5
JTP30BM/CM/WM
GE
30" Built-In Single Wall Oven
®
23-1/2'' MIN.
Dimensions and Installation Information (in inches)
Cutout depth
KW Rating
240V
4.5
A
208V
3.4
B
Breaker Size
240V
20 Amps
27-1/4'' MIN.
208V
20 Amps
27-5/16'' MAX.
Cutout height
Most 30" Wall Cabinets can be used with this unit.
Note: These ovens are not approved for stackable
installations.
Note: Cabinets installed adjacent to wall ovens
must have an adhesion spec of at least a 194°F
temperature rating.
Recommended
Door handle protrudes 3" from door face. Cabinets
and drawers on adjacent 45° and 90° walls should be
cutout location
placed to avoid interference with the handle.
32-1/2"
Installation Information: Before installing, consult
from floor
installation instructions packed with product for
current dimensional data.
Electric wall ovens are not approved for installation
with a plug and receptacle. They must be hard
wired in accordance with installation instructions.
Side-by-side installations require at least 2"
between cutouts.
For answers to your Monogram,
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
800.626.2000.
Junction
box
location
22'' MIN.
Suitable
bracing
to support
runners
GE Profile
or
®
™
service,
®
C L
2 x 4 or
equivalent
runners
21-5/8"
over centerline
of cabinet
(must support 275 lbs.)
29-3/4
Conduit
(72"
C
long)
21
Allow minimum of 21'' for clearance
to adjacent corners, drawers, walls, or etc.
A=Allow 1" overlap of oven over top and bottom edges of cutout.
B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.
C=28-1/4" without trim and 28-3/4" with trim.
Specification Revised 10/07
Cutout width
28-1/2'' MIN.
28-5/8'' MAX.
5
23-1/2'' MIN.
Cutout depth
Junction
box
location
A
B
22'' MIN.
27-1/4'' MIN.
27-5/16'' MAX.
Cutout height
Recommended
cutout location
32-1/2"
from floor
30
Listed by
Underwriters
Laboratories
320220
Suitab
bracin
to suppo
runner