Return the product to your local recycling facility or contact your municipal office. VISIT OUR WEBSITE FOR: - Products - Brochures - User manuals - Trouble shooter - Service information www.aeg.com LEGEND Warning - Important Safety information. General information and tips Environmental information Subject to change without notice...
Page 3
ENGLISH FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
SAFETY INFORMATION Before the installation and use of the Water connection appliance, carefully read the supplied • Make sure not to cause damage to instructions. The manufacturer is not re- the water hoses. sponsible if an incorrect installation and use causes injuries and damages. Al- •...
Page 5
ENGLISH cian to change a damaged mains ca- • Do not drink and play with the water ble. in the appliance. • Connect the mains plug to the mains • Do not remove the dishes from the socket only at the end of the installa- appliance until the programme is tion.
PRODUCT DESCRIPTION Worktop Water hardness dial Top spray arm Rinse aid dispenser Upper spray arm Detergent dispenser Lower spray arm Cutlery basket Filters Lower basket Rating plate Upper basket Salt container...
ENGLISH CONTROL PANEL On/off button Start button Programme guide Delay button Programme marker Multitab button Indicators Programme knob Display Indicators Description Washing phase indicator. Drying phase indicator. Rinse aid indicator. This indicator is off while the programme operates. Salt indicator. This indicator is off while the pro- gramme operates.
PROGRAMMES Programme Degree of soil Programme phases Energy Water Type of load (kWh) Prewash 0.9 - 1.7 8 - 17 Crockery, cutlery, Wash 45 °C or 70 °C pots and pans Rinses Fresh soil Wash 60 °C Crockery and Rinse cutlery Normal soil Prewash...
ENGLISH OPTIONS MULTITAB FUNCTION The function stays on until you deactivate it. Press Multitab, Activate this function only when you the Multitab indicator goes off. use the combi detergent tablets. This function deactivates the flow of If you stop to use the combi rinse aid and salt.
BEFORE FIRST USE 1. Make sure that the set level of the ADJUSTING THE WATER water softener agrees with the water SOFTENER hardness in your area. If not, adjust the water softener. Contact your lo- Hard water contains a high quantity of cal water authority to know the wa- minerals that can cause damage to the ter hardness in your area.
ENGLISH Manual adjustment Turn the water hardness dial to the po- sition 1 or 2. Electronic adjustment 5. Press Multitab. • The indicators go off. 1. Press the on/off button to activate • The indicator continues to the appliance. flash. 2.
FILLING THE RINSE AID DISPENSER CAUTION! Only use rinse aid for dishwash- ers. Other products can cause damage to the appliance. The rinse aid, during the last rinsing phase, helps to dry the dishes without streaks and stains. Press the release button (D) to open the lid (C).
ENGLISH DAILY USE 1. Open the water tap. • Do not put in the appliance items that can absorb water (sponges, 2. Press the on/off button to activate household cloths). the appliance. Make sure that the appliance is in setting mode. Refer •...
Do not use more than the cor- • The display shows the pro- rect quantity of detergent. Refer gramme duration that decreases to the instructions on the deter- with steps of 1 minute. gent packaging. Starting a programme with Detergent tablets do not fully delay start dissolve with short programmes and detergent residues can stay...
ENGLISH Make sure that there is deter- • For better drying results, keep the gent in the detergent dispenser appliance door ajar for some mi- before you start a new pro- nutes. gramme. • Let the dishes become cold before you remove them from the appli- At the end of the programme ance.
CARE AND CLEANING WARNING! Dirty filters and clogged spray arms decrease the washing re- sults. Before maintenance, deactivate the ap- Make a check regularly and, if pliance and disconnect the mains plug necessary, clean them. from the mains socket. CLEANING THE FILTERS Turn the filter (A) counter- clockwise and remove it.
ENGLISH TROUBLESHOOTING The appliance does not start or it stops • - The appliance does not drain during operation. the water. First try to find a solution to the prob- • - The anti-flood device is on. lem (refer to the table). If not, contact WARNING! the Service.
Page 18
THE WASHING RESULTS AND DRYING RESULTS ARE NOT SATISFACTORY Problem Possible cause Possible solution The dishes are not The filters are clogged. Clean the filters. clean. The filters are not correctly Make sure that the filters are assembled and installed. correctly assembled and in- stalled.
Page 19
ENGLISH Problem Possible cause Possible solution The quantity of detergent Make sure that you add the was too much. correct quantity of detergent in the dispenser before you start a programme. Dry water drop The released quantity of Increase the released quanti- stains on glasses rinse aid was not sufficient .
INSTALLATION WARNING! Refer to “SAFETY INFORMA- TION”. INSTALLATION UNDER A KITCHEN COUNTER Make sure that the dimen- 570-600 mm sions of the recess agree with the dimensions in the figure. 820 mm Put the appliance adjacent to a water tap and a water drain.
ENGLISH WATER DRAIN CONNECTION Connect the water drain hose to: • The sink spigot. Attach the water drain hose under the kitchen counter. max. 850 mm This prevents that waste water from the sink goes back to the appliance. max. •...