Touch Panel Adjust - Sony XAV-712HD Operating Instructions Manual
Av center sony xav-712hd/ xav-602bt
Hide thumbs
Also See for XAV-712HD:
- Owner's record (65 pages) ,
- User manual (6 pages) ,
- Operating instructions manual (58 pages)
Table of Contents
Advertisement
Available languages
Available languages
Auto OFF
Shuts off automatically after a desired time when
no source is selected.
Unit status: Any status
Option
Purpose
OFF (), 30 sec,
To select the desired time to shut
30 min, 60 min
off the unit or deactivate the
Auto OFF function.
Demo
Unit status: Any status
Option
Purpose
ON (), OFF
To activate the demonstration.
Beep
Unit status: Any status
Option
Purpose
ON (), OFF
To activate the operation sound.
Front Panel Caution Alarm
(XAV-602BT only)
Unit status: Any status
Option
Purpose
ON (), OFF
To activate the caution alarm.
Rotary Commander
Changes the operative direction of rotary
commander controls.
Unit status: Any status
Option
Purpose
Default ()
To use in the factory-set
position.
Reverse
To use on the right side of the
steering column.
Key Illumination
Unit status: Any status
Option
Purpose
Rainbow ()
To change the color of the
(12 preset
buttons on the unit to match the
colors,
car's interior.
customized
color and 5
preset patterns)
26
GB
Touch Panel Adjust
Unit status: Any status
Option
Purpose
–
To adjust the touch panel
calibration if the touching
position does not correspond
with the proper item.
Camera Input
Unit status: Any status
Option
Purpose
OFF
To deactivate the input.
Normal ()
To display the picture from the
rear view camera.
Reverse
To flip the picture from the rear
view camera horizontally.
Rear View Camera Setting
Displays setting items on the picture from the rear
view camera to assist driving.
This setting is available only when:
[Camera Input] is set to [Normal] or [Reverse].
the parking brake is applied.
Unit status: Any status
Option
Purpose
To display the marker lines.
Touch again to hide the marker
lines.
To adjust the length and/or
position of the marker lines.
Output Color System
Unit status: No source selected
Option
Purpose
NTSC (), PAL
To change the color system
according to the connected
monitor. (SECAM is not
supported.)
Bluetooth Connection
Unit status: Any status
Option
Purpose
ON, OFF ()
To activate the BLUETOOTH
signal.
Hide quick links:
Advertisement
Chapters
Table of Contents
