5. Remove the Bottle Drive Unit [1].
• 2 Bosses [2]
• 5 Hooks [3]
CAUTION:
Be sure to remove the Anti-vibration Sheet before replacing the Bottle Drive Unit.
Removing the Waste Toner Gear Holder
■ Preparation
NOTE:
If waste toner has overflowed onto the Intermediate Guide, this waste toner can be fed into the Waste Toner Container by operating
the Waste Toner Feed Motor (M17) (COPIER > FUNCTION > PART-CHK > MTR = 14).
1. Remove the Left Cover (Upper).
[2]
[3]
[2]
[3]
[3]
[3]
[1]
[2]
[3]
[3]
233
4. Parts Replacement and Cleaning
[2]
[3]