Chapter 3
>> Make sure that the license key is the correct one.
"The function has already been enabled."
>> Make sure that the Kit has not already been enabled.
4. Hold down the control panel power switch for 3 sec or more. Follow the instructions
shown on the screen for shut-down sequence so that the main power switch may be turned
off. Turn off the main power switch, wait for 10 sec, and turn it back on.
5. The registered license will become valid when the device is turned back on. When it has
started normally, press the Counter key, and click the Device Configuration button to make
sure that the Kit is indicated as part of the options.
3-2