hit counter script
ABB Relion 670 Series Product Manual
  1. Manuals
  2. Brands
  3. ABB Manuals
  4. Protection Device
  5. Relion 670 series
  6. Product manual

ABB Relion 670 Series Product Manual

Line differential protection
Hide thumbs Also See for Relion 670 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
®
Relion
670 series
Line differential protection RED670 2.0
Product guide

Advertisement

Table of Contents
loading

Related Manuals for ABB Relion 670 Series

Summary of Contents for ABB Relion 670 Series

  • Page 1 ® Relion 670 series Line differential protection RED670 2.0 Product guide...

  • Page 2: Table Of Contents

    Disclaimer The information in this document is subject to change without notice and should not be construed as a commitment by ABB. ABB assumes no responsibility for any errors that may appear in this document. Drawings and diagrams are not binding.

  • Page 3: Application

    Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Issued: July 2016 Revision: C 1. Application Disturbance recording and fault locator are available to allow RED670 is used for the protection, control and monitoring of independent post-fault analysis after primary disturbances. The overhead lines and cables in all types of networks.
  • Page 4 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Description of configuration A31 RED670 A31 – Single Breaker with Three phase tripping 12AI (6I+6U) WA2_VT VN MMXU WA1_VT VN MMXU 1→0 0→1 SC/VC SMP PTRC SMB RREC SES RSYN LINE_CT θ>...
  • Page 5 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Description of configuration A32 RED670 A32 – Single Breaker with Single phase tripping 12AI (6I+6U) WA2_VT VN MMXU WA1_VT VN MMXU 1→0 0→1 SC/VC SMP PTRC SMB RREC SES RSYN LINE_CT θ>...
  • Page 6 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Description of configuration B31 RED670 B31 – Multi Breaker with Three phase tripping 12AI (6I+6U) WA1_VT WA1_CT 50BF 3I>BF VN MMXU CC RBRF 50BF 3I>BF WA1_QA1 CC RBRF REM CT1 REM CT2 WA1_QB6 3Id/I>...
  • Page 7 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Description of configuration B32 RED670 B32 – Multi Breaker with Single phase tripping 12AI (6I+6U) WA1_VT WA1_CT 52PD 50BF 3I>BF CC PDSC VN MMXU CC RBRF 50BF 3I>BF 52PD WA1_QA1 CC RBRF CC PDSC REM CT1...

  • Page 8: Available Functions

    Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 2. Available functions Main protection functions = number of basic instances = option quantities 3-A03 = optional function included in packages A03 (refer to ordering details)

  • Page 9: Differential Protection

    Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 IEC 61850 ANSI Function description Line Differential RED670 Differential protection HZPDIF 1Ph high impedance differential protection 3-A02 3-A02 3-A02 3-A02 REFPDIF Restricted earth fault protection, low impedance 0–2 L3CPDIF Line differential protection, 3 CT sets, 2–3 line ends L6CPDIF Line differential protection, 6 CT sets, 3–5 line ends 1-A04...
  • Page 10 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 IEC 61850 ANSI Function description Line Differential RED670 ZMRPSB Power swing detection 1-B11 1-B11 1-B11 1-B11 1-B16 1-B16 1-B16 1-B16 PSLPSCH Power swing logic 1-B03 1-B03 1-B03 1-B03 PSPPPAM Pole slip/out-of-step protection 1-B22 1-B22 1-B22...

  • Page 11: Current Protection

    Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Back-up protection functions IEC 61850 ANSI Function description Line Differential RED670 Current protection PHPIOC Instantaneous phase overcurrent protection OC4PTOC Four step phase overcurrent protection 51_67 EFPIOC Instantaneous residual overcurrent 1-C24 1-C24 1-C24 1-C24...

  • Page 12: Multipurpose Protection

    Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 IEC 61850 ANSI Function description Line Differential RED670 SAPFRC Rate-of-change frequency protection 2-E02 2-E02 2-E02 2-E02 Multipurpose protection CVGAPC General current and voltage protection 4-F01 4-F01 4-F01 4-F01 General calculation SMAIHPAC Multipurpose filter 67 requires voltage...

  • Page 13: Secondary System Supervision

    Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Control and monitoring functions IEC 61850 ANSI Function description Line Differential RED670 Control SESRSYN Synchrocheck, energizing check and synchronizing SMBRREC Autorecloser 1-H04 2-H05 1-H04 2-H05 APC8 Apparatus control for single bay, max 8 apparatuses (1CB) 1-H07 1-H07 incl.
  • Page 14 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 IEC 61850 ANSI Function description Line Differential RED670 AND, OR, INV, Configurable logic blocks 40-280 40-280 40-280 40-280 40-280 PULSETIMER, GATE, TIMERSET, XOR, LLD, SRMEMORY, RSMEMORY ANDQT, ORQT, Configurable logic blocks Q/T 0–1 INVERTERQT, XORQT,...
  • Page 15 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 IEC 61850 ANSI Function description Line Differential RED670 DRPRDRE, Disturbance report A1RADR, A2RADR, A3RADR, A4RADR, B1RBDR, B2RBDR, B3RBDR, B4RBDR, B5RBDR, B6RBDR SPGAPC Generic communication function for Single Point indication SP16GAPC Generic communication function for Single Point indication 16 inputs MVGAPC...
  • Page 16 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Communication IEC 61850 ANSI Function description Line Differential RED670 Station communication LONSPA, SPA SPA communication protocol LON communication protocol HORZCOMM Network variables via LON PROTOCOL Operation selection between SPA and IEC 60870-5-103 for SLM RS485PROT Operation selection for RS485...

