Setting The Color Temperature Manually - Sony PDW-510 Operation Manual
Hide thumbs
Also See for PDW-510:
- Operation manual (208 pages) ,
- Brochure (28 pages) ,
- Brochure & specs (18 pages)
Table of Contents
Advertisement
2
Turn the MENU knob to move the b mark to
"OPERATION", then press the MENU knob.
If this is the first time the OPERATION menu has been
displayed, the CONTENTS page appears. If the menu
has been used before, the last accessed page appears.
3
If the CONTENTS page is displayed, turn the MENU
knob to move the b mark to POWER SAVE, then
press the MENU knob.
If a different page is displayed, turn the MENU knob
until the POWER SAVE page appears, then press the
MENU knob.
The POWER SAVE page appears. The current
settings appear on the right side of each item.
04 POWER SAVE
i.LINK OUT
REC AUDIO OUT
NETWORK/THUMB
Item
Setting
i.LINK OUT
Enable or disable i.LINK (AV/C) OUT.
REC AUDIO OUT
Select whether to output E-E signals
or no audio from the AUDIO OUT
connector during recording.
NETWORK/
Select whether to permanently enable
THUMB
the CBK-NC01 (option) and thumbnail
display, or to disable them in power
saving mode.
4
Move the b mark to "i.LINK OUT", then press the
MENU knob.
The b mark changes to a z mark, and the z mark
changes to a ? mark.
5
Turn the MENU knob to select "ENABL", then press
the MENU knob.
The setting is confirmed. The z mark changes to a b
mark and the ? mark changes to a z mark.
6
To end the menu operation, set the MENU ON/OFF
switch to OFF.
7-3-3 Setting the Color Temperature
Manually
You can adjust the value of the white balance manually by
setting the color temperature.
Proceed as follows.
TOP
:
DSABL
:
EE
:
SAVE
1
Holding down the MENU knob, move the MENU ON/
OFF switch to ON.
The TOP menu appears.
2
Turn the MENU knob to move the b mark to
"PAINT", and press the MENU knob.
If this is the first time the PAINT menu has been
displayed, the CONTENTS page appears. If the menu
has been used before, the last accessed page appears.
3
If the CONTENTS page is displayed, turn the MENU
knob to move the b mark to "WHITE", and press the
MENU knob to display the WHITE page.
If a different page is displayed, turn the MENU knob
until the WHITE page appears, and press the MENU
knob to select the page.
P02 WHITE
COLOR TEMP
COLOR FINE
R GAIN
B GAIN
D5600K
COLOR TEMP
COLOR FINE
R GAIN
B GAIN
D5600K
Item
Description
COLOR TEMP
Sets the color temperature for the
<A>
desired value. Adjust the value while
looking at the real image because error
tends to be bigger for adjustment of
high color temperature.
COLOR FINE <A> Adjusts the value more precisely when
the color temperature adjustment
through COLOR TEMP is not
satisfactory.
R GAIN <A>
Only the value of R GAIN is changed.
B GAIN <A>
Only the value of B GAIN is changed.
D5600K
Sets the color temperature to
approximately 5600 K.
The above table shows the adjustment of the white
balance of channel A.
Items followed by "<B>" are used to adjust the white
balance of channel B.
4
Turn the MENU knob to move the b mark to the item
you want to set, and press MENU knob.
The b mark on the left of the selected item changes to
a z mark and the z mark on the left of the setting
changes to a ? mark.
5
Turn the MENU knob to change the setting, and press
the MENU knob.
7-3 Adjustments and Settings From Menus
<A>:
3200
<A>:
0
<A>:
0
<A>:
0
<A>:
OFF
<B>:
3200
<B>:
0
<B>:
0
<B>:
0
:
OFF
135
Advertisement
Table of Contents
