Page 1
VIDEO PROJECTOR VPL-HS50 VPL-HS51 REMOTE COMMANDER RM-PJHS50 SERVICE MANUAL 1st Edition...
Page 2
! WARNING This manual is intended for qualified service personnel only. To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer all servicing to qualified service personnel.
Page 3
For the customers in the Netherlands Voor de klanten in Nederland Hoe u de batterijen moet verwijderen, leest u in de tekst van deze handleiding. Gooi de batterij niet weg maar lever deze in als klein chemisch afval (KCA). Für Kunden in Deutschland Entsorgungshinweis: Bitte werfen Sie nur entladene Batterien in die Sammelboxen beim Handel oder den Kommunen.
Lamp Power Supply Board ............1-8 1-4-7. F Board ..................1-9 1-4-8. HA Board/HB Board/L Board ..........1-10 1-4-9. Q Board (VPL-HS51) .............. 1-11 1-5. Replacing the Main Parts ................1-11 1-5-1. DC Fan (for GA/GB unit) ............1-11 1-5-2.
Page 6
C ........................6-2 F ......................... 6-26 GA ......................6-27 GB ......................6-30 HA ......................6-32 HB ......................6-33 L ........................ 6-34 NF ......................6-34 TA ......................6-34 U ........................ 6-34 V ........................ 6-34 Q (VPL-HS51) ..................6-35 Frame Wiring .................... 6-38 VPL-HS50/HS51...
Page 7
7. Board Layouts C ........................7-2 GA ....................... 7-4 GB ....................... 7-5 F ........................7-6 HA ....................... 7-6 HB ....................... 7-6 L ........................7-6 NF ........................ 7-6 Q (VPL-HS51) .................... 7-7 TA ....................... 7-7 U ........................7-7 V ........................7-7 VPL-HS50/HS51...
Section 1 Service Overview 1-1. External View 1-2. Board Location TA board Lamp power supply board C board V board Q board (VPL-HS51) NF board F board U board L board GB board HB board GA board HA board VPL-HS50/HS51...
1-3. Removing/Installing the Cabinet 1-3-2. Front Panel (D) Assembly/Front Panel (U) Assembly Removal (VPL-HS50) When removing/installing or replacing the parts, place the unit on the conductive cushion with the top panel assembly 1. Remove the base assembly. (Refer to Section 1-3-1.) down.
1-3-3. Rear Cover/Rear Panel Removal (VPL-HS51) 1. Remove the base assembly. (Refer to Section 1-3-1.) Removal 1. Remove the base assembly. (Refer to Section 1-3-1.) 2. Remove the screw and disconnect the two harnesses from the connector (CN1806, 1903) on the C board, 2.
1-4. Replacing the Board 8. Disconnect the harness from the connector (CN201) on the C board. 1-4-1. C Board 9. Remove the filter assembly. 10. Remove the rear panel. Removal 1. Remove the base assembly. (Refer to Section 1-3-1.) Rear panel Filter assembly 2.
Page 13
CN1910 CN2000 CN1600 Plate (connector) CN1700 3 x 12 Connector CN1806 CN1909 screws CN1901 (VPL-HS51) CN1902 CN1500 CN203 CN1903 CN1903 CN1900 3 x 12 C board Shield plate (CU) Installation 8. Install the C board in the reverse order of steps 3 to 7.
1-4-2. GA Board 9. Remove the three hooks, then remove the holder (GB) from the holder (GA). Removal 10. Disconnect the harness from the connector (CN300) 1. Remove the cabinet. (Refer to Section 1-3.) on the GA board. 2. Remove the C board. 11.
(Refer to steps 2 and 3 of Section 1-5-2.) Section 1-3-2.) 4. Remove the optical block assembly. (Refer to steps 2 to 4 of Removal (VPL-HS51) in (Refer to step 5 of Section 1-5-3.) Section 1-3-2.) 5. Remove the lamp house.
1-4-5. V Board 1-4-6. Lamp Power Supply Board Removal Removal 1. Remove the base assembly. (Refer to Section 1-3-1.) 1. Remove the cabinet. (Refer to Section 1-3.) 2. Remove the rear cover and rear panel. 2. Remove the C board. (Refer to Section 1-3-3.) (Refer to steps 3 to 7 of Section 1-4-1.) 3.