  • Page 17: Scheme Communication

    Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 IEC 61850 ANSI Function description Line Differential RED670 FRONT, LANABI, Ethernet configuration of links LANAB, LANCDI, LANCD GATEWAY Ethernet configuration of link one OPTICAL103 IEC 60870-5-103 Optical serial communication RS485103 IEC 60870-5-103 serial communication for RS485 AGSAL...
  • Page 18 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 IEC 61850 ANSI Function description Line Differential RED670 ZCLCPSCH Local acceleration logic 1-B11 1-B11 1-B11 1-B11 ECPSCH Scheme communication logic for residual 1-C24 1-C24 1-C24 1-C24 overcurrent protection ECRWPSCH Current reversal and weak-end infeed 1-C24 1-C24 1-C24...
  • Page 19 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Basic IED functions Table 1. Basic IED functions IEC 61850 or function Description name INTERRSIG Self supervision with internal event list SELFSUPEVLST Self supervision with internal event list TIMESYNCHGEN Time synchronization module SYNCHBIN, Time synchronization SYNCHCAN,...
  • Page 20 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 1. Basic IED functions, continued IEC 61850 or function Description name ALTRK Service tracking ACTIVLOG Activity logging parameters FSTACCS Field service tool access via SPA protocol over ethernet communication PCMACCS IED Configuration Protocol SECALARM...
  • Page 21 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 power transformers and cables. Under the condition that there The three-terminal version is used for conventional two-terminal are no in-line or tap (shunt) power transformers within the zone lines with or without a 1½ circuit breaker arrangement in one of protection, it offers a phase-segregated fundamental end, as well as three-terminal lines with single breaker frequency current based differential protection with high...
  • Page 22 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Protected zone Comm. Channel Comm. Channel Comm. Channel IEC05000042_2_en.vsd IEC05000042 V2 EN Figure 8. Example of application on a three-terminal line with an in-line power transformer in the protection zone master, and each one of the slave IEDs.
  • Page 23 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Current samples from IEDs located geographically apart from The communication link is continuously monitored, and an each other, must be time coordinated so that the current automatic switchover to a standby link is possible after a preset differential algorithm can be executed correctly.
  • Page 24 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 The independent measurement of impedance for each fault Built-in adaptive load compensation algorithm for the loop together with a sensitive and reliable built-in phase quadrilateral function prevents overreaching of zone1 at load selection makes the function suitable in applications with exporting end at phase to earth-faults on heavily loaded power single-phase autoreclosing.
  • Page 25 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 The independent measurement of impedance for each fault The Full-scheme distance protection, quadrilateral for earth loop together with a sensitive and reliable phase selection fault functions have functionality for load encroachment, which makes the function suitable in applications with single phase increases the possibility to detect high resistive faults on heavily autoreclosing.
  • Page 26 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Faulty phase identification with load encroachment FMPSPDIS The ability to accurately and reliably classify different types of fault so that single phase tripping and autoreclosing can be Forward used plays an important roll in today's power systems. operation The phase selection function is design to accurately select the proper fault loop(s) in the distance function dependent on the...
  • Page 27 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 The extensive output signals from the phase selection gives Distance zones quad with high speed distance for series also important information about faulty phase(s) which can be compensated networks ZMFCPDIS used for fault analysis.
  • Page 28 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Occurrence of earth-fault currents during a power swing Automatic switch onto fault logic, voltage and current based inhibits the ZMRPSB function, to allow fault clearance. ZCVPSOF Automatic switch onto fault logic (ZCVPSOF) is a function that Power swing logic PSLPSCH gives an instantaneous trip at closing of breaker onto a fault.
  • Page 29 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 EF4PTOC can be used as main protection for phase-to-earth Thermal overload protection, one time constant LCPTTR/ faults. LFPTTR The increasing utilization of the power system closer to the EF4PTOC can also be used to provide a system back-up for thermal limits has generated a need of a thermal overload example, in the case of the primary protection being out of protection for power lines.
  • Page 30 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 UV2PTUV has two voltage steps, each with inverse or definite Pole discordance protection CCPDSC time delay. An open phase can cause negative and zero sequence currents which cause thermal stress on rotating machines and can UV2PTUV has a high reset ratio to allow settings close to cause unwanted operation of zero sequence or negative system service voltage.
  • Page 31 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Radial feeder protection PAPGAPC Overfrequency protection SAPTOF The PAPGAPC function is used to provide protection of radial Overfrequency protection function SAPTOF is applicable in all feeders having passive loads or weak end in-feed sources. It is situations, where reliable detection of high fundamental power possible to achieve fast tripping using communication system system frequency is needed.
  • Page 32 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 9. Secondary system supervision • Distance protection function. • Undervoltage function. Current circuit supervision CCSSPVC • Energisation function and voltage check for the weak Open or short circuited current transformer cores can cause infeed logic.
  • Page 33 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Up to five three-phase reclosing attempts can be included by Each apparatus control function has interlocking modules parameter setting. The first attempt can be single-, two and/or included for different switchyard arrangements, where each three phase for single phase or multi-phase faults respectively.
  • Page 34 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 LOCREMCTRL to the Bay control QCBAY function block. The 11. Scheme communication parameter ControlMode in function block LOCREM is set to Scheme communication logic for distance or overcurrent choose if the switch signals are coming from the local HMI or protection ZCPSCH from an external hardware switch connected via binary inputs.
  • Page 35 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 enough to ensure that no unwanted operation will occur as a Current reversal and weak-end infeed logic for residual result of the current reversal. overcurrent protection ECRWPSCH The Current reversal and weak-end infeed logic for residual On verification of a weak end infeed condition, the weak end overcurrent protection ECRWPSCH is a supplement to Scheme infeed logic provides an output for sending the received...

