Table of Contents
Advertisement
CDC-R30MP/X30MP
SERVICE MANUAL
Ver 1.1 2003. 08
• The CD section have no adjustment.
RADIO SECTION
(FM)
Frequency Range: 87.5 MHz – 108 MHz
Intermediate frequency: 10.7 MHz (CDC-R30MP)
Usable Sensitivity: 12.7 dBf
50 dB Quieting Sensitivity: 17.2 dBf
IF Rejection: 100 dB
Frequency Response: 30 Hz – 15,000 Hz
S/N Ratio: 67 dB (CDC-R30MP)
70 dB (CDC-X30MP)
Stereo Separation: 35 dB at 1 kHz
Alternate Channel Selectivity: 98 dB
Capture Ratio: 3 dB
(AM) (CDC-X30MP)
Frequency Range: 530 kHz – 1,710 kHz
Usable Sensitivity: 30 µV (30 dB)
(MW) (CDC-R30MP)
Frequency Range: 531 kHz – 1,602 kHz
Intermediate frequency: 10.71 MHz/450 kHz
Usable Sensitivity: 30 µV (30 dB)
(LW) (CDC-R30MP)
Frequency Range: 144 kHz – 288 kHz (1 kHz/9 kHz step)
Intermediate frequency: 10.71 MHz/450 kHz
Usable Sensitivity: 30 µV (30 dB)
Sony Corporation
9-877-187-02
2003H04-1
e Vehicle Company
© 2003. 08
Published by Sony Engineering Corporation
Photo: CDC-R30MP
Model Name Using Similar Mechanism
CD Drive Mechanism Type
Optical Pick-up Name
SPECIFICATIONS
CD SECTION
Frequency Response: 17 Hz – 20 kHz +0/–3 dB
Dynamic Range: More than 92 dB
Channel Separation: More than 60 dB
S/N Ratio: More than 90 dB
Wow/Flutter: Unmeasurable
MP3 Decoding: MPEG 1 Audio Layer 3
AUDIO SECTION
Max. Power Output: 45 W × 4 channels
AUX Input
Input sensitivity (load impedance) AUX: 300 mV (10 kΩ)
FM/AM COMPACT DISC PLAYER
FM/MW/LW COMPACT DISC PLAYER
US Model
Canadian Model
CDC-X30MP
AEP Model
UK Model
CDC-R30MP
NEW
MG-930M-185
OPTIMA-752B2
– Continued on next page –
CDC-X30MP
CDC-R30MP
1
Advertisement
Table of Contents
Related Manuals for Sony CDC-R30MP
Summary of Contents for Sony CDC-R30MP
- Page 1 Frequency Response: 17 Hz – 20 kHz +0/–3 dB Frequency Range: 87.5 MHz – 108 MHz Dynamic Range: More than 92 dB Intermediate frequency: 10.7 MHz (CDC-R30MP) Channel Separation: More than 60 dB Usable Sensitivity: 12.7 dBf S/N Ratio: More than 90 dB 50 dB Quieting Sensitivity: 17.2 dBf...
- Page 2 NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.
-
Page 3: Table Of Contents
CDC-R30MP/X30MP TABLE OF CONTENTS 1. GENERAL Connections (CDC-X30MP) ........... 4 Connections (CDC-R30MP) ........... 5 2. DISASSEMBLY 2-1. Sub Panel Assy ..............8 2-2. CD Mechanism Block ............8 2-3. Main Board Section ............9 2-4. Main Board ................. 9 2-5. Heat Sink (CT) ..............10 2-6. -
Page 4: General
CDC-R30MP/X30MP SECTION 1 GENERAL This section is extracted from instruction manual. CONNECTIONS (CDC-X30MP) -
Page 5: Connections (Cdc-R30Mp)
CDC-R30MP/X30MP CONNECTIONS (CDC-R30MP) - Page 6 CDC-R30MP/X30MP...
