Table of Contents
Advertisement
10-3 Error Messages
This unit is equipped with a self-diagnosis function, and if
a problem is detected, displays an error message in the time
data display and on the monitor.
If an error message appears, contact your Sony service
representative.
Indications in the time data display
If a problem is detected, the ALARM indicator lights in the
display window, and an error code appears in time data
display area.
CHARACTR
ON
PB/EE
PB
ALARM
CONFI
DISABLE
CTL/TC
CTL
59.94i
ASSEMBLE
OFF
VIUC
DF
TCG SET
E14-001
HOME
Error Message List
Code
Message
01
REEL TROUBLE
02
REEL TROUBLE
03
REEL TROUBLE
04
REEL TROUBLE
05
REEL TROUBLE
06
TAPE TENSION
07
CAPSTAN TROUBLE
08
DRUM TROUBLE
09
TH/UNTH MOTOR
0A
THREADING
10
HUMID
12
TAPE TOP SENSOR
13
TAPE END SENSOR
14
FAN MOTOR
20
CASS COMP MOTOR
92
INTERNAL I/F1
80
Error Messages
COND
SDI
INT- PRE F-RUN
REM:
M
Description
Tape slacking has been detected in the threading or unthreading operation.
Tape slacking or tape breaking has been detected in the SEARCH, FF, or REW mode.
Tape slacking, tape breaking, or supply or take-up reel locking has been detected in the REC
or PLAY mode.
A malfunctional tape transport speed has been detected in the FF or REW mode.
A malfunctional operation of the supply or take-up reel has been detected during cassette
insertion.
Excessive tape tension has been detected in the REC or PLAY mode.
Malfunction of capstan motor has been detected.
Malfunction of drum motor has been detected.
Malfunction of threading or unthreading operation has been detected.
The tape top processing has not been completed in the threading mode.
Dew condensation has been detected.
Malfunction of tape top sensor has been detected.
Malfunction of tape end sensor has been detected.
Malfunction of cooling fan motor has been detected.
Malfunction of cassette compartment-up or down operation has been detected.
Abnormality in the interface between SYS CPU (on SY-320 board) and SYS NV-RAM
(SY-320 board) has been detected.
Indications on the monitor
The error message and code also appear superimposed on
a monitor connected to the COMPOSITE OUT 2 (SUPER)
connector, HD SDI OUTPUT (SUPER) connectors, or SDI
OUT 2 (SUPER) connector. Depending on the error code,
an indication of the source of the problem may appear as a
secondary error message.
ERROR-01
REEL TROUBLE-1
Error message displays
• To display error messages and codes superimposed on
the monitor, set the CHARACTR on the HOME page of
the function menu to ON.
• Some error messages have no associated error codes. In
this case, they appear in the time data display.
• Error messages with error codes are saved in NV-RAM
(non-volatile memory) as an error log.
• In some cases the error message is slightly different on
the monitor and in the time data display.
- Quick Links:
- Error Messages
Hide quick links:
Advertisement
Table of Contents