  • Page 36: Logic

    Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Compensated over and undervoltage protection COUVGAPC • Phase wise start and trip signals Compensated over and undervoltage protection (COUVGAPC) • Overcurrent protection function calculates the remote end voltage of the transmission •...

  • Page 37: Monitoring

    Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Extension logic package Integer to Boolean 16 conversion IB16 The logic extension block package includes additional trip Integer to boolean 16 conversion function IB16 is used to matrix logic and configurable logic blocks. transform an integer into a set of 16 binary (logical) signals.
  • Page 38 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Disturbance report DRPRDRE, always included in the IED, Event recorder DRPRDRE acquires sampled data of all selected analog input and binary Quick, complete and reliable information about disturbances in signals connected to the function block with a, maximum of 40 the primary and/or in the secondary system is vital, for example, analog and 96 binary signals.

  • Page 39: Metering

    Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Especially on heavily loaded long lines, where the source Event function voltage angles can be up to 35-40 degrees apart, the accuracy When using a Substation Automation system with LON or SPA can be still maintained with the advanced compensation communication, time-tagged events can be sent at change or included in fault locator.

  • Page 40: Human Machine Interface

    IEDs. The LHMI is used for setting, monitoring and controlling. SPA communication protocol A single glass or plastic port is provided for the ABB SPA protocol. This allows extensions of simple substation 16. Basic IED functions automation systems but the main use is for Substation Monitoring Systems SMS.

  • Page 41: Remote Communication

    Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 with unsolicited events, time synchronizing and disturbance 19. Hardware description reporting is provided for communication to RTUs, Gateways or Hardware modules HMI systems. Power supply module PSM The power supply module is used to provide the correct internal Multiple command and transmit voltages and full isolation between the IED and the battery When IEDs are used in Substation Automation systems with...
  • Page 42 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 communication (SPA, IEC 60870-5-103 and DNP3 port) and High impedance resistor unit one port is dedicated for LON communication. The high impedance resistor unit, with resistors for pick-up value setting and a voltage dependent resistor, is available in a Line data communication module LDCM single phase unit and a three phase unit.
  • Page 43 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 IEC06000182-2-en.vsd IEC06000182 V2 EN Figure 19. A 1/2 x 19” size IED side-by-side with RHGS6. xx08000165.vsd IEC08000165 V1 EN Figure 18. Case with rear cover and 19” rack mounting kit Case size (mm)/(inches) 6U, 1/2 x 19”...

  • Page 44: Connection Diagrams

    DVD as part of the product delivery. Connection diagram, RED670 2.0, A32 1MRK002803-DC The latest versions of the connection diagrams can be downloaded from http://www.abb.com/substationautomation. Connection diagram, RED670 2.0, B32 1MRK002803-DD Connection diagrams for Customized products Connection diagram, 670 series 2.0...

