Replacing The Board; C Board - Sony VPL-HS51 Service Manual
Hide thumbs
Also See for VPL-HS51:
- Operating instructions manual (68 pages) ,
- Limited warranty (1 page) ,
- Operating instructions manual (68 pages)
Table of Contents
Advertisement
8. Disconnect the harness from the connector (CN201)
on the C board.
9. Remove the filter assembly.
10. Remove the rear panel.
Rear panel
Harness
CN201
Installation
11. Attach the rear cover and the rear panel in the reverse
order of steps 2 to 10.
12. Attach the base assembly.
1-4
Filter assembly
C board
1-4. Replacing the Board
1-4-1. C Board
Removal
1. Remove the base assembly. (Refer to Section 1-3-1.)
2. Remove the rear cover and connector panel assembly.
(Refer to steps 2 to 4 of Section 1-3-3.)
3. Remove the four screws and disconnect the harness
from the connector (CN14) on the F board.
4. Remove the shield plate (CU).
5. Disconnect all harnesses and flexible flat cables from
the connectors on the C board, then remove the C
board.
6. Remove the shield plate (CD) from the C board.
VPL-HS50/HS51
- Quick Links:
- Lamp Assembly
- Optical Block Assembly
Hide quick links:
Advertisement
Table of Contents
