hit counter script

Rs-232C; Communication Specifications - Sony VPL-VW50 Protocol Manual

Video projector
Hide thumbs Also See for VPL-VW50:
Table of Contents

Advertisement

1. Introduction
This protocol manual describes the basic configuration and basic operations of various commands used
for projector. Projector can be controlled using the commands provided in "Appendix". Using an external
CONTROLLER , etc., inputs can be switched and the power can also be turned on and off. In the follow-
ing paragraphs, "CONTROLLER" means an external device such as a PC which controls projector using
these commands.

2. RS-232C

2-1. Communication Specifications

<RS-232C Communication Signal>
. Full duplex communication channels (Flow control not performed.)
. Start-stop synchronism system
. Baud rate: 38.4 kbps (bits per second)
. The bit configuration is defined as follows.
1 START Bit + 8 DATA Bits + 1 PARITY Bit + 1 STOP Bit
START
D0
D1
D2
D3
D4
D5
D6
D7
PARITY STOP
BIT
(LSB)
(MSB)
(EVEN)
BIT
EVEN Parity ...... Total number of "1"s from D0 to D7 is an even number. 8 0
...... Total number of "1"s from D0 to D7 is an odd number. 8 1
1
VPL-VW50

Advertisement

Table of Contents
loading

Table of Contents