  • Page 45: Technical Data

    Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 21. Technical data General Definitions Reference value The specified value of an influencing factor to which are referred the characteristics of the equipment Nominal range The range of values of an influencing quantity (factor) within which, under specified conditions, the equipment meets the specified requirements Operative range The range of values of a given energizing quantity for which the equipment, under specified conditions, is able to perform its...
  • Page 46 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 4. MIM - mA input module Quantity: Rated value: Nominal range: Input resistance = 194 Ohm Input range ± 5, ± 10, ± 20mA 0-5, 0-10, 0-20, 4-20mA Power consumption each mA-board £...
  • Page 47 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Binary inputs and outputs Table 7. BIM - Binary input module Quantity Rated value Nominal range Binary inputs DC voltage, RL 24/30 V RL ±20% 48/60 V RL ±20% 110/125 V RL ±20% 220/250 V RL ±20%...
  • Page 48 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 9. IOM - Binary input/output module Quantity Rated value Nominal range Binary inputs DC voltage, RL 24/30 V RL ±20% 48/60 V RL ±20% 110/125 V RL ±20% 220/250 V RL ±20% Power consumption 24/30 V, 50 mA...
  • Page 49 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 11. IOM with MOV and IOM 220/250 V, 110mA - contact data (reference standard: IEC 61810-2) Function or quantity Trip and Signal relays Fast signal relays (parallel reed relay) Binary outputs IOM: 10 IOM: 2...
  • Page 50 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 13. SOM - Static Output module data (reference standard: IEC 61810-2): Electromechanical relay outputs Function of quantity Trip and signal relays Max system voltage 250 V AC/DC Number of outputs Test voltage across open contact, 1 min 1000 V rms Current carrying capacity:...
  • Page 51 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 16. Auxiliary DC supply voltage influence on functionality during operation Dependence on Reference value Within nominal Influence range Ripple, in DC auxiliary voltage max. 2% 15% of EL 0.01% / % Operative range Full wave rectified Auxiliary voltage dependence, operate...
  • Page 52 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Type tests according to standards Table 18. Electromagnetic compatibility Test Type test values Reference standards 1 MHz burst disturbance 2.5 kV IEC 60255-26 100 kHz slow damped oscillatory wave immunity test 2.5 kV IEC 61000-4-18, Class III Ring wave immunity test, 100 kHz...
  • Page 53 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 20. Environmental tests Test Type test value Reference standard Cold operation test Test Ad for 16 h at -25°C IEC 60068-2-1 Cold storage test Test Ab for 16 h at -40°C IEC 60068-2-1 Dry heat operation test Test Bd for 16 h at +70°C...
  • Page 54 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Differential protection Table 23. Restricted earth-fault protection, low impedance REFPDIF Function Range or value Accuracy Operate characteristic Adaptable ± 1.0% of I for I ≤ I ± 1.0% of I for I > I Reset ratio >95% Minimum pickup...
  • Page 55 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 25. Line differential protection L3CPDIF, L6CPDIF, LT3CPDIF, LT6CPDIF Function Range or value Accuracy Minimum operate current (20-200)% of IBase ±1.0% of I at I ≤ I ±1.0% of I at I > I SlopeSection2 (10.0-50.0)% SlopeSection3...
  • Page 56 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 25. Line differential protection L3CPDIF, L6CPDIF, LT3CPDIF, LT6CPDIF , continued Function Range or value Accuracy **Operate time, unrestrained Min. = 10 ms negative sequence function Max. = 20 ms **Reset time, unrestrained negative Min.
  • Page 57 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Impedance protection Table 27. Distance measuring zone, Quad ZMQPDIS Function Range or value Accuracy Number of zones Max 5 with selectable direction Minimum operate residual (5-1000)% of IBase current, zone 1 Minimum operate current, phase- (10-1000)% of IBase to-phase and phase-to-earth...
  • Page 58 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 28. Distance measuring zone, quadrilateral characteristic for series compensated lines ZMCPDIS, ZMCAPDIS Function Range or value Accuracy Number of zones Max 5 with selectable direction IBase Minimum operate residual (5-1000)% of current, zone 1 IBase...
  • Page 59 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 30. Full-scheme distance protection, Mho characteristic ZMHPDIS Function Range or value Accuracy Number of zones, Ph-E Minimum operate current (10–30)% of IBase Positive sequence impedance, ± 2.0% static accuracy (0.005–3000.000) W/phase Ph-E loop Conditions:...
  • Page 60 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 32. Faulty phase identification with load encroachment FMPSPDIS Function Range or value Accuracy Load encroachment criteria: Load ±2.0% static accuracy (1.00–3000.00) W/phase resistance, forward and reverse (5–70) degrees Conditions: Voltage range: (0.1–1.1) x U Current range: (0.5–30) x I Angle: at 0 degrees and 85 degrees...
  • Page 61 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 34. Phase selection with load encroachment, quadrilateral characteristic FRPSPDIS Function Range or value Accuracy Minimum operate current (5-500)% of IBase ±1.0% of I at I ≤ I ±1.0% of I at I > I Reactive reach, positive (0.50–3000.00) Ω/phase ±2.0% static accuracy...
  • Page 62 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 36. Power swing detection ZMRPSB Function Range or value Accuracy Reactive reach ± 2.0% static accuracy (0.10-3000.00) W/phase Conditions: Voltage range: (0.1-1.1) x U Current range: (0.5-30) x I Angle: at 0 degrees and 85 degrees Resistive reach (0.10–1000.00) W/loop...
  • Page 63 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 40. Phase preference logic PPLPHIZ Function Range or value Accuracy Operate value, phase-to-phase (1 - 100)% of UBase ±0.5% of U and phase-to-neutral undervoltage Reset ratio, undervoltage < 105% Operate value, residual voltage (5 - 300)% of UBase ±0.5% of U...
  • Page 64 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Current protection Table 42. Instantaneous phase overcurrent protection PHPIOC Function Range or value Accuracy Operate current (5-2500)% of lBase ± 1.0% of I at I ≤ I ± 1.0% of I at I > I Reset ratio >...