1-4-7. F Board 8. Remove the shield plate (BD) in the direction shown by the arrow. 9. Remove the shield plate (BU) in the direction shown Removal by the arrow. 1. Remove the cabinet. (Refer to Section 1-3.) 10. Remove the four hooks of the holder (BD), then remove the holder (BU) and lamp power supply board.
1-4-8. HA Board/HB Board/L Board Installation 16. Install the HA board, HB board and L board in the Removal reverse order of steps 6 to 15. 1. Remove the cabinet. (Refer to Section 1-3.) 2. Remove the C board. 17. Assemble this unit in the reverse order of steps 1 to 5. (Refer to steps 3 to 7 of Section 1-4-1.) 3.
1. Remove the base assembly. (Refer to Section 1-3-1.) 2. Remove the front panel (D) assembly. Removal (Refer to steps 2 to 4 of Removal (VPL-HS51) in 1. Remove the cabinet. (Refer to Section 1-3.) Section 1-3-2.) 2. Remove the C board.
1-5-2. Lamp Assembly 1-5-3. Optical Block Assembly Removal Removal 1. Loosen the screw [A], then remove the lamp cover 1. Remove the cabinet. (Refer to Section 1-3.) assembly. 2. Remove the C board. 2. Loosen the three screws [B]. (Refer to steps 3 to 7 of Section 1-4-1.) 3.
1-5-4. DC Fan (for Lamp) 1-5-5. DC Fan (for Lamp Power Supply) and TA Board Removal Removal 1. Remove the cabinet. (Refer to Section 1-3.) 2. Remove the C board. 1. Remove the cabinet. (Refer to Section 1-3.) (Refer to steps 3 to 7 of Section 1-4-1.) 2.
1-5-6. Prism Block and WV Plate (1), (2) Removal 1. Remove the cabinet. (Refer to Section 1-3.) 6. Remove the spring (P), then remove the out-polarizer 2. Remove the C board. plate (R) assembly on the outgoing radiation side and (Refer to steps 3 to 7 of Section 1-4-1.) WV plate (1), (2).
1-5-7. Lens Unit Removal 1. Remove the cabinet. (Refer to Section 1-3.) 2. Remove the C board. (Refer to steps 3 to 7 of Section 1-4-1.) 3. Remove the lamp assembly. (Refer to steps 2 and 3 of Section 1-5-2.) 4.
1-5-8. Unit Assembly Removal 1. Remove the cabinet. (Refer to Section 1-3.) 7. Remove the screw (PWH M2 x 5), then remove the 2. Remove the C board. in-polarizer plate (G) assembly on the incoming (Refer to steps 3 to 7 of Section 1-4-1.) radiation side.
1-5-9. Unit Assembly Parts Orientation The main condenser lens assembly and the relay-2 lens assembly are fixed to the unit assembly and cannot be removed. Marking side Marking side Main condenser lens PS converter B-reflect dichroic mirror Lens-2 flyeye Lens-1 flyeye G-reflect dichroic mirror Relay-1 lens R channel mirror...
1-6. Unleaded Solder 3) Iris Adjustment Boards requiring use of unleaded solder are printed with a Preparation lead free mark (LF) indicating the solder contains no lead. (Caution: Some printed circuit boards may not come 1. Enter “34/Iris Adj.” in Other of Device Adjust. printed with the lead free mark due to their particular size.) 2.
1-7-3. NVM (Non-Voltible-Memory) 2. Minimum voltage adjustment for fan 1 drive 1. Enter “29: Fan1/Reg Min” in Other of Device Adjust. 2. Adjust the voltage so that pin 1 of the connector NVM access error CN1907 on the C board is within the following The Lamp and Temp LEDs blink at high speed (at intervals specification.
Page 30
Cross Table of Board Replacement Board Name Device Name Item Name P.DRV VCOM (R) VCOM (G) VCOM (B) W/B ADJUST INPUT-A HIGH GAIN R GAIN G GAIN B BIAS R BIAS G BIAS B INPUT-A LOW GAIN R GAIN G GAIN B BIAS R BIAS G...
