Charging and installing the battery pack
Installing the battery pack
( 1) Set the POWER switch to OFF to prevent misoperation of the camcorder.
( 2) To open the lid of the battery compartment, slide the OPEN (BATT) release lever.
( 3) Insert the battery pack in the direction of the arrow.
( 4) Close the lid.
1
POWER
To remove the battery pack
Open the lid of the battery compartment. Then release the battery release lever, and
remove the battery pack.
When removing battery pack
Always keep the lid of the battery compartment upright so that the battery pack does
not fall out when you open the lid.
2
3
4
Battery release lever
9