VPL-SW536C/SW526C only) 1 2 34 a Pen tip switch Functions as a mouse. b Color ring main: cyan/sub: orange c Indicator When you press the button, or touch the pen tip on the screen, this indicator lights up. -
Page 9: Connecting The Projector
B Preparation Connecting the Projector Notes • Make sure all the equipment is powered off when connecting the projector. • Use the proper cables for each connection. • Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or cause a malfunction. -
Page 10: Connecting A Video Equipment
USB connector (Type B) ( For connecting to a computer with a USB connector (“Projecting an Image using USB Connection” (page 43)). USB connector USB A-B cable (not (Type A) supplied) Computer Connecting a Video equipment Connections with a VHS video deck, DVD player, or BD player are explained for each input signal. -
Page 11: Connecting A Microphone
INPUT A For connecting video equipment with a YP output connector. Component – Mini D-sub 15-pin cable (not supplied) output connector Audio output connector Video equipment Audio cable (Phono plug × 2 – stereo mini plug) (not supplied) INPUT C For connecting video equipment with an HDMI output connector. -
Page 12: Connecting A Usb Memory Device
Connecting a USB memory device USB connector (Type A) ( For connecting a USB memory device (“Using USB Media Viewer” (page 44)). USB memory device (not supplied) Connecting a USB wireless LAN module USB connector (Type A) ( For connecting a USB wireless LAN module IFU-WLM3 (not supplied) (“Presentation Function via Network”... -
Page 13: Connecting An External Monitor And Audio Equipment
Connecting an External Monitor and Audio Equipment OUTPUT Projected images or input audio can be output to display equipment such as a monitor or audio equipment such as speakers with a built-in amplifier. Audio cable Audio equipment Audio input (stereo mini plug) connector (not supplied) Display equipment... -
Page 14: Projecting/Adjusting An Image
B Projecting/Adjusting an Image Projecting an Image The size of a projected image depends on the distance between the projector and screen. Install the projector so that the projected image fits the screen size. For details on projection distances “Projection Distance and Lens Shift Range” (page 62) and projected image sizes, see Notes •... - Page 15 The method to switch the output varies Open the lens shift cover depending on the type of computer. Open the cover with a flat-bladed (Example) screwdriver, etc. To project image files stored in a USB memory device, see “USB Media Viewer”...
-
Page 16: Adjusting The Projected Image
Adjusting the Projected image Focus Size (Zoom) Zoom lever Focus ring Projecting an Image... - Page 17 Position Position (Lens shift) For adjusting lens shift, turn each dial with a flat-bladed screwdriver, etc. Lens shift dial V Lens shift dial H Adjuster * Do not adjust the lens shift more than the indicated range, otherwise it may cause a malfunction.
- Page 18 Adjusting the tilt of the projector with the adjusters You can adjust the height of the projector using the adjusters. By changing the tilt of the projector with adjusters, you can adjust the position of the projected image. Notes • Be careful not to let the projector down on your fingers. •...
-
Page 19: Turning Off The Power
Displaying a pattern You can display a pattern for adjusting the projected image or a grid pattern with the PATTERN key on the remote commander. Press the PATTERN key again to restore the previous image. You can use a grid pattern as a guide to write text or to draw lines and shapes on the whiteboard or blackboard without using a computer. -
Page 20: Using A Menu
B Adjustments and Settings Using a Menu Using a MENU Note The menu displays used for the explanation below may be different depending on the model you are using. operations in step 3 and then press the Press the MENU key to display the ENTER key to register the setting. -
Page 21: The Picture Menu
The Picture Menu The Picture is used to adjust the picture for each input signal. Items Item descriptions Picture Mode Dynamic: Emphasizes the contrast to produce a dynamic and vivid picture. Standard: Provides an image which is natural and well balanced. Presentation : Provides a bright image, suitable for presentations. -
Page 22: The Screen Menu
The Screen Menu The Screen menu is used to adjust the size, position and aspect ratio of the projected image for each input signal. Items Item descriptions Aspect Changes the aspect ratio of the projected image (page 24). VPL-SW536C/ 4:3: Displays the image to fit the maximum projected image size SW526C/SW536/ with an aspect ratio fixed to 4:3. - Page 23 Items Item descriptions Adjust Signal Adjusts the image of computer signal. Use this item if the edge of the image is cut and reception is bad. *2 *3 Automatically adjusts the projected image to an optimum quality when you press the ENTER key (page 6). Phase Adjusts the dot phase of the display pixel and the input signal.
- Page 24 Aspect VPL-SW536C/SW526C/SW536/ *1: If you select “Normal,” the image is SW526 projected in the same resolution as the input signal without changing the aspect ratio of the original image. Input signal Recommended setting value and projected image *1 *2 *3 Full1 *2: If you select “Full2,”...