1-8. Memory Memory structure consists of the following five memory Gamma memory is actualized through Gamma mode blocks. functions’offsetting the output values to the Contrast and 1. Set memory Brightness devices. 2. Status memory When the power plug is connected to the power line 3.
Page 32
Video Video Channel Memory Channel Channel S Video S Video Memory Memory Input-A Input-A Component Component HDMI HDMI Turn over to the upper and lower Turn over to the upper and lower Image Flip Image Flip Image Flip Memory sides sides Memory No turn over to the upper and...
1-9. Warning on Power Connection Use a proper power cord for your local power supply. The United States, Continental Australia Japan Canada Europe Plug type YP-11 YP-21 SP-61 YP-13 Female end YC-13L YC-13L YC-13L C7-2 YC-13L Cord type SPT-2 H03VVH2-F H03VVH2-F H03VVH2-F VCTFK...
Section 2 Electrical Adjustments 2-1. Preparations 2-2. V COM Adjustment 2-1-1. Required Equipment 1. Input the green-only XGA 1 Lime ON/OFF signal to INPUT-A, and set the CONTRAST to 70. . Oscilloscope 2. Set the screen to G VCOM adjustment of “Device Tektronix 2465 or equivalent Adjust.”...
2-3. Adjustment Item Initialize Data MenuTitle ItemName Memory Name Status Picture Memory RCP Memory Memory Memory All Input Ch. Dynamic Standard Cinema User1 User2 User3 User1 User2 User3 Picture Picture Mode Adjust Picture Contrast Brightness Color Sharpness Black Level Adj. Gamma Correction Color Temp.
Page 37
Memory Name Remarks W/B Memory Computer Others High Middle Custom1 Custom2 Custom3 High Middle Custom1 Custom2 Custom3 VPL-HS50/HS51...
Page 38
MenuTitle ItemName Memory Name Status Picture Memory RCP Memory Memory Memory All Input Ch. Dynamic Standard Cinema User1 User2 User3 User1 User2 User3 Setup Status English Language Input OA Signal Sel. Auto Auto Color System Installation V Keystone Image Flip Background Blue Illumination...
Page 39
Memory Name Remarks W/B Memory Computer Others High Middle Custom1 Custom2 Custom3 High Middle Custom1 Custom2 Custom3 VPL-HS50/HS51...
Page 40
DeviceName ItemName Memory Name Set Memory Status Memory Chroma Memory NT358/NT443 Pal/Pal-M/N/ Component Two times speed HDTV HDTV(GBR) 15kRGB (15k) Component (YPbPr) Include two times speed /BW60 Secam/BW50 A/D Converter ADC/ Clamp Position Clamp Width R Gain(Other) R Gain(VideoGBR) R Gain(Component 15k) R Gain(Component 30k) R Gain(Component HD) G Gain(Other)
Page 41
Memory Name Remarks Channel Memory Image Flip Memory Fan Memory Turn over to the upper No turn over to the Video S Video Input-A Component HDMI and lower sides upper and lower sides – – – – – – – –...
Page 42
DeviceName ItemName Memory Name Set Memory Status Memory Chroma Memory Component Two times speed HDTV HDTV(GBR) NT358/NT443 Pal/Pal-M/N/ 15kRGB /BW60 Secam/BW50 (15k) Component (YPbPr) Include two times speed Chroma/D.Comb Chroma/ Ch1 Gain(NTSC3.58) Ch1 Gain(Other) Ch2 Gain(NTSC3.58) Ch2 Gain(Other) – – –...
Page 43
Memory Name Remarks Channel Memory Image Flip Memory Fan Memory Turn over to the upper No turn over to the Video S Video Input-A Component HDMI and lower sides upper and lower sides – – – – – – – –...
Page 44
DeviceName ItemName Memory Name Set Memory Status Memory Chroma Memory Component Two times speed HDTV HDTV(GBR) NT358/NT443 Pal/Pal-M/N/ 15kRGB /BW60 Secam/BW50 (15k) Component (YPbPr) Include two times speed Display Sub Cont Engine Sub Brt LUT Through UF SW APC Thres HST Position HST Phase Drift On...
Page 45
Memory Name Remarks Channel Memory Image Flip Memory Fan Memory Turn over to the upper No turn over to the Video S Video Input-A Component HDMI and lower sides upper and lower sides 2-11 VPL-HS50/HS51...