  • Page 65 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 44. Instantaneous residual overcurrent protection EFPIOC Function Range or value Accuracy Operate current (5-2500)% of lBase ±1.0% of I at I ≤ I ±1.0% of I at I > I Reset ratio >...
  • Page 66 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 46. Four step negative sequence overcurrent protection NS4PTOC Function Range or value Accuracy Operate value, negative (1-2500)% of lBase ± 1.0% of I at I £ I sequence current, step 1-4 ±...
  • Page 67 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 47. Sensitive directional residual overcurrent and power protection SDEPSDE Function Range or value Accuracy (0.25-200.00)% of lBase Operate level for 3I ·cosj ± 1.0% of I at I £ I directional residual ±...
  • Page 68 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 48. Thermal overload protection, one time constant LCPTTR/LFPTTR Function Range or value Accuracy Reference current (2-400)% of IBase ±1.0% of I Reference temperature (0-300)°C, (0 - 600)°F ±1.0°C, ±2.0°F Operate time: Time constant t = (1–1000) IEC 60255-8, ±5.0% or ±200 ms whichever is greater...
  • Page 69 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 50. Stub protection STBPTOC Function Range or value Accuracy Operating current (5-2500)% of IBase ± 1.0% of I at I ≤ I ± 1.0% of I at I > I IBase Reset ratio >...
  • Page 70 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 54. Broken conductor check BRCPTOC Function Range or value Accuracy Minimum phase current for operation (5–100)% of IBase ±1.0% of I Unbalance current operation (50–90)% of maximum current ±1.0% of I Independent operate time delay (0.000-60.000) s ±0.2% or ±45 ms whichever is greater...
  • Page 71 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Voltage protection Table 55. Two step undervoltage protection UV2PTUV Function Range or value Accuracy UBase Operate voltage, low and high step (1.0–100.0)% of ±0.5% of U Absolute hysteresis (0.0–50.0)% of UBase ±0.5% of U UBase...
  • Page 72 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 56. Two step overvoltage protection OV2PTOV Function Range or value Accuracy Operate voltage, step 1 and 2 (1.0-200.0)% of UBase ±0.5% of U at U ≤ U ±0.5% of U at U > U Absolute hysteresis (0.0–50.0)% of UBase...
  • Page 73 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 58. Overexcitation protection OEXPVPH Function Range or value Accuracy Operate value, start (100–180)% of ( UBase /f ± 0.5% of U rated Operate value, alarm (50–120)% of start level ±...
  • Page 74 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 61. Radial feeder protection PAPGAPC Function Range or value Accuracy Residual current detection (10 - 150)% of IBase ±1.0% of Ir at I ≤ Ir ±1.0% of I at I > Ir Reset ratio >95% at (50 - 150)% of IBase Operate time, residual current detection at 0 to 2...
  • Page 75 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Frequency protection Table 62. Underfrequency protection SAPTUF Function Range or value Accuracy Operate value, start function, at symmetrical three (35.00-75.00) Hz ± 2.0 mHz phase voltage Operate time, start at f + 0.02 Hz to f - 0.02 Hz Min.
  • Page 76 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 64. Rate-of-change frequency protection SAPFRC Function Range or value Accuracy Operate value, start function (-10.00-10.00) Hz/s ±10.0 mHz/s Operate value, restore enable frequency (45.00-65.00) Hz ±2.0 mHz Definite restore time delay (0.000-60.000) s ±0.2% or ±100 ms whichever is greater...
  • Page 77 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Multipurpose protection Table 65. General current and voltage protection CVGAPC Function Range or value Accuracy Measuring current input phase1, phase2, phase3, PosSeq, - NegSeq, -3*ZeroSeq, MaxPh, MinPh, UnbalancePh, phase1-phase2, phase2- phase3, phase3-phase1, MaxPh-Ph, MinPh-Ph, UnbalancePh-Ph Measuring voltage input...
  • Page 78 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 65. General current and voltage protection CVGAPC , continued Function Range or value Accuracy Independent time delay, undervoltage at 1.2 to 0.8 x U , step 1 - (0.00 - 6000.00) s ±0.2% or ±35 ms whichever is greater Overvoltage:...
  • Page 79 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 66. Voltage-restrained time overcurrent protection VRPVOC Function Range or value Accuracy Start overcurrent (2.0 - 5000.0)% of IBase ±1.0% of I at I ≤ I ±1.0% of I at I > I Reset ratio, overcurrent >...
  • Page 80 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Secondary system supervision Table 67. Current circuit supervision CCSSPVC Function Range or value Accuracy Operate current (10-200)% of IBase ±10.0% of I at I ≤ I ±10.0% of I at I > I Reset ratio, Operate current >90% Block current...
  • Page 81 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 69. Fuse failure supervision VDSPVC Function Range or value Accuracy Operate value, block of main fuse (10.0-80.0)% of UBase ±0.5% of Ur failure Reset ratio <110% Operate time, block of main fuse Min.
  • Page 82 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Control Table 70. Synchronizing, synchrocheck and energizing check SESRSYN Function Range or value Accuracy Phase shift, j (-180 to 180) degrees line Voltage high limit for synchronizing and synchrocheck (50.0-120.0)% of UBase ±...
  • Page 83 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 71. Autorecloser SMBRREC Function Range or value Accuracy Number of autoreclosing shots 1 - 5 Autoreclosing open time: shot 1 - t1 1Ph (0.000-120.000) s ± 0.2% or ± 35 ms shot 1 - t1 2Ph whichever is greater shot 1 - t1 3PhHS...
  • Page 84 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Scheme communication Table 72. Scheme communication logic for distance or overcurrent protection ZCPSCH Function Range or value Accuracy Scheme type Intertrip Permissive Underreach Permissive Overreach Blocking Co-ordination time for blocking (0.000-60.000) s ±...
  • Page 85 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 75. Current reversal and weak-end infeed logic for phase segregated communication ZC1WPSCH Function Range or value Accuracy Detection level phase to neutral (10-90)% of UBase ±0.5% of U voltage Detection level phase to phase (10-90)% of UBase ±0.5% of U...
  • Page 86 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Direct transfer trip Table 78. Low active power and power factor protection LAPPGAPC Function Range or value Accuracy Operate value, low active power (2.0-100.0)% of SBase ±1.0% of S Reset ratio, low active power <105% Operate value, low power factor 0.00-1.00...
