hit counter script
AEG FAVORIT 55020 W0P User Manual
AEG FAVORIT 55020 W0P User Manual

AEG FAVORIT 55020 W0P User Manual

Dishwasher
Hide thumbs Also See for FAVORIT 55020 W0P:

Advertisement

Quick Links

EN User manual
FAVORIT 55020 W0P

Advertisement

Table of Contents
loading

Summary of Contents for AEG FAVORIT 55020 W0P

  • Page 1 EN User manual FAVORIT 55020 W0P...
  • Page 2: Table Of Contents

    11. TECHNICAL INFORMATION ..........15 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler –...
  • Page 3: Safety Instructions

    ENGLISH SAFETY INSTRUCTIONS Before the installation and use of the ap- the power supply. If not, contact an pliance, carefully read the supplied in- electrician. structions. The manufacturer is not re- • Always use a correctly installed shock- sponsible if an incorrect installation and proof socket.
  • Page 4 WARNING! • Do not sit or stand on the open door. Dangerous voltage. • Dishwasher detergents are dangerous. • If the water inlet hose is damaged, im- Obey the safety instructions on the mediately disconnect the mains plug detergent packaging.
  • Page 5: Product Description

    ENGLISH 2. PRODUCT DESCRIPTION Worktop Air vent Top spray arm Rinse aid dispenser Upper spray arm Detergent dispenser Lower spray arm Cutlery basket Filters Lower basket Rating plate Upper basket Salt container 3. CONTROL PANEL...
  • Page 6: Programmes

    On/off button Start button Programme guide Delay button Programme marker Multitab button Indicators Programme knob Display Indicators Description Washing phase indicator. Drying phase indicator. Rinse aid indicator. This indicator is off while the programme operates. Salt indicator. This indicator is off while the pro- gramme operates.
  • Page 7: Options

    ENGLISH 3) With this programme you can wash a load with fresh soil. It gives good washing results in a short time. 4) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil. (This is the standard programme for test institutes).
  • Page 8: Adjusting The Water Softener

    6.1 Adjusting the water softener Water softener Water hardness adjustment German French mmol/l Clarke Electronic degrees degrees degrees (°dH) (°fH) 47 - 50 84 - 90 8.4. - 9.0 58 - 63 43 - 46 76 - 83 7.6 - 8.3...
  • Page 9: Daily Use

    ENGLISH 6.2 Filling the salt container Turn the cap counterclockwise and open the salt container. Put 1 litre of water in the salt con- tainer (only for the first time). Fill the salt container with dishwash- er salt. Remove the salt around the opening of the salt container.
  • Page 10: Setting Mode

    10 www.aeg.com 5. Set and start the correct programme for the type of load and the degree of soil. 7.1 Using the detergent Press the release button (B) to open the lid (C). Put the detergent in the compart- ment (A) .
  • Page 11: Hints And Tips

    ENGLISH Cancelling the delay start 1. Press the on/off button to deactivate the appliance. while the countdown operates 2. Close the water tap. 1. Press and hold Multitab and Delay If you do not press the on/off at the same time until: button, the Auto Off device au- •...
  • Page 12: Care And Cleaning

    12 www.aeg.com • Do not put in the appliance items • Make sure that the spray arms can made of wood, horn, aluminium, pew- move freely before you start a pro- ter and copper. gramme. • Do not put in the appliance items that can absorb water (sponges, household 8.4 Before starting a...
  • Page 13: Troubleshooting

    ENGLISH To disassemble the filter (A), pull apart (A1) and (A2). Remove the filter (B). Wash the filters with water. Before you put the filter (B) back, make sure that there are no residues of food or soil in or around the edge of the sump.
  • Page 14 14 www.aeg.com Problem Possible solution Make sure that there is not a damaged fuse in the fuse box. The programme does not start. Make sure that the appliance door is closed. Press Start. If the delay start is set, cancel the setting or wait for the end of the countdown.
  • Page 15: Technical Information

    ENGLISH 3. Press and hold, at the same time, Multitab and Delay until the indica- tors , and start to flash. 4. Press Delay. 5. Press Delay again and again to • The indicators go off. change the setting. • The indicator continues to 6.
  • Page 16 www.aeg.com/shop...

Table of Contents