Page 46
DeviceName ItemName Memory Name Set Memory Status Memory Chroma Memory NT358/NT443 Pal/Pal-M/N/ Component Two times speed HDTV HDTV(GBR) 15kRGB /BW60 Secam/BW50 (15k) Component (YPbPr) Include two times speed Other Temp/ Thresh Lamp Thresh Panel Thresh Atmos Hi Alt Const Fan/ High Alt Cofe Cont Max Fan1/...
Page 47
Memory Name Remarks Channel Memory Image Flip Memory Fan Memory Turn over to the upper No turn over to the Video S Video Input-A Component HDMI and lower sides upper and lower sides Adj u stment i s i m possi b l e Adj u stment i s i m possi b l e Adj u stment i s i m possi b l e Adj u stment i s i m possi b l e...
Page 48
DeviceName ItemName Memory Name Set Memory Status Memory Chroma Memory NT358/NT443 Pal/Pal-M/N/ Component Two times speed HDTV HDTV(GBR) 15kRGB (15k) Component (YPbPr) Include two times speed /BW60 Secam/BW50 CTI Tap CTI Shift CTI Limit CTI Gain Sharp Limit MD Thresh C MD Thresh 0 Continue Edit Detect...
Page 49
Memory Name Remarks Channel Memory Image Flip Memory Fan Memory Turn over to the upper No turn over to the Video S Video Input-A Component HDMI and lower sides upper and lower sides 2-15 VPL-HS50/HS51...
2-4. White Balance Adjustment on 5. Repeat steps 3 and 4, and adjust each GAIN and BIAS Servicing of RGB so that x and y are within the following specification. x: 0.294 ± 0.002 2-4-1. Computer y: 0.310 ± 0.003 6.
3. Input WXGA 80IRE Window white (3 colors: RGB) Adjustment to INPUT-A and adjust the GAIN of colors other than R of white balance so that the chromaticity (x80 and The adjustment procedures of “1. Middle”, ”2. High” and y80) is within specification. “3.
Page 53
Section 3 Semiconductors 24LC128T-I/SN BA00ASFP-E2 HD64F2378VFQ34V MBM29LV160BE-90TN-750IP100 24LC21AT/SN BA00BC0WFP BR24L02F-WE2 HN58X24256FPIZ ICS342M-05LF MM1115XFBE NE57814DD.118 ST24FC21M6TR TL431BCDR2 TOP VIEW TOP VIEW 48PIN TSOP 144PIN FQFP MCZ3001UB K4D263238F-UC50T CXA7004R-T4 LC4032V-75TN48C-DLY2 TOP VIEW 8PIN SOP TOP VIEW 74VHC02MTCX SN74LV00APWR 100PIN TQFP SN74LV125APWR 32PIN SSOP SN74LVC125APWR-12 TOP VIEW KRM-TR303E-TP...
Page 54
MZ1540 PW168B-10VL SN74LV4052APWR TK11100CSCB-G TC74VHC123AFT(EL) INDEX BOTTOM VIEW MARKING SIDE VIEW TOP VIEW 352PIN PBGA 16PIN SSOP NET+NS7520B-1-C55 6PIN CHIP S-80928CNMC-G8YT2G TK11133CSCL-G SN74LVC1G14DCKR TC7SH00FU-TE85R UPD64083GF-3BA INDEX BOTTOM VIEW 177PIN PBGA NJM2904V(TE2) TOP VIEW NJM4556AV(TE2) TA75W393FU 100PIN QFP TA75W393FU-TE12R 5PIN CHIP 5PIN CHIP PC123GY2 SAA7119E/V2...
Therefore, specified parts should be used in the case of replacement. 2. Standardization of Parts Some repair parts supplied by Sony differ from those used for the unit. These are because of parts common- ality and improvement. Parts list has the present standardized repair parts.
Base Block 4-2. Exploded Views FOR VPL-HS51 3 x 12 3 x 12 3 x 12 3 x 12 Part No. SP Description Part No. SP Description A-1057-960-A s NF MOUNT 4-091-838-02 s SCREW M5X5, SPECIAL A-1086-165-A s Q COMPL...
