Advertisement
Quick Links
iR Security Kit – A1P/A1U
When installing the iR Security Kit - A1P/A1U, follow the instructions given in this manual.
1
Package Check
Open the package of iR Security Kit - A1P/A1U and check that the following items are enclosed:
[1] Protect key device - Parallel (for A1P) ....... 1 pc.
[2] Protect key device - USB (for A1U) ........... 1 pc.
[3] iR Series Security System Setup Tool
CD-ROM ..................................................... 1 pc.
About storing the protect key devices and CD-ROM after use
Instruct the user to store the protect key devices and iR Series Security System Setup Tool CD-
ROM securely because they are necessary for enabling the Security Option again when the option
is disabled by an operational error in Service mode or other. A protect key device is available only
for a copier where the device was used once. Once a protect key device has been damaged by static
electricity or lost, the Security Option can no longer be set. To prevent this problem, instruct the
user to keep each protect key device in a conductive bag.
About handling the protect key devices
To protect the protect key devices from static electricity, note the following:
• When install the devices, wear a ground wrist strap. If no grounding facility is available, connect
the ground terminal of the wrist strap to the frame of the copier.
• Keep each protect key device in a conductive bag and take it out immediately before use.
• Do not touch the connector terminals of a protect key device.
Installation Manual
Fig. 1-1
– 2 –
[4] User's Guide ............................................... 1 pc.
[5] Serial number label ..................................... 1 pc.
Advertisement
Related Manuals for Canon iR Security Kit-A1P
Summary of Contents for Canon iR Security Kit-A1P
- Page 1 iR Security Kit – A1P/A1U Installation Manual When installing the iR Security Kit - A1P/A1U, follow the instructions given in this manual. Package Check Open the package of iR Security Kit - A1P/A1U and check that the following items are enclosed: Fig.
- Page 2 7) For use through a network connection, set an ap- Preparation propriate network connection to enable communi- cation between the copier and PC. If the network Necessary Materials connection is changed, turn the PC power and copier a. Parallel connection power off and on.
- Page 3 4) Click Finish to complete the installation. 5) Click Continue. Fig. 2-3 Installing the iR Series Security System Setup Tool Fig. 2-6 1) Insert the enclosed iR Series Security System Setup Tool CD-ROM into the PC CD-ROM drive. 6) Click Finish to complete the installation. 2) Double-click the Setup.exe file on the CD-ROM.
- Page 4 4) For parallel connection, select bi-Centronics and Security Option Addition Proce- click OK. For network connection, select Network, dure enter the IP address of the copier, and click OK. Adding the Security Option 1) Enter Service mode and press COPIER - Option - FUNCTIN - DOWNLOAD - OK to make the copier ready for download.
- Page 5 7) Click END. 1) Check the user request and set each item in Service Mode accordingly. After the following setting, choices for the Security Option are displayed in User Mode. • For iR C3200/C3200S/C3200N, S3200, CLC3200, imageRUNNER C3200 The items are displayed in Level-2 Service Mode.
- Page 6 • Job Log Display <Function> Set whether or not to display the history of copying, fax communication, and printing. <Service Mode items> COPIER > Option > USER > LGSW-DSP <Setting range/Operation> 0: Do not display in User Mode (Default) 1: Display in User Mode Change the set value from 0 to 1.