Table of Contents
Advertisement
Mode
Full disengage-
ment mode
*1: When image formation is executed
*2: Disengagement is not performed during the operation for entering the deep sleep mode.
■ ITB Displacement Correction
Purpose
To prevent problems caused by ITB displacement.
Control description
With this machine, belt displacement is prevented by ITB displacement correction using a rib guide mechanism.
[2]
[3]
No.
Parts name
[1]
ITB Tension Roller
[2]
Reinforcing tape
[3]
Rib
[4]
ITB
[5]
Flange
■ ITB Cleaning
Purpose
To remove residual toner on the ITB to prevent it from affecting the next image.
Control description
1. The ITB Cleaning Blade scrapes toner on the ITB.
2. The ITB Cleaning Screw feeds the toner that has been scraped off to the Waste Toner Container.
Status
[4]
[5]
[1]
It drives the ITB.
It is used to reinforce the ITB edges (to increase the strength).
It controls displacement of the ITB.
Belt for performing primary transfer
The shape is sloped to prevent the rib from being placed over it.
M08
M08
Role
67
2. Technology
Operation status
Advertisement
Table of Contents
Troubleshooting
