White Balance Adjustment (Vf-124 Board) - Sony DCR-TRV5 Service Manual
Digital video camera recorder
Hide thumbs
Also See for DCR-TRV5:
- Operating instructions manual (92 pages) ,
- Operating instructions manual (91 pages) ,
- Service manual (25 pages)
Table of Contents
Advertisement
6. White Balance Adjustment (VF-124 board)
Correct the white balance.
If deviated, the reproduction of the EVF screen may degenerate.
Mode
Camera E-E
Subject
Arbitrary
Measurement Point
Check on EVF screen
Measuring Instrument
Adjustment Page
D
Adjustment Address
71, 72
Specified Value
The EVF screen should not be colored
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Input the following data to page: D, address: 88 to 8D.
Note: Press the PAUSE button of the adjustment remote commander
each time to set the data.
Address
88
89
Data
00
27
3) Select page: D, address: 71 and 72, set the data to the initial
value.
Note: Press the PAUSE button of the adjustment remote commander
each time to set the data.
Address
71
72
Data
80
80
4) Check that the LCD screen is not colored. If colored, change
the data of page: D, address: 71 and 72 so that the EVF screen
is not colored.
Note: To write in the non-volatile memory (EEPROM), press the
PAUSE button of the adjustment remote commander each time
to set the data.
5) Input the following data to page: D, address: 88 to 8D.
Note: Press the PAUSE button of the adjustment remote commander
each time to set the data.
Address
88
89
Data
38
00
6) Select page: 0, address: 01, and set data: 00.
8A
8B
8C
8D
00
00
00
00
8A
8B
8C
8D
02(NTSC)
20
20
00
00(PAL)
5-20
Advertisement
Table of Contents
