Precaution; Setting The Switch; Order Of Adjustments; Subjects - Sony DCR-TRV5 Service Manual
Digital video camera recorder
Hide thumbs
Also See for DCR-TRV5:
- Operating instructions manual (92 pages) ,
- Operating instructions manual (91 pages) ,
- Service manual (25 pages)
Table of Contents
Advertisement
1-1-3.
Precaution
1. Setting the Switch
Unless otherwise specified, set the switches as follows and perform
adjustments without loading cassette.
1.
POWER switch (PS block) .................................... CAMERA
2.
DEMO MODE (Menu display) ....................................... OFF
3.
DIGITAL ZOOM (Menu display) ................................... OFF
4.
STEADY SHOT (Menu display) ..................................... OFF
5.
DISPLAY (Menu display) ................................. V-OUT/LCD
6.
DISPLAY (FP-699) ........................................................... ON
2. Order of Adjustments
Basically carry out adjustments in the order given.
Color bar chart standard picture frame
H
A B
A=B
Fig. a
(Video output terminal
output waveform)
3. Subjects
1) Color bar chart (Standard picture frame).
When performing adjustments using the color bar chart, adjust
the picture frame as shown in Fig. 5-1-4. (Standard picture
frame)
2) Clear chart (Standard picture frame)
Remove the color bar chart from the pattern box and insert a
clear chart in its place. (Do not perform zoom operations during
this time.)
3) Flange back adjustment chart
Make the chart shown in Fig. 5-1-5 using A0 size (1189 mm
841 mm) black and white vellum paper.
0
0.1msec
V
B A
Enlargement
Difference in level
A
B
Fig. 5-1-4
7.
FOCUS switch (FK block) ................................... MANUAL
8.
PROGRAM AE (Menu display) ..................................... Auto
9.
BACK LIGHT (FK block) ............................................... OFF
10. PICTURE EFFECT (Menu display) ................................ OFF
11. 16 : 9 WIDE (Menu display) ........................................... OFF
Fig. b (TV monitor picture)
Adjust the camera zoom and direction to
obtain the output waveform shown in Fig. a
and the TV monitor display shown in Fig. b.
Black
Note: Use matte vellum paper bigger than A0, and make sure the edges of
the black and white paper joined together are not rough.
5-4
Electronic beam scanning frame
CRT picture frame
White
841mm
1189mm
Fig. 5-1-5
Advertisement
Table of Contents