- Page 25 VPL-SX536 *1: If you select “Normal,” the image is projected in the same resolution as the input signal without changing the aspect Input signal Recommended setting value and ratio of the original image. projected image Full1 *2: If you select “4:3,” the image is projected to fit the projected image size, regardless of the aspect ratio of the image.
-
Page 26: The Function Menu
The Function Menu The Function menu is used for setting various functions of the projector. Items Item descriptions Volume The higher the value, the louder an audio volume and the lower the value, the lower the audio volume. Mic Volume Adjust the volume of the microphone. -
Page 27: The Operation Menu
Note *1: You will not be able to use the projector if you forget your password. If you call qualified Sony personnel because you have forgotten the password, you will be asked to verify the projector’s serial number and your identity. (This process may differ in other countries/regions.) Once your identity has been confirmed, we will provide you with the password. -
Page 28: The Connection/Power Menu
The Connection/Power Menu The Connection/Power menu is used for setting for the connections and power. Items Item descriptions LAN Settings IP Address Auto (DHCP): The IP address is assigned automatically from the Setup DHCP server such as a router. Manual: To specify the IP Address manually. WLAN Settings WLAN On/Off: Set the wireless output of the USB wireless LAN module (not... - Page 29 Items Item descriptions Direct Power On On/Off: When set to “On,” you can turn the power on without going to Standby mode when the AC power cord is connected to a wall outlet. With the projector turned off, you can also unplug the AC power cord without going to Standby mode, regardless of the Direct Power On setting.
-
Page 30: The Installation Menu
The Installation Menu The Installation menu is used for installing the projector. Items Item descriptions Image Flip HV/H/V/Off: Flips the projected image horizontally or vertically according to the installation method. Installation Attitude Right Side Up/Upside Down/Front Up/Front Down/Link to Image Flip: Change the cooling setting to suit to the installation attitude. -
Page 31: The Information Menu
The Information Menu The Information menu is used to check projector status, such as total usage time of the lamp. Items Item descriptions Model Name Displays the model name. Serial No. Displays the serial number. fH/fV Displays the horizontal/vertical frequency of the current input signal. Signal Type Displays the type of the current input signal. -
Page 32: Using Network Features
• To display messages, specific application Projector Station for Network Control (Version 1.1 or later) is necessary. http://pro.sony.com/bbsc/ssr/cat-projectors/resource.downloads Contact your local Sony dealer for the Projector Station for Network Control application. Displaying the Control Window of the Projector with a Web Browser Connect the LAN cable. -
Page 33: Confirming The Information Regarding The Projector
Entry area for [User] the remote commander. When you change the password, input a new password after deleting the password (*****) that was set. Note If you forget your password, consult with qualified Sony personnel. Using Network Features... -
Page 34: Using The E-Mail Report Function
Mail Report button Using the e-mail report Function Set the e-mail report function on the Setup page. Entered values will not be applied unless you click on [Apply]. Click on [Owner information] to enter the owner information recorded in the e-mail report. - Page 35 SMTP Authentication: Check this check box to arrange for SMTP authentication to be performed before sending e-mail. Account Name: Enter the mail account name. Password: Enter the password. Confirm the contents of the e-mail report. When you click on [View], the contents of the e-mail report are displayed.
-
Page 36: Interactive Function
The main device can use all the functions, whereas the sub device can use only the drawing function. Use of these functions requires installation of Interactive Presentation Utility 2. For Interactive Presentation Utility 2 software update, visit Sony’s web site. https://www.servicesplus.sel.sony.com/ http://pro.sony.eu/InteractiveUtility... -
Page 37: Connecting A Computer With A Usb Cable
Notes The interactive function works by a detector in the projector, which picks up infrared rays emitted from the tip of the Interactive Pen Device. Observe the precautions noted below. • Avoid placing the projector where the Interactive Pen detector is directly exposed to fluorescent light or other strong light. - Page 38 Main Pen toolbar Toolbar Taskbar Projector connected to computer. a Calibration Auto Projector not connected to computer. b Calibration Main c Calibration Sub Click “Calibration” to select “Calibration Auto.” The calibration starts automatically. Calibration Auto/Manual Note Calibration aligns the points where the pen Observe the precautions noted below during the (Main and Sub) is pointing and where the calibration.
- Page 39 Operating with the Interactive Pen Device With the Interactive Pen Device, you can use the functions of the toolbar on the screen. See “User’s Guide of Interactive Presentation Utility 2” for details. Closing Interactive Presentation Utility 2 Click the icon in the taskbar to display the pop-up menu, then select [Exit].
