Searching for the end of the picture
You can go to the end of the recorded portion after you record and play back the tape.
The tape starts rewinding or fast-forwarding and the last about 5 seconds of the
recorded portion plays back. Then the tape stops at the end of the recorded picture (End
Search).
(1) While pressing OPEN, open the LCD panel.
(2) Press END SEARCH.
This function works when the POWER switch is set to CAMERA or VTR.
1
Notes on End Search
• When you use a tape without cassette memory, the End Search function does not
work once you eject the cassette after recording. (However, when you record the
scene once more, End Search function will work.)
• When you use a tape with cassette memory, the End Search function works once you
eject the cassette. When you play back a tape which has a blank portion in the
beginning or between the recorded portions, the End Search function will not work
correctly.
2
END SEARCH
21