  • Page 87 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 82. Negative sequence overvoltage protection LCNSPTOV Function Range or value Accuracy Operate value, negative sequence overvoltage (1-200)% of UBase ±0.5% of U at U≤U ±0.5% of U at U>U Reset ratio, negative sequence overvoltage >95% at (10–200)% of UBase Operate time, start at 0 to 2 x U...
  • Page 88 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 84. Negative sequence overcurrent protection LCNSPTOC Function Range or value Accuracy Operate value, negative sequence overcurrent (3 - 2500)% of IBase ±1.0% of Ir at I ≤ I ±1.0% of I at I > I Reset ratio, negative sequence overcurrent >95% at (50–2500)% of IBase Operate time, start at 0 to 2 x I...
  • Page 89 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 86. Three phase overcurrent LCP3PTOC Function Range or value Accuracy Operate value, overcurrent (5-2500)% of IBase ±1.0% of I at I ≤ I ±1.0% of I at I > I Reset ratio, overcurrent >...
  • Page 90 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Logic Table 88. Tripping logic common 3-phase output SMPPTRC Function Range or value Accuracy Trip action 3-ph, 1/3-ph, 1/2/3-ph Minimum trip pulse length (0.000-60.000) s ± 0.2% or ± 30 ms whichever is greater 3-pole trip delay (0.020-0.500) s ±...
  • Page 91 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 90. Configurable logic blocks Q/T Logic block Quantity with cycle time Range or value Accuracy medium normal ANDQT ORQT INVERTERQT XORQT SRMEMORYQT RSMEMORYQT TIMERSETQT (0.000-90000.000) s ± 0.5% ± 10 ms PULSETIMERQT (0.000-90000.000) s ±...
  • Page 92 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Monitoring Table 93. Measurements CVMMXN Function Range or value Accuracy Frequency (0.95-1.05) × f ± 2.0 mHz Voltage (0.1-1.5) ×U ± 0.5% of U at U£U ± 0.5% of U at U > U Connected current (0.2-4.0) ×...
  • Page 93 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 97. Current sequence component measurement CMSQI Function Range or value Accuracy Current positive sequence, I1 (0.1–4.0) × I ± 0.3% of I at I ≤ 0.5 × I Three phase settings ±...
  • Page 94 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 101. Disturbance report DRPRDRE Function Range or value Accuracy Pre-fault time (0.05–9.90) s Post-fault time (0.1–10.0) s Limit time (0.5–10.0) s Maximum number of recordings 100, first in - first out Time tagging resolution 1 ms See table...
  • Page 95 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 105. Event recorder Function Value Buffer capacity Maximum number of events in disturbance report Maximum number of disturbance reports Resolution 1 ms Accuracy Depending on time synchronizing Table 106. Trip value recorder Function Value Buffer capacity...
  • Page 96 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Metering Table 108. Pulse-counter logic PCFCNT Function Setting range Accuracy Input frequency See Binary Input Module (BIM) Cycle time for report of counter (1–3600) s value Table 109. Energy metering ETPMMTR Function Range or value Accuracy...
  • Page 97 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Station communication Table 110. Communication protocols Function Value Protocol IEC 61850-8-1 Communication speed for the IEDs 100BASE-FX Protocol IEC 60870–5–103 Communication speed for the IEDs 9600 or 19200 Bd Protocol DNP3.0 Communication speed for the IEDs 300–19200 Bd...
  • Page 98 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 116. SLM – SPA/IEC 60870-5-103/DNP3 port Quantity Range or value Optical connector Glass fiber: type ST Plastic fiber: type HFBR snap-in Fiber, optical budget Glass fiber: 11 dB (1000m/3000ft m typically *) Plastic fiber: 7 dB (25m/80ft m typically *) Fiber diameter Glass fiber: 62.5/125 mm...
  • Page 99 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Remote communication Table 120. Line data communication module Characteristic Range or value Type of LDCM Short range (SR) Medium range (MR) Long range (LR) Type of fiber Graded-index Singlemode 9/125 µm Singlemode 9/125 µm multimode 62.5/125 µm...
  • Page 100 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Hardware Table 121. Case Material Steel sheet Front plate Steel sheet profile with cut-out for HMI Surface treatment Aluzink preplated steel Finish Light grey (RAL 7035) Table 122. Water and dust protection level according to IEC 60529 Front IP40 (IP54 with sealing strip) Sides, top and bottom...
  • Page 101 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Basic IED functions Table 126. Self supervision with internal event list Data Value Recording manner Continuous, event controlled List size 40 events, first in-first out Table 127. Time synchronization, time tagging Function Value Time tagging resolution, events and sampled measurement values...
  • Page 102 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 130. IRIG-B Quantity Rated value Number of channels IRIG-B Number of optical channels Electrical connector: Electrical connector IRIG-B Pulse-width modulated 5 Vpp Amplitude modulated – low level 1-3 Vpp –...
  • Page 103 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Inverse characteristic Table 131. ANSI Inverse time characteristics Function Range or value Accuracy Operating characteristic: k = (0.05-2.00) in steps of 0.01 ANSI/IEEE C37.112 , ± 2.0% or ± 40 ms whichever is greater æ...
  • Page 104 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 132. IEC Inverse time characteristics Function Range or value Accuracy Operating characteristic: k = (0.05-2.00) in steps of 0.01 IEC 60255-151, ± 2.0% or ± 40 ms whichever is greater æ...
  • Page 105 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 134. Inverse time characteristics for overvoltage protection Function Range or value Accuracy Type A curve: k = (0.05-1.10) in steps of 0.01 ±5.0% or ±45 ms whichever is greater æ...
  • Page 106 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 135. Inverse time characteristics for undervoltage protection Function Range or value Accuracy Type A curve: k = (0.05-1.10) in steps of 0.01 ±5.0% or ±45 ms whichever is greater æ...
  • Page 107 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 136. Inverse time characteristics for residual overvoltage protection Function Range or value Accuracy Type A curve: k = (0.05-1.10) in steps of ±5.0% or ±45 ms whichever is greater 0.01 æ...

