5-1. CAMERA SECTION ADJUSTMENT
When performing adjustments, refer to the layout diagrams
for adjustment related parts beginning from page 5-26.
NTSC model : DCR-TRV5
PAL model :
DCR-TRV5E
1-1.
PREPARATIONS BEFORE ADJUSTMENT (CAMERA SECTION)
1-1-1.
List of Service Tools
• Oscilloscope
• Color monitor
Ref. No.
J-1
Filter for color temperature correction (C14)
ND filter 1.0
J-2
ND filter 0.3
J-3
Pattern box PTB-450
J-4
Color chart for pattern box
Adjustment remote commander (RM-95 upgraded).
J-5
(Note 1)
J-6
Siemens star chart
J-7
Clear chart for pattern box
J-8
Multi CPC jig
J-9
CPC-8 jig
J-10
Extension cable (80P, 0.4mm)
J-11
Power code (Note 2)
J-12
IR receiver jig
Note 1 : If the microprocessor IC in the adjustment remote commander is not the new microprocessor (UPD7503G-C56-12), the pages cannot be switched.
In this case, replace with the new microprocessor (8-759-148-35).
Note 2 : Connect the adjustment remote commander to the LANC jack, and set the HOLD switch to the "ADJ" side.
J-1
J-2
J-6
J-7
J-11
J-12
SECTION 5
ADJUSTMENTS
• Regulated power supply
• Digital voltmeter
Name
J-3
J-8
• Vectorscope
Parts Code
Auto white balance adjustment/check
J-6080-058-A
White balance adjustment/check
J-6080-808-A
White balance check
J-6080-818-A
White balance check
J-6082-200-A
J-6020-250-A
J-6082-053-B
J-6080-875-A
For checking the flange back
J-6080-621-A
J-6082-311-A
For adjusting the LCD
For adjusting the video section
J-6082-388-A
For adjusting the viewfinder
For extension between the DD-110 board (CN802) and
J-6082-395-A
the VC-207 board (CN010)
For connecting the battery terminal and DC power
J-6082-223-A
supply
J-6082-383-A
For adjusting the IR transmitter
J-4
J-9
Fig. 5-1-1.
5-1
DCR-TRV5/TRV5E
Usage
J-5
J-10