Table of Contents
Advertisement
COPIER (Service mode for printer) > OPTION (Specification setting mode) > NETWORK
NS-NTLM
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
NS-PLNWS
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
NS-PLN
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
2
Limit NTLM auth method at SMTP auth
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To restrict use of NTLM authentication method at the time of SMTP authentication.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: SMTP server-dependent, 1: Not used
0
SMTP authentication: Protocol in which user authentication function is added to SMTP, which is
the protocol to be used for e-mail transmission. At the time of e-mail transmission, this protocol
executes authentication of the user account and the password between the SMTP server and the
user to approve e-mail transmission only when it's authenticated.
2
Limit plaintext auth at SMTP auth encry
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To restrict use of PLAIN/LOGIN authentication, which is plaintext, at the time of SMTP
authentication under the environment where the communication packet is encrypted.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: SMTP server-dependent, 1: Not used
0
SMTP authentication: Protocol in which user authentication function is added to SMTP, which is
the protocol to be used for e-mail transmission. At the time of e-mail transmission, this protocol
executes authentication of the user account and the password between the SMTP server and the
user to approve e-mail transmission only when it's authenticated.
2
Limit plaintext auth at SMTPauth noencry
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To restrict use of PLAIN/LOGIN authentication, which is plaintext, at the time of SMTP
authentication under the environment where the communication packet is not encrypted.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: SMTP server-dependent, 1: Not used
0
SMTP authentication: Protocol in which user authentication function is added to SMTP, which is
the protocol to be used for e-mail transmission. At the time of e-mail transmission, this protocol
executes authentication of the user account and the password between the SMTP server and the
user to approve e-mail transmission only when it's authenticated.
770
8. Service Mode
Advertisement
Table of Contents
Troubleshooting
