Advertisement
Quick Links
JKP30SM
GE
27" Built-In Single Wall Oven
®
Dimensions and Installation Information (in inches)
KW Rating
240V
3.4
208V
2.6
Breaker Size
240V
20 Amps
208V
20 Amps
Note: These ovens are not approved for stackable or
side-by-side installations.
Note: Cabinets installed adjacent to wall ovens must have
an adhesion spec of at least a 194°F temperature rating.
Note: For 27" built-in single ovens, if marks, blemishes or
the cutout opening is visible above the installed oven, it
may be necessary to add wood shims under the runners
and front trim until the marks or openings are covered.
10
Note: Door handle protrudes 3" from door face. Cabinets
A
and drawers on adjacent 45° and 90° walls should be
Allow 3/4"
for overlap
placed to avoid interference with the handle.
over all edges
of cutout
Electric wall ovens are not approved for installation
with a plug and receptacle. They must be hard wired in
accordance with installation instructions.
Installation Information: Before installing, consult
installation instructions packed with product for current
dimensional data.
D
32-1/2
E
For answers to your Monogram,
GE Profile
®
C MIN.
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
Conduit 48-1/2" long
2" x 4"
®
or equiv.
800.626.2000.
runners
B MIN.
Suitable
G
bracing
to support
runners
F
or
™
service,
2" x 4" or
C L
equivalent
runners
18"
Over centerline
of cabinet
(must support 275 lbs.)
Cabinet
27"
A – Cabinet width required
27" min.
B – Minimum cabinet depth
23-5/8"
C – Opening width
25" min. - 25-1/4" max
D – Opening height
27-5/8" min. - 28-1/8" max.
Oven
E – Overall depth*
23-5/8"
F – Overall height with trim
29-7/8" - 30-3/4"
Overall height without trim
29"
G – Overall width
26-5/8"
*Depth including door handle is approximately 26-7/10" min. to
26-8/10" max.
10
A
Locate
junction box
either 5" MIN.
below cutout
floor or 44"
MIN. above
cutout floor
Access
from
D
adjacent
cabinet
required
Minimum
cutout location
32-1/2
from floor
C MIN.
(Minimum 15-5/8"
Conduit 48-1/2" long
from floor when
2" x 4"
installed below built-in
or equiv.
microwave oven)
runners
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
Specification Revised 10/07
Allow 3/4"
for overlap
over all edges
of cutout
B MIN.
G
to suppor
F
E
Listed by
Underwriters
Laboratories
320444
Suitable
bracing
runners
Advertisement
Related Manuals for GE JKP30SM
Summary of Contents for GE JKP30SM
- Page 1 32-1/2 For answers to your Monogram, GE Profile ® ™ C MIN. ® appliance questions, visit our website at ge.com or call GE Answer Center Conduit 48-1/2" long service, 2" x 4" ® or equiv. 800.626.2000. runners Locate junction box either 5"...
-
Page 2: Installation Dimensions
36" Typical Countertop Height Note: Oven is rated for use only under 30" standard or sealed burner gas and selected 30" CleanDesign and Calrod Installation Information: Before installing, consult installation instructions packed with product for current dimensional data. Electric wall ovens are not approved for installation with a plug and receptacle. - Page 3 • Hidden Bake Oven Interior - Hides previously exposed bottom element to deliver a clean interior appearance • Interior Oven Light - Supplies light to make viewing the progress of cooking easy and convenient • Eight-Pass Bake Element - A powerful, continuous heating element loops throughout the oven, delivering evenly cooked foods •...