-
Page 7: Disassembly
CDC-R30MP/X30MP SECTION 2 DISASSEMBLY Note : This set can be disassemble according to the following sequence. 2-1. SUB PANEL ASSY (Page 8) 2-2. CD MECHANISM BLOCK (Page 8) 2-3. MAIN BOARD SECTION 2-6. SUB BOARD (Page 9) (Page 10) 2-7. -
Page 8: Sub Panel Assy
CDC-R30MP/X30MP Note : Follow the disassembly procedure in the numerical order given. 2-1. SUB PANEL ASSY 3 claws 2 claws 1 B 2.6x6 4 sub panel assy 2-2. CD MECHANISM BLOCK 2 PTT 2.6x6 4 P 2.6x4 6 CD mechanism block 1 PTT 2.6x6... -
Page 9: Main Board Section
CDC-R30MP/X30MP 2-3. MAIN BOARD SECTION 6 Removal the solder. 7 MAIN board section 4 Removal the solder. 5 Removal the solder. 1 PTP 2.6x4 3 insulation sheet 2 cover 2-4. MAIN BOARD 6 side chassis (L) 1 PTT 2.6x6 4 PTT 2.6x6 5 PTT 2.6x6... -
Page 10: Heat Sink (Ct)
CDC-R30MP/X30MP 2-5. HEAT SINK (CT) 1 screw (2.6x8) 2 P 3x12 3 PTT 2.6x8 4 heat sink (CT) 2-6. SUB BOARD 2 P 1.4x2 3 SUB board 1 Removal the solders. blue brawn black... -
Page 11: Servo Board
CDC-R30MP/X30MP 2-7. SERVO BOARD 5 PIC2 FLEXIBLE board 1 Removal the solders. yellow black green 4 SERVO board 2 PTT 2x3 3 screws (M1.7x4) ground point 2-8. FLOATING BLOCK ASSY 2 tension spring qd floating block aasy 1 tension spring... -
Page 12: Lever Assy (Cd Up Holder Cnf)
CDC-R30MP/X30MP 2-9. LEVER ASSY (CD UP HOLDER CNF) 1 P 1.4x2 5 lever assy (CD up holder CNF) 2 leaf spring (roller) 4 tension spring 3 special screw 2-10. LEVER (CD ROLLER) SUB ASSY 3 lever (CD roller) sub assy... -
Page 13: Lever Assy (Cd Holder)
CDC-R30MP/X30MP 2-11. LEVER ASSY (CD HOLDER) 4 lever assy (CD holder) 2 special screw 1 torsion spring 2-12. MOTOR (SLED) SUB ASSY 1 P 1.7x2 2 motor (sled) sub assy... -
Page 14: Pick-Up Sub Assy
CDC-R30MP/X30MP 2-13. PICK-UP SUB ASSY 1 B 1.4x5 2 leaf spring 3 pick-up sub assy... -
Page 15: Electrical Adjustment
CDC-R30MP/X30MP SECTION 3 ELECTRICAL ADJUSTMENT RDS Adjustment (CDC-R30MP only) Setting: 98 MHz 31 dBµV (EMF) 1 kHz (Modulation Frequency) 45 kHz DEV Check point: S.METER test point Adjustment location: SFR101 Specification: 2.0±0.1 V Procedure: Set to FM98.0 MHz and adjust SFR101 so that the test point is 2.0±0.2 V. -
Page 16: Diagrams
CDC-R30MP/X30MP SECTION 4 DIAGRAMS 4-1. IC PIN DESCRIPTIONS • IC201 µPD63760GJ-8EN (RF AMP, DSP, DEC) (SERVO BOARD) Pin No. Pin Name Pin Description R GND — Ground pin for DRAM I/F Reset signal input from the mechanism control IC (IC301) 3 –... - Page 17 CDC-R30MP/X30MP Pin No. Pin Name Pin Description LOCK LOCK signal output to the mechanism control IC (IC301) C1D1 Error correction information output Not used in this set. (Open) C1D2 Error correction information output Not used in this set. (Open) C2D1 (RMUTE)
- Page 18 CDC-R30MP/X30MP Pin No. Pin Name Pin Description Tracking error output Tracking error 2 output Not used in this set. (Open) TEC input A GND — Ground pin for analog LDREGO REG voltage output for APC Not used in this set. (Open)
- Page 19 CDC-R30MP/X30MP • IC301 µPD703033BGC-019-8EU (MECHANISM CONTROL) (SERVO BOARD) Pin No. Pin Name Pin Description Not used in this set. (Open) DRV CONT Motor driver control signal output to the motor drive IC (IC351) Not used in this set. (Connected to ground.) Not used in this set.
