Table of Contents
Related Manuals for Velleman VRC801D2
Summary of Contents for Velleman VRC801D2
- Page 1 VRC801D2 UNIVERSAL 8-IN-1 REMOTE CONTROL WITH BLUE LCD DISPLAY USER MANUAL...
- Page 2 VRC801D2 VELLEMAN...
-
Page 3: Device Code Assignment
Please keep this user manual for future reference. Device Code Assignment Bank for Device Initial code Total of codes Satellite, Cable, DVB 413 3 3 3 DVD,DVR TUNER TUNER TAPE TAPE AMP, LD， ， ， ， VCD Total codes: 1849 VRC801D2 VELLEMAN... - Page 4 OK EXIT Functions just like the UP，DOWN，LEFT，RIGHT， OK and EXIT Keys on your original remote control for menu function. During the set up mode they are only used as a cursor for confirming and exiting remote control programming. VRC801D2 VELLEMAN...
-
Page 5: Set-Up By Auto Search
If set-up via brand name and code has been unsuccessful or if you can not find the brand name on the remote control screen, you can also use the Auto Search function to find the right code for your device. VRC801D2 VELLEMAN... -
Page 6: Set-Up By Enter Code
8. Check whether majority of the keys function correctly or not. If the majority of the keys do not function correctly, please press try another 3-figure code (e.g. 010…) listed under the same brand name in the code list. Repeat steps 3 to 7 until all basic functions function VRC801D2 VELLEMAN... - Page 7 9. Press a device key (e.g. TV) to exit the learning operation once all the desired commands have been programmed. Remark: A programmed target key can programmed from various source keys more than once. This remote control only Saves the most recently programmed signal. VRC801D2 VELLEMAN...
- Page 8 3.Press the UP or DOWN key to select Delete All in the LCD menu and then press OK. 4.Sure Delet is displayed on the LCD screen, press OK to confirm this query. Success is displayed on the LCD screen. VRC801D2 VELLEMAN...
- Page 9 3. Press the UP or DOWN key to select Macro 2 in the LCD menu, and then press OK. 4. Press the UP or Down key to select Delete in the LCD menu and then press OK. 5. Sure Delete is displayed on the LCD screen. Press OK to confirm the deleting operation VRC801D2 VELLEMAN...
-
Page 10: Other Setup
C． ． ． ． Locking a Device Use the device lock function to fix the current device code. The device code cannot be subsequently changed via brand name and code or automatic search. You can set it to OFF to VRC801D2 VELLEMAN... - Page 11 Success is displayed on the LCD screen. 5. You can press any device key to exit set-up, or press the exit key to return to the last status or use the UP or DOWN key to select another set-up. VRC801D2 VELLEMAN...
-
Page 12: Delete All
Sure Clear is displayed on the LCD screen. Press OK to delete all the settings and to return to the factory settings. For more info concerning this product, please visit our website www.velleman.eu. The information in this manual is subject to change without prior notice.