Initializing The C; Modification Of C; C Page Table - Sony DCR-TRV5 Service Manual
Digital video camera recorder
Hide thumbs
Also See for DCR-TRV5:
- Operating instructions manual (92 pages) ,
- Operating instructions manual (91 pages) ,
- Service manual (25 pages)
Table of Contents
Advertisement
Initial value
Address
NTSC PAL
B0
Fixed data-1
B1
(Initialized data)
B2
B3
B4
B5
B6
B7
B8
B9
BA
BB
BC
BD
BE
BF
C0
C1
C2
C3
C4
C5
C6
C7
C8
C9
CA
CB
CC
CD
CE
CF
D0
D1
Fixed data-2
D2
(Modified data, copy the data built in
D3
the same model.)
D4
D5
Fixed data-1
D6
(Initialized data)
D7
D8
D9
DA
DB
DC
DD
DE
DF
E0
Fixed data-2
E1
E2
E3
E4 to FF
Table 5-3-2.
Remark
5-36
4. Initializing the C Page Data
Note: If the page C data is initialized, the following adjustments must be
performed again.
1) Modification of C page data
2) Servo system adjustments
3) All RF block adjustments of the video system adjustments
Adjusting page
C
Adjusting Address
00 to 6F
Initializing Method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 4, address: 02, set data: 01, and press the PAUSE
button of the adjustment remote commander.
3) Check that the data of page: 4, address: 02 changes in order of
"01", "03", "05", "00".
4) Perform "Modification of C Page Data".
5. Modification of C Page Data
If the C Page data has been initialized, change the data of the "Fixed
data-2" address shown in the following table by manual input.
Modifying Method:
1) Before changing the data, select page: 0, address: 01, and set
data: 01.
2) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
Note: If copy the data built in the different model, the camcorder
may not operate.
3) When changing the data, press the PAUSE button of the
adjustment remote commander each time when setting new
data to write the data in the non-volatile memory.
4) Check that the data of adjustment addresses is the initial value.
If not, change the data to the initial value.
5) After changing the data, select page: 0, address: 01, and set
data: 00.
6. C Page Table
Note: Fixed data-1 : Initialized data. ( Refer to "4. Initializing the C Page
Data".)
Fixed data-2 : Modified data. (Refer to "5. Modification of C PAGE
Data").
Initial value
Address
NTSC PAL
00
Fixed data-1
01
Fixed data-2
02
Fixed data-1
03
04
05
06
07
08
Fixed data-2
09
Fixed data-1
0A
0B
0C
0D
0E
0F
10
11
Remark
Advertisement
Table of Contents