  • Page 108: Ordering For Customized Ied

    Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 22. Ordering for customized IED Table 137. General guidelines Guidelines Carefully read and follow the set of rules to ensure problem-free order management. Please refer to the available functions table for included application functions. PCM600 can be used to make changes and/or additions to the delivered factory configuration of the pre-configured.
  • Page 109 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 142. Differential functions Function Function Ordering no Positi Available Selected Notes and identification rules 1Ph High impedance differential protection HZPDIF 1MRK005904-HA Restricted earth fault protection, low impedance REFPDIF 1MRK005904-LA Line differential protection, 3 CT sets, 2-3 line ends L3CPDIF 1MRK005904-MA...
  • Page 110 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 144. Impedance functions, alternatives Function Function Ordering no Positi Available Selected Notes and identification rules Note: One, and only one alternative can be selected. Selected qty is 0 for other functions in an unselected alternative. Alternative 1 Distance protection, quadrilateral Distance protection zone, quadrilateral characteristic ZMQPDIS,...
  • Page 111 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 146. Current functions Function Function Ordering no Positi Available Selected Notes and identification rules Instantaneous phase overcurrent protection PHPIOC 1MRK005910-AA Four step phase overcurrent protection OC4PTOC 1MRK005910-BA Instantaneous residual overcurrent protection EFPIOC 1MRK005910-DA Four step residual overcurrent protection...
  • Page 112 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 153. General calculation Position Table 154. General calculation functions Function Function Ordering no Positi Available Selected Notes and identification rules Frequency tracking filter SMAIHPAC 1MRK005915-KA Table 155. Secondary system supervision Position Table 156.
  • Page 113 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 161. Logic Position Table 162. Logic functions Function Function Ordering no Positi Available Selected Notes and identification rules Configurable logic blocks Q/T 1MRK005922-ML Extension logic package 1MRK005922-AX Table 163. Monitoring Position Table 164.
  • Page 114 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 169. Mounting selection Mounting details with IP40 of protection from the front Selection Notes and Rules No mounting kit included 19" rack mounting kit for 1/2 x 19" case of 2xRHGS6 or RHGS12 19"...
  • Page 115 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 172. Analog system selection Analog system Selection Notes and Rules No first TRM included Note: Only valid in RED670–N00 Compression terminals Note: Only the same type of TRM (compression or ringlug) in the Ringlug terminals same terminal.
  • Page 116 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 174. Maximum quantity of I/O modules, with ring lug terminals, module limits se above Case sizes Maximum in case Possible locations for I/O modules with ringlug 1/1 x 19”, one (1) TRM P3, P5, P7, P9, P11, P13, P15 1/1 x 19”, two (2) TRM P3, P5, P7, P9, P11...
  • Page 117 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 175. Binary input/output module selection Binary input/output Selection Notes and Rules modules Slot position (rear view) Note! Max 3 positions in 1/2 rack, 8 in 3/4 rack with 1TRM, 5 in 3/4 rack with 2 TRM, 11 in 1/1 rack with 2 1/2 Case with 1 TRM █...
  • Page 118 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Table 175. Binary input/output module selection, continued Binary input/output Selection Notes and Rules modules SOM Static output Note: SOM must not to be placed module, 12 outputs, in position nearest to NUM; 1/2 48-60 VDC case slot P5, 3/4 case 1 TRM slot P10, 3/4 case 2 TRM slot P7, 1/1...