- Page 20 CDC-R30MP/X30MP Pin No. Pin Name Pin Description MS CS MS chip select signal input BATT IN BATT signal input LIMIT SW LIMIT switch signal input (Inner track of pick-up) DMSCD DMSCD data signal input DCDMS DCDMS data signal output Sync clock signal input...
- Page 21 Not used in this set. (Connected to ground.) RESET System reset signal input from the SW901 CDC-R30MP: RDS clock signal input from the RDS IC (IC151) RDS CLK IN CDC-X30MP: Not used in this set. (Connected to ground.) ACC IN...
- Page 22 ST-BY MUTE Standby mute signal output to the power amp IC (IC501) POWER CONT Power control signal output CDC-R30MP: RDS data signal input from the RDS IC (IC151) RDS DI CDC-X30MP: Not used in this set. (Connected to ground.) BEEP...
-
Page 23: Block Diagram -Cd Section
CDC-R30MP/X30MP 4-2. BLOCK DIAGRAM — CD SECTION — RF AMP,DSP,DEC IC201 OPTICAL PICK-UP BLOCK CD L LOUT 127 D CD R ROUT MECHANISM CONTROL IC301 125 C PRESET OUT RESET RESET AB12 AD12/HAD12 MS CS CDS CS DRIVEW AD8/HAD8 CDS CLK... -
Page 24: Block Diagram -Main Section
CDC-R30MP/X30MP 4-3. BLOCK DIAGRAM — MAIN SECTION — AUX-RCH AUX(L) J601 BBEIN LSELO BBE OUT J401 TUN(L) L FAD RLOUT LOUT AUDIO OUT CD(L) TONE FADER FLOUT REAR S BASS R-CH POWER AMP MUTE MUTE ANT101 IC501 CON851 Q403 Q401... -
Page 25: Block Diagram -Front Section
ROTARY ENCODER WITH FRONT board SWITCH DIMMER CONTROL CHANGE LAMP+B(+9V) S601,602,605,606, Q661 Q651,671 MAIN board 608,610,612-618, S604 (CDC-R30MP) AUX board MATRIX D661 D651-653 D641-643 671-673 BACK LIGHT • Waveforms — Servo Board — Main Board (MODE: CD PLAY) — —... -
Page 26: Printed Wiring Boards -Cd Mechanism Section
CDC-R30MP/X30MP 4-6. PRINTED WIRING BOARDS — CD MECHANISM SECTION — • Refer to page 25 for Circuit Boards Location. THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary note is printed in each block.) for schematic diagram: •... - Page 27 CDC-R30MP/X30MP • Semiconductor Location Ref. No. Location (D201) D301 D511 IC201 IC202 F-11 IC301 IC302 IC351 IC501 IC511 Q201 ): SIDE B (Page 30)
-
Page 28: Schematic Diagram -Cd Mechanism Section (1/2)
CDC-R30MP/X30MP • Refer to page 25 for Waveform. 4-7. SCHEMATIC DIAGRAM — CD MECHANISM SECTION (1/2) — • Refer to page 35 for IC Block Diagrams. TC603 TC601 CON301 TC602 L201 C352 R355 R499 C202 C203 C354 R360 L351 C362... -
Page 29: Schematic Diagram -Cd Mechanism Section (2/2)