Page 59
GA and GB Block BTP3 x 12 BTP3 x 12 3 x 12 3 x 12 Part No. SP Description A-1070-686-A s MOUNTED CIRCUIT BOARD, GA A-1070-687-A s MOUNTED CIRCUIT BOARD, GB 1-543-993-11 s CORE, FERRITE 7-685-548-19 s SCREW +BTP 3X12 TYPE2 N-S VPL-HS50/HS51...
Page 60
A-1057-965-A s MOUNTED CIRCUIT BOARD, V A-1070-685-A s MOUNTED CIRCUIT BOARD, C (FOR VPL-HS50) A-1086-166-A s MOUNTED CIRCUIT BOARD, C (FOR VPL-HS51) 1-787-139-11 s DC FAN 1-818-098-21 s INLET, AC (WITH NOISE FILTER) 7-682-247-09 s SCREW +K 3X6 7-682-961-01 s SCREW +PSW 4X8...
Page 61
Lamp Power Supply Block 3 x 12 BVTP 3 x 20 3 x 12 See Optics Block 1, 2 Part No. SP Description Part No. SP Description 1-468-866-11 s LAMP POWER SUPPLY BLOCK 4-099-076-02 s SPRING, CONCAVE 1-543-993-11 s CORE, FERRITE 1-787-149-11 s D.C.
Page 62
Top Panel Block 3 x 12 3 x 12 3 x 12 3 x 12 3 x 12 BVTP 3 x 6 3 x 12 Part No. SP Description Part No. SP Description A-1057-962-A s MOUNTED CIRCUIT BOARD, L A-1086-806-A s MOUNTED CIRCUIT BOARD, TA A-1057-964-A s MOUNTED CIRCUIT BOARD, U 1-576-701-21 s THERMOSTAT A-1057-969-A s MOUNTED CIRCUIT BOARD, HA...
Page 63
Optics Block 1 PWH M2 x 5 B2 x 8 See Optics Block 2 Part No. SP Description Part No. SP Description A-1094-996-A s OPT UNIT ASSY 7-621-772-40 s SCREW +B 2X8 A-1094-998-A s PRISM BLOCK ASSY 7-681-000-00 s SCREW +PWH M2X5 A-1095-000-A s PROJECTION LENS ASSY (ZOOM RING) A-1095-038-A s PANEL (R) ASSY, OUT-POLARIZER A-1095-039-A s PANEL (G) ASSY, OUT-PRE-POLARIZER...
Page 64
Optics Block 2 PTP3 x 10 M2 x 5 M2 x 5 M2 x 5 M2 x 5 Part No. SP Description A-1095-034-A s PS ASSY A-1095-035-A s PANEL (R) ASSY, IN-POLARIZER A-1095-036-A s PANEL (G) ASSY, IN-POLARIZER A-1095-037-A s PANEL (B) ASSY, IN-POLARIZER 1-788-185-11 s IRIS UNIT 7-681-000-00 s SCREW +PWH M2X5 7-685-147-21 s SCREW +P 3X10 TYPE2 SLIT...
------- C BOARD (C BOARD) ------- Ref. No. *1:[VPL-HS50] or Q'ty Part No. SP Description *2:[VPL-HS51] C510 1-125-777-11 s CERAMIC CHIP 0.1UF 10.00% 10V Ref. No. C511 1-107-820-11 s CERAMIC CHIP 0.1UF 16V or Q'ty Part No. SP Description C512 1-125-777-11 s CERAMIC CHIP 0.1UF 10.00% 10V...
Page 66
(C BOARD) (C BOARD) Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description C611 1-107-820-11 s CERAMIC CHIP 0.1UF 16V C719 1-119-667-11 s CERAMIC CHIP 22UF 10V C612 1-119-923-11 s CERAMIC CHIP 0.047UF 10.00% 10V C720 1-137-710-11 s CERAMIC CHIP 10UF 20% 6.3V C613...
Page 67
(C BOARD) (C BOARD) Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description C939 1-165-908-11 s CERAMIC CHIP 1UF 10% 10V C1222 1-164-943-11 s CERAMIC CHIP 0.01UF 10.00% 16V C1000 1-107-820-11 s CERAMIC CHIP 0.1UF 16V C1223 1-107-820-11 s CERAMIC CHIP 0.1UF 16V C1001...
