Selecting The Mode Setting Of Each Item - Sony Handycam Vision DCR-TRV5 Operating Instructions Manual
Sony operating instructions digital video camera recorder dcr-trv5
Hide thumbs
Also See for Handycam Vision DCR-TRV5:
- Service manual (165 pages) ,
- Operating instructions manual (91 pages) ,
- Service manual (25 pages)
Table of Contents
Advertisement
Changing the mode settings
Selecting the mode setting of each item
r is set at the factory.
Items for both CAMERA and VTR modes
LCD BRIGHT
Select this item to adjust the brightness of the LCD screen. The LCD screen becomes
brighter when you turn the control dial up, and darker when you turn it down.
COMMANDER* <rON/OFF>
• Select ON when using the supplied Remote Commander for the camcorder.
• Select OFF when not using the Remote Commander.
REC MODE <rSP/LP>
• Select SP when recording in SP (standard play) mode.
• Select LP when recording in LP (long play) mode.
BEEP <rON/OFF>
• Select ON so that beeps sound when you start/stop recording, etc.
• Select OFF when you do not want to hear the beep sound.
TITLEERASE
Erase the title you have superimposed.
LCD B.L. <rBRT NORMAL/BRIGHT>
• Normally select BRT NORMAL.
• Select BRIGHT when the LCD panel is dark.
Even if you adjust the LCD B.L., the recorded picture is not affected.
LCD COLOR
Select this item and change the level of the indicator by turning the control dial up or
down to adjust the color intensity of the picture.
VF BRIGHT
Close the LCD panel.
Select this item to adjust the brightness of the viewfinder. The viewfinder becomes
brighter when you turn the control dial up, and darker when you turn it down.
DISPLAY <LCD or V-OUT/rLCD >
• Normally select LCD.
• Select V-OUT/LCD to display indicator both on the LCD panel and TV screen.
AUTO TV ON <ON/rOFF>
You can use this feature only with Sony TVs.
• Select ON to turn on the TV automatically when using the LASER LINK function.
• Select OFF not to turn on the TV.
TV INPUT <rVIDEO1/VIDEO2/VIDEO3/OFF>
Select 1, 2 or 3 of the video input on the TV which the IR receiver (not supplied) is
connected to when using the LASER LINK function.
24
Advertisement
Table of Contents