CDC-R30MP/X30MP 4-8. SCHEMATIC DIAGRAM — CD MECHANISM SECTION (2/2) — • Refer to page 25 for Waveforms. (Page 28) IC202 L241 TP82 C258 C255 C256 C251 C224 R255 TP35 R233 R254 TP36 C225 R234 R253 R252 TP37 R251 C226 TP38... -
Page 30: Printed Wiring Board -Main Section
CDC-R30MP/X30MP 4-9. PRINTED WIRING BOARD — MAIN SECTION — • Refer to page 25 for Circuit Boards Location. • Semiconductor Location Ref. No. Location Ref. No. Location Ref. No. Location D101 D804 E-10 Q103 D151 D805 D-10 Q105 D402 F-10... -
Page 31: Schematic Diagram -Main Section (1/2)
CDC-R30MP/X30MP • Refer to page 25 for Waveforms. 4-10. SCHEMATIC DIAGRAM — MAIN SECTION (1/2) — • Refer to page 35 for IC Block Diagram. Note: TU101 • Voltage is dc with respect to ground under no-signal conditions. no mark : FM... -
Page 32: Schematic Diagram -Main Section (2/2)
CDC-R30MP/X30MP 4-11. SCHEMATIC DIAGRAM — MAIN SECTION (2/2) — • Refer to page 36 for IC Block Diagrams. R403 R405 C431 R431 C413 C415 JR522 C417 IC B/D Q401 C401 C433 R433 R441 C435 JR106 C442 J401 JR101 L401 R428... -
Page 33: Printed Wiring Boards -Front Section
CDC-R30MP/X30MP 4-12. PRINTED WIRING BOARDS — FRONT SECTION — • Refer to page 25 for Circuit Boards Location. D642 D641 (Page 30) • Semiconductor Location Ref. No. Location Ref. No. Location D601 D673 D602 D681 D641 D682 D642 A-12 D643... -
Page 34: Schematic Diagram -Front Section
CDC-R30MP/X30MP 4-13. SCHEMATIC DIAGRAM — FRONT SECTION — • Refer to page 37 for IC Block Diagram. IC681 IC B/D J601 R609 R681 R608 CON601 S602 S605 R607 S604 S606 R606 S601 S611 R605 D601 D602 R610 R682 S608 S612... -
Page 35: Ic Block Diagrams
CDC-R30MP/X30MP 4-14. IC BLOCK DIAGRAMS IC351 BA5983FP (SERVO Board) STANDBY CH1,2,3 LEVEL SHIFT LEVEL SHIFT LEVEL SHIFT LEVEL SHIFT STANDBY IC302 SN74AHCT IC511 PQ1CZ21H2ZP (SERVO Board) (SERVO Board) CONSTANT OVERHEAT DETECTION CIRCUIT VOLTAGE CIRCUIT ERROR AMP PWM AMP VREF OSCILLATOR... - Page 36 CDC-R30MP/X30MP IC401 LA2657M (MAIN Board) TONE AUX(L) CCB INTERFACE FADER S BASS CH(L) F-SW TUNE(L) RROUT FADER CD(L) FROUT V REF VREF BBE IN(L) CH(R) CBPL TUNE(R) F-SW CH(R) HPOL AUX(R) CLPL LPOL RSELO MIXL RTRE BBE OUT(L) TONE RBASS...
- Page 37 CDC-R30MP/X30MP IC501 TA8272H (MAIN Board) MUTE ST-BY V REF PRE GND AUX IN DIAGNOSIS FR(-) GND FR(+) RR(-) GND RR(+) RL(+) GND RL(-) FL(-) GND FL(-) IC681 SBX1971-52P (FRONT Board) HEAD AMP LIMITER AMP IMTEGRATOR DETECTER HYSTERESLS & COMPARATOR COMPARATOR...