-
Page 40: Presentation Function Via Network
Presentation Function via Network requires installation of Projector Station for Network Presentation (supplied CD-ROM). For information on updates of Projector Station for Network Presentation, visit Sony’s web site: https://www.servicesplus.sel.sony.com/ System requirements for using the application are as follows. WindowsXP: Home/Professional (recommended) -
Page 41: Projecting An Image
Note Projecting an Image Display related settings (such as your After starting Projector Station for Network computer’s resolution) change when the Presentation, the connection setting window application is started. appears. Connection Settings Find projectors connected to the network. Item Item descriptions Click “Search”... -
Page 42: Using The Controller
Using the Controller Displaying Images or Files Sent from a Tablet Device You can project JPEG images, PDF files, etc. Network stored in a tablet device wirelessly by using Presentation a specific application. For downloading or detailed method of using the application, access the following URL. -
Page 43: Projecting An Image Using Usb Connection
B Projecting an Image using USB Connection Projecting an Image using USB Connection You can also project an image simply by connecting the projector and computer with a USB A- B cable (not supplied). Projecting an image using USB connection requires to start USB Display. System requirements for using the application are as follows. -
Page 44: Usb Media Viewer
B USB Media Viewer Using USB Media Viewer You can browse image files stored in a USB memory device inserted in the USB connector of the projector, without using a computer. Supported storage media and file format: • Supported storage media: USB flash memory •... -
Page 45: Thumbnail Mode
Thumbnail Mode The image files in the folder are displayed as a thumbnail list. Option menu Press the V/v/B/b key on the remote commander to select an image, then press the ENTER key. The option menu appears in the lower part of the screen. Option Menu You can select the display order of thumbnails and display method of image files. -
Page 46: Display Mode
Display Mode In display mode, you can view a selected image in full screen view. Option menu Press the ENTER key on the remote commander. The option menu appears in the lower part of the screen. Option Menu Items Item descriptions Hide the option menu. -
Page 47: Option Menu
Option Menu Items Item descriptions Hide the option menu. Return to the thumbnail mode (page 45). Display the previous image. Display the next image. Press the V/v key to change the slideshow time interval. Slideshow time interval After 3 seconds, display the next image. After 5 seconds, display the next image. -
Page 48: Indicators
Flashes in red The projector is in abnormal status. Symptoms are indicated by number of flashes. Address the problem in accordance with the following. If the symptom is shown again, consult with qualified Sony personnel. Flashes twice The internal temperature is unusually high. Check the items below. -
Page 49: Messages List
Messages List When any of the messages listed below appears on the projected image, address the problem in accordance with the table below. Messages Meaning/Remedy Page High temp.! Lamp off in Check the items below. 4, 4, 1 min. • Check if nothing is blocking the ventilation holes. 30, 54 •... -
Page 50: Troubleshooting
Troubleshooting Before asking to have the projector repaired, try to diagnose the problem, following the instructions below. Symptoms Remedy Page The power is not turned Check if the AC power cord is firmly connected. – When the “Control Key Lock” is set to “On,” you cannot turn on the projector using the ?/1 key on the projector. - Page 51 Symptoms Remedy Page The image is dark/too The settings for “Brightness,” “Contrast,” and “Lamp Mode” 21, 28 bright. affect brightness of the image. Check if the value is appropriate. The image will be dark when the lamp is burnt out. Check 31, 52 “Lamp Timer,”...
-
Page 52: Replacing The Lamp
Do not put your hands into the slot. Notes • If the lamp breaks, contact qualified Sony personnel. Do not replace the lamp yourself. • When removing the lamp, be sure to pull it out straight, by holding the designated location. - Page 53 Loosen the 2 screws on the lamp then Close the lamp cover and tighten the pull out the lamp by its grab. 1 screw. Grab Note Be sure to install the lamp securely as it was. If not, the projector cannot be turned Connect the AC power cord to a wall outlet and turn on the projector.
-
Page 54: Cleaning The Air Filter
If the dust cannot be removed from the air filter even after cleaning, replace the air filter with a new one. For details on a new air filter, consult with qualified Sony personnel. Caution If you neglect to clean the air filter, dust may accumulate, clogging it. As a result, the temperature may rise inside the unit, leading to a possible malfunction or fire. - Page 55 Reattach the air filter cover to the unit. Note Be sure to attach the air filter cover firmly. If not, the projector cannot be turned on. Cleaning the Air Filter...