Page 68
(C BOARD) (C BOARD) Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description C1328 1-119-667-11 s CERAMIC CHIP 22UF 10V C1507 1-115-339-11 s CERAMIC CHIP 0.1UF 10.00% 50V C1329 1-164-943-11 s CERAMIC CHIP 0.01UF 10.00% 16V C1510 1-115-339-11 s CERAMIC CHIP 0.1UF 10.00% 50V C1330...
Page 69
(C BOARD) (C BOARD) Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description C1714 1-107-820-11 s CERAMIC CHIP 0.1UF 16V C1930 1-128-992-21 s ELECT CHIP 47UF 20% 25V C1715 1-128-992-21 s ELECT CHIP 47UF 20% 25V C1931 1-164-156-11 s CERAMIC CHIP 0.1UF 25V...
Page 70
(C BOARD) (C BOARD) Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description D401 8-719-069-55 s DIODE UDZSTE-175.6B FB1301 1-469-670-21 o FERRITE 0UH D402 8-719-069-55 s DIODE UDZSTE-175.6B FB1302 1-414-921-11 s FERRITE 0UH D403 8-719-941-86 s DIODE DAN202UT106 FB1303...
Page 71
(C BOARD) (C BOARD) Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description FB1932 1-469-670-21 o FERRITE 0UH IC1201 6-704-843-01 s IC AIC1117A-PEJTR FB1933 1-469-670-21 o FERRITE 0UH IC1300 6-704-843-01 s IC AIC1117A-PEJTR FB1934 1-469-670-21 o FERRITE 0UH IC1302...
Page 72
(C BOARD) (C BOARD) Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description L504 1-412-058-11 s INDUCTOR 10UH Q1400 8-729-907-00 s TRANSISTOR DTC114EU L600 1-469-522-91 s INDUCTOR 1UH Q1401 8-729-013-28 s TRANSISTOR HN1B01FU-TE85R L601 1-469-525-91 s INDUCTOR 10UH Q1500...
Page 73
(C BOARD) (C BOARD) Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description R136 1-218-967-11 s RES-CHIP 15K 5% 1/16W R431 1-218-937-11 s RES-CHIP 47 5% 1/16W R137 1-216-829-11 s METAL CHIP 4.7K 5% 1/10W R432 1-218-929-11 s RES-CHIP 10 5% 1/16W R138...
Page 74
(C BOARD) (C BOARD) Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description R555 1-218-941-81 s RES-CHIP 100 5% 1/16W R908 1-218-937-11 s RES-CHIP 47 5% 1/16W R556 1-218-973-11 s RES-CHIP 47K 5% 1/16W R909 1-218-953-11 s RES-CHIP 1K 5% 1/16W...
Page 75
(C BOARD) (C BOARD) Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description R975 1-218-977-11 s RES-CHIP 100K 5% 1/16W R1305 1-218-933-11 s RES-CHIP 22 5% 1/16W R976 1-218-965-11 s RES-CHIP 10K 5% 1/16W R1306 1-218-933-11 s RES-CHIP 22 5% 1/16W...
Page 76
(C BOARD) (C BOARD) Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description R1430 1-218-937-11 s RES-CHIP 47 5% 1/16W R1618 1-218-990-11 s SHORT CHIP 0 R1431 1-218-929-11 s RES-CHIP 10 5% 1/16W R1619 1-218-990-11 s SHORT CHIP 0 R1432...
Page 77
(C BOARD) (C BOARD) Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description R1815 1-218-941-81 s RES-CHIP 100 5% 1/16W R1880 1-218-941-81 s RES-CHIP 100 5% 1/16W R1816 1-218-941-81 s RES-CHIP 100 5% 1/16W R1881 *2 1-218-937-11 s RES-CHIP 47 5% 1/16W R1817 1-218-961-11 s RES-CHIP 4.7K 5% 1/16W...
Page 78
(C BOARD) (C BOARD) Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description R1980 1-218-929-11 s RES-CHIP 10 5% 1/16W RB402 1-234-370-21 s RES, NETWORK 22 (1005X4) R1981 1-218-965-11 s RES-CHIP 10K 5% 1/16W RB403 1-234-370-21 s RES, NETWORK 22 (1005X4)
Page 79
(C BOARD) (C BOARD) Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description RB1118 1-234-370-21 s RES, NETWORK 22 (1005X4) RB1804 1-234-378-21 s RES, NETWORK 10K (1005X4) RB1119 1-234-371-21 s RES, NETWORK 47 (1005X4) RB1806 1-234-372-21 s RES, NETWORK 100...