-
Page 38: Exploded Views
CDC-R30MP/X30MP SECTION 5 EXPLODED VIEWS NOTE: • The mechanical parts with no reference • Color Indication of Appearance Parts The components identified by mark 0 or dotted line with mark number in the exploded views are not supplied. Example : 0 are critical for safety. -
Page 39: Front Panel Section
CDC-R30MP/X30MP 5-2. FRONT PANEL SECTION not supplied (FRONT board) not supplied (AUX board) supplied not supplied supplied supplied not supplied not supplied supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark X-3383-823-1 PANEL (SVX) ASSY (X30MP) -
Page 40: Cd Mechanism Section (1)
CDC-R30MP/X30MP 5-3. CD MECHANISM SECTION (1) (MG-930M-185) not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark X-3383-095-1 CHASSIS ASSY, HOLDER CNF 3-250-987-01 SCREW (CD HLDR), SPECIAL 1-687-801-11 FF-CABLE BOARD 3-251-005-01 SPRING (CLAMP), LEAF 1-687-802-11 PIC2 FLEXIBLE BOARD... -
Page 41: Cd Mechanism Section (2)
CDC-R30MP/X30MP Ver 1.1 5-4. CD MECHANISM SECTION (2) (MG-930M-185) supplied supplied The components identified by Les composants identifiés par une mark 0 or dotted line with mark marque 0 sont critiques pour 0 are critical for safety. la sécurité. Replace only with part number Ne les remplacer que par une piéce... -
Page 42: Electrical Parts List
CDC-R30MP/X30MP SECTION 6 FRONT ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in • Items marked “*” are not stocked since The components identified by mark 0 or dotted line with mark the parts list may be different from the they are seldom required for routine service. - Page 43 CDC-R30MP/X30MP FRONT MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R681 1-216-820-11 METAL CHIP 1/10W C122 1-164-245-11 CERAMIC CHIP 0.015uF R682 1-216-821-11 METAL CHIP 1/10W (R30MP) C123 1-113-619-11 CERAMIC CHIP 0.47uF < SWITCH > C124 1-113-619-11 CERAMIC CHIP 0.47uF...
- Page 44 CDC-R30MP/X30MP MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C461 1-126-162-11 ELECT 3.3uF C930 1-162-964-11 CERAMIC CHIP 0.001uF C498 1-164-156-11 CERAMIC CHIP 0.1uF C932 1-162-966-11 CERAMIC CHIP 0.0022uF 10% C501 1-107-823-11 CERAMIC CHIP 0.47uF C933 1-125-701-11 DOUBLE LAYERS 0.047F...
- Page 45 CDC-R30MP/X30MP MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < IC > JR526 1-216-296-11 SHORT CHIP JR527 1-216-296-11 SHORT CHIP IC151 8-759-065-98 IC SAA6579T (R30MP) JR528 1-216-296-11 SHORT CHIP IC401 6-703-687-01 IC LA2657M JR529 1-216-296-11 SHORT CHIP...
- Page 46 CDC-R30MP/X30MP MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Q411 8-729-043-30 TRANSISTOR PDTC114TK-115 R405 1-216-828-11 METAL CHIP 3.9K 1/10W Q451 8-729-422-33 TRANSISTOR 2PD601A-Q-TX R406 1-216-828-11 METAL CHIP 3.9K 1/10W Q701 1-801-806-11 TRANSISTOR DTC144EKA R407 1-216-841-11 METAL CHIP...
- Page 47 CDC-R30MP/X30MP MAIN SERVO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R724 1-216-821-11 METAL CHIP 1/10W R957 1-216-821-11 METAL CHIP 1/10W R725 1-216-821-11 METAL CHIP 1/10W R958 1-216-821-11 METAL CHIP 1/10W R726 1-216-821-11 METAL CHIP 1/10W...
- Page 48 CDC-R30MP/X30MP SERVO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C243 1-107-826-11 CERAMIC CHIP 0.1uF < DIODE > C244 1-110-449-11 ELECT CHIP 47uF 6.3V C245 1-162-964-11 CERAMIC CHIP 0.001uF D201 8-719-066-11 DIODE 1PS184-115 C246 1-107-826-11 CERAMIC CHIP 0.1uF...
- Page 49 CDC-R30MP/X30MP SERVO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R239 1-216-830-11 METAL CHIP 5.6K 1/10W R319 1-216-845-11 METAL CHIP 100K 1/10W R240 1-218-847-11 METAL CHIP 0.5% 1/10W R320 1-216-845-11 METAL CHIP 100K 1/10W R241 1-218-847-11 METAL CHIP 0.5%...
- Page 50 CDC-R30MP/X30MP Ver 1.1 SERVO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R414 1-216-821-11 METAL CHIP 1/10W ACCESSORIES R415 1-216-821-11 METAL CHIP 1/10W ************ R416 1-216-821-11 METAL CHIP 1/10W R417 1-216-821-11 METAL CHIP 1/10W 1-477-833-11 COMMANDER, CARD (RM-Z303)
- Page 51 CDC-R30MP/X30MP MEMO...
- Page 52 CDC-R30MP/X30MP REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2003. 05 2003.