-
Page 56: Specifications
Specifications Items Descriptions Model VPL-SW536C/SW526C/SW536/SW526/VPL-SX536 Projection system 3 LCD system Display device Effective display VPL-SW536C/SW526C/SW536/SW526: 0.75 inch size (19.0 mm), 3 plate panels, Aspect ratio 16:10 VPL-SX536: 0.63 inch (16.0 mm), 3 plate panels, Aspect ratio 4:3 Effective picture VPL-SW536C/SW526C/SW536/SW526: elements 3,072,000 pixels (1280 ×... - Page 57 Items Descriptions Model VPL-SW536C/SW526C/SW536/SW526/VPL-SX536 INPUT OUTPUT INPUT A RGB/YP input connector: Mini D-sub 15 pin (Computer/video) female, G with sync/Y: 1 Vp-p ± 2 dB, sync negative, 75 ohms terminated, RGB/P : 0.7 Vp-p ± 2 dB, 75 ohms terminated, Sync signal: TTL level high impedance, positive/negative Audio input connector: Stereo mini jack, rated input 500 mVrms, input impedance more than 47 kohms...
- Page 58 *1: For details, refer to “Acceptable Input Signals*1” on page 61. *2: Information on accessories in this manual is current as of March 2013. *3: Not all optional accessories are available in all countries and area. Please check with your local Sony Authorized Dealer. Specifications...
- Page 59 Design and specifications of the unit, including the optional accessories, are subject to change without notice. Notes • Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF...
- Page 60 Pin assignment HDMI connector (HDMI, female) GND (R) Vertical sync signal GND (G) DDC/SCL GND (B) T.M.D.S. T.M.D.S. Data2+ Clock Shield RS-232C connector (D-Sub 9-pin, T.M.D.S. T.M.D.S. male) Data2 Shield Clock – T.M.D.S. N.C. Data2 – T.M.D.S. RESERVED Data1+ (N.C.) T.M.D.S.
- Page 61 Input connector Acceptable Input Signals fH[kHz]/ Resolution RGB/ fV[Hz] HDMI RGB Computer signal Input connector 1280 × 800 49.7/60 fH[kHz]/ Resolution RGB/ fV[Hz] HDMI RGB Digital TV signal 640 × 350 31.5/70 Input connector 37.9/85 Signal fV[Hz] RGB/ HDMI 640 × 400 31.5/70 37.9/85 480i...
-
Page 62: Projection Distance And Lens Shift Range
Projection Distance and Lens Shift Range The projection distance is the distance between the center of the projection window and the surface of the projected image. The following describes the projection distance and height from the center of the projection window to edge of screen by each projected screen size. Height H is the height from the bottom of the projected image (top for wall mount) to A (determined by drawing a perpendicular line from the center of the projection window to projected image surface). - Page 63 Wall Installation Height H from center of the projection window to top of screen Center of the projection window Projected image Projection distance L L: Projection distance L H: Distance between the edge of the image and the center of the projection window The lens shift range is the distance you can move the lens shift from the center of the projected image(0) when full width and full height of the projected image is regarded as 100%.
- Page 64 Projection distance table (VPL-SW536C/SW526C/SW536/SW526) Unit: m (inches) Height H from center of Projected image size Projection projection window to Distance L edge of screen Diagonal D Width × Height 70 inch (1.78 m) 1.51 × 0.94 0.416-0.428 0.138 80 inch (2.03 m) 1.72 ×...
- Page 65 Projection distance table (VPL-SX536) Unit: m (inches) Height H from center of Projected image size Projection projection window to Distance L edge of screen Diagonal D Width × Height 60 inch (1.52 m) 1.22 × 0.91 0.424-0.436 0.163 70 inch (1.78 m) 1.42 ×...
-
Page 66: Dimensions
Dimensions 384.4 (15 137.7 (5 Center of the projection window Unit: mm (inches) Dimensions... - Page 67 Side Center of the projection window Unit: mm (inches) Bottom 180 (7 71 (2 Center of the projection window 16 ( 6.6 ( 19.7 ( 150.3 (5 199 (7 90 (3 Unit: mm (inches) Dimensions...
-
Page 68: Index
Index H (Horizontal) .........23 High Altitude Mode .........30 Hue ............21 AC IN ............5 Acceptable input signal ......61 Image Flip ..........30 Adjust Signal ........... 23 Information menu ........31 Adjuster ..........4, 18 Input ............5 Air filter ........... 54 Installation menu ........30 Air filter cover/Ventilation holes Interactive Function .........36 (intake) .......... - Page 69 Projector Station for Network About Trademarks Presentation ........40 • Adobe and Adobe Acrobat are trademarks or registered trademarks of Adobe Systems Incorporated in the United States Remote commander ........6 and/or other countries. Remote control detector ......4 • Kensington is a registered trademark of Replacing the lamp ........52 Kensington Technology Group.
- Page 70 Sony Corporation...