  • Page 119: Ordering For Pre-Configured Ied

    Version no Selection for position #1. Configuration alternatives Notes and Rules Single breaker, 3 phase tripping Multi breaker, 3 phase tripping Single breaker, 1 phase tripping Multi breaker, 1 phase tripping ACT configuration ABB standard configuration Selection for position #2.
  • Page 120 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Software options Notes and Rules No option All fields in the ordering form do not need to be filled in High impedance differential protection Line differential protection 6 CT sets, 3-5 line Note: Only one Line ends differential protection...
  • Page 121 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 First local HMI user dialogue language Notes and Rules HMI language, English IEC Additional local HMI user dialogue language No additional HMI language HMI language, English US Selection for position #4. Casing Notes and Rules 1/2 x 19"...
  • Page 122 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Analog input system Notes and Rules Compression terminals Ringlug terminals First TRM, 6I+6U 1A, 100/220V First TRM, 6I+6U 5A, 100/220V First TRM, 3I, 5A + 3I, 1A + 6U, 110/220V Note: Only for A31 and A32 No second TRM included Compression terminals...
  • Page 123 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Binary input/output module, mA and time synchronizating Notes and Rules boards. Make BIM with 50 mA inrush current the primary choice. BIM with 50 mA inrush current fulfill additional standards. As a consequence the EMC withstand capability is further increased.
  • Page 124 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Remote end communication, DNP serial comm. and time synchronization modules Notes and Rules Slot position (rear view) Available slots in 1/2 and 3/4 case with 1TRM █ █ █ █ Note: Only for A31/A32.

  • Page 125: Ordering For Accessories

    Multi-breaker/Single or Three Phase trip with external neutral 001024-CA. Please refer to the website: on current circuit (ordering number RK926 315-BV). www.abb.com/substationautomation for detailed information. The normally open "In test mode" contact 29-30 on the RTXP Due to the high flexibility of our product and the wide variety of...
  • Page 126 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 External resistor unit High impedance resistor unit 1-ph with resistor and voltage dependent resistor for 20-100V operating voltage Quantity: RK 795 101-MA High impedance resistor unit 3-ph with resistor and voltage dependent resistor for 20-100V Quantity: RK 795 101-MB operating voltage...
  • Page 127 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 User documentation Rule: Specify the number of printed manuals requested Application manual Quantity: 1MRK 505 307-UEN ANSI Quantity: 1MRK 505 307-UUS Technical manual Quantity: 1MRK 505 308-UEN ANSI Quantity: 1MRK 505 308-UUS Commissioning manual Quantity: 1MRK 505 309-UEN...
  • Page 128 Line differential protection RED670 2.0 1MRK505310-BEN C Product version: 2.0 Engineering manual, 670 series Quantity: 1MRK 511 308-UEN ANSI Quantity: 1MRK 511 308-UUS Cyber security guideline Quantity: 1MRK 511 309-UEN Reference information For our reference and statistics we would be pleased to be provided with the following application data: Country: End user: Station name:...
  • Page 130 For more information please contact: Note: We reserve the right to make technical changes or modify the contents of this document without prior notice. ABB AB does ABB AB not accept any responsibility whatsoever for potential errors Substation Automation Products or possible lack of information in this document.

This manual is also suitable for:

Relion red670

Table of Contents