Page 80
------- -------- F BOARD GA BOARD ------- -------- Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description A-1076-324-A s MOUNTED CIRCUIT BOARD, F A-1070-686-A s MOUNTED CIRCUIT BOARD, GA 2pcs 4-382-854-11 s SCREW (M3X10), P, SW (+) CN10 1-779-658-11 o PIN, CONNECTOR (PC BOARD) 4P CN11...
Page 81
-------- (GA BOARD) GB BOARD -------- Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description L102 1-416-510-21 s INDUCTOR 100UH A-1070-687-A s MOUNTED CIRCUIT BOARD, GB L103 1-406-977-21 s INDUCTOR 100UH L300 1-419-764-11 s INDUCTOR 330UH C350 1-162-970-11 s CERAMIC CHIP 0.01UF 10.00% 25V L301...
Page 82
(GB BOARD) (GB BOARD) Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description D405 8-719-106-23 s DIODE RD7.5M-B2 R353 1-216-825-11 s METAL CHIP 2.2K 5% 1/10W D406 8-719-510-09 s DIODE D10SC6M R354 1-218-843-11 s METAL CHIP 680 0.5% 1/10W D407 8-719-404-50 s DIODE MA111-TX R355...
Page 83
-------- (GB BOARD) HA BOARD -------- Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description R433 1-216-809-11 s METAL CHIP 100 5% 1/10W A-1057-969-A s MOUNTED CIRCUIT BOARD, HA R434 1-216-833-11 s METAL CHIP 10K 5% 1/10W R435 1-216-833-11 s METAL CHIP 10K 5% 1/10W 1-125-777-11 s CERAMIC CHIP 0.1UF 10.00% 10V...
Page 84
-------- ---------------------- L BOARD Q BOARD (FOR VPL-HS51) -------- ---------------------- Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description A-1057-962-A s MOUNTED CIRCUIT BOARD, L A-1086-165-A s MOUNTED CIRCUIT BOARD, Q C001 1-107-820-11 s CERAMIC CHIP 0.1UF 6V C5000 1-125-777-11 s CAPACITOR CERAMIC 0.1MF/10V...
Page 85
(Q BOARD (FOR VPL-HS51)) (Q BOARD (FOR VPL-HS51)) Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description CN5000 1-815-187-11 s JACK, MODULAR R5037 1-218-961-11 s RESISTOR, CHIP 4.7K 1/16W CN5002 1-770-625-21 s PIN, CONNECTOR 8P R5038 1-218-961-11 s RESISTOR, CHIP 4.7K 1/16W...
Page 86
-------- (Q BOARD (FOR VPL-HS51)) TA BOARD -------- Ref. No. Ref. No. or Q'ty Part No. SP Description or Q'ty Part No. SP Description RB6000 1-234-370-11 s RES, NETWORK 22X4 (1005) A-1086-806-A s MOUNTED CIRCUIT BOARD, TA RB6001 1-234-370-11 s RES, NETWORK 22X4...
Page 115
C (6/19) AD9981KSTZ-95 (IC702) C (8/19) SN74LVC125APWR-12 (IC900) C (8/19) MM1115XFBE (IC902) C (17/19) SN74LV125APWR (IC1801, IC1806, IC1808) AUTO CLAMP LEVEL ADJUST RAIN1 RED0-RED9 BUFF CLAMP 10-BIT ADC RAIN0 AUTO CLAMP LEVEL ADJUST GAIN1 CLAMP 10-BIT ADC GREEN0-GREEN9 GAIN0 AUTO CLAMP LEVEL ADJUST BAIN1 CLAMP...
Page 116
C (10/19) K4D263238F-UC50T (IC1102) C (12/19) ICS342M-05LF (IC1303) INPUT BUFFER OTP ROM WITH PLL DIVIDER 4 CLK1 VALUES PLL CLOCK SYNTHESIS , SPREAD SPECTRUM AND CK, CK DATA INPUT REGISTER CONTROL CIRCUITRY LDMI SERIAL TO PARALLEL BANK SELECT X1/CLK CRYSTAL 5 CLK2 OSCILLATOR 1Mx32...
Page 117
C (14/19,15/19,16/19) CXA7004R-T4 (IC1501, IC1502, IC1601, IC1602, IC1701, IC1702) C (14/19) TK11100CSCB-G (IC1504) C (18/19) BA00BC0WFP-E2 (IC1903-IC905, IC907) VOUT VREF DRIVER OVER HEAT & D_IN11 SID_OUT OVER CURRENT CONTROL PROTECTION CIRCUIT D_IN10 D_IN9 SIG_OUT1 Driver D_IN8 SIG_OUT2 Driver D_IN7 SIG_OUT3 BANDGAP REFERENCE Driver...
Page 118
TO THERMISTOR TO GA CN13 AC(N) AC(N) AC(L) AC(L) CN11 TO AC_INLET CN15 250V PRI_STBY PRI_STBY DC(-) DC(-) DC(+) DC(+) CN10 CN14 TO GA TO BALLAST 6-26 6-26 VPL-HS50/HS51...
Page 120
GA (2/2) GA (2/2) L301 200uH CN301 JL305 PRI_STBY D302 JL304 RM11C-V1 DC(-) RECT JL303 DC(+) L300 330uH IC300 FB300 MZ1540 1.1uH D300 D6SB80 MAIN RECT R300 (TO 1/2) C301 1/10W 450V RN-CP C300 0.47 450V C308 450V (TO 1/2) C302 470p C306...
Page 121
GA (1/2)STR-A6169 (IC100) GA (1/2) TK11133CSCL-G (IC102) STARTUP UVLO – INTERNAL LATCH DELAY OVER HEAT & – BIAS CONTROL OVER CURRENT CIRCUIT PROTECTION – POWER MOS FET OFF TIMER DRIVE PWM LATCH BANDGAP REFERENCE – BIAS – – BURST BLANKING –...
Page 128
PLL_1.5V (TO 1/2) PLL_1.5V (TO 1/2) PLL_GND (TO 1/2) PLL_GND (TO 1/2) R6000 R6000 R6005 R6005 SIO_RTC SIO_RTC XX XX Q (2/2) R6004 R6004 R6002 R6002 XX XX BT6000 BT6000 SCLK_RTC SCLK_RTC VPL-HS51 XX XX R6003 R6003 6-36 6-36 VPL-HS50/HS51...
Page 129
Q (1/2) AIC1117A-33PYJTR (IC5001) Q (2/2) M95640-WDW6TG (IC6002) Q (1/2) AIC1117A-PEJTR (IC5002) HOLD HIGH VOLTAGE CONTROL LOGIC GENERATOR CURRENT AMP. I/O SHIFT REGISTER – VREF 1.25V DATA ADDRESS REGISTER AND COUNTER REGISTER THERMAL CURRENT STATUS LIMIT LIMIT REGISTER SIZE OF THE READ ONLY 55µA EEPROM...
Page 136
F, HA, HB, L, NF F, HA, HB, L, NF -B SIDE- -A SIDE- SUFFIX: -11 SUFFIX: -11 -B SIDE- -A SIDE- SUFFIX: -11 SUFFIX: -11 -B SIDE- -A SIDE- -B SIDE- -A SIDE- SUFFIX: -11 SUFFIX: -11 SUFFIX: -11 SUFFIX: -11 -B SIDE- -A SIDE-...
Page 137
Q, TA, U, V Q, TA, U, V -B SIDE- -A SIDE- ---------------------- SUFFIX: -11 SUFFIX: -11 Q BOARD (1-864-778-11) ---------------------- VPL-HS51 VPL-HS51 *:B SIDE D5001 IC5004 D5002 IC6001 D5003 IC6002 D5004 IC6004 *A-2 D5006 D6000 Q6000 IC5000 TP5000 IC5001...
Page 139
SAFETY CHECK-OUT After correcting the original service problem, perform the following safety checks before releasing the set to the customer : Check the metal trim, “metallized” knobs, screws, and all other exposed metal parts for AC leakage. Check leakage as described below. LEAKAGE